可拆装理论在展览设备设计中的应用

展览业是一个飞速发展的行业，它极大的促进了经济的发展。但我国展览设施也存在许多问题。这里通过对可拆卸设计和可装配设计的介绍，提出了在展览设备的设计过程中采用可拆卸与可装配设计的必要性，并介绍了一些设计原则。提出可拆装设计是实现资源可持续发展的设计。     

蝶阀加工及装配工艺的研究

传统工艺加工阀体、活门时，对机床的性能要求较高，一般为数控镗床。介绍了一种采用普通镗床加工阀体、活门的工艺方法及蝶阀在厂内装配的工艺方法。     

Assembly dimensional prediction for self-piercing riveted aluminum panels

Self-piercing riveting (SPR) is a high-speed mechanical fastening technique for joining sheet components. It has drawn more attention in recent years because it can join some advanced materials that are dissimilar, coated and hard to weld, such as aluminum sheets. Research results have shown that SPR improves joint properties in aluminum and steels. However, there has been concern that there might be dimensional issues due to relatively large material flows at SPR joint configurations. This paper presents the latest research progress in the assembly dimensional prediction area, using experimental data and finite element analysis results. It is found that the joint distortion of SPR as tested is much larger than that from resistance spot welding (RSW), and the inclusion of SPR joint distortion is generally needed for accurate global assembly predictions. To include the local SPR effect, a new algorithm to represent the SPR distortion has been developed. The new algorithm can be incorporated into special finite element analysis codes such as EAVS (elastic assembly variation simulation) to efficiently predict body assembly dimensions where spot joining processes are involved.     

15/25MN立捣卧挤炭素挤压机主机装配攻关

立捣卧挤炭素挤压机采用立式捣固预压,卧式挤压,旋转料室+延长料室结构,旋转料室和延伸料室均采用过盈配合,粗加工后要进行热装,压机整体高度较高,由于厂内不具备现场安装条件,导致装配难度很大,通过工艺和装配攻关,确定合理的安装方案,制作专用工装工具,采取相应措施,保证装配精度符合要求。     

冲模模架及装配技术

分析了冲模模型的基本类型，讨论了冲模模架的技术要求，介绍了标准模架的装配工艺，并指出了模架装配时的注意事项。     

级进模结构CAD中组件设计方法的研究

如何快速设计标准件和典型结构（组件）是提高级进模结构设计效率的关键之一，因此本文提出一基于3D装配模型的组件设计方法，并为此为基础，在UGⅡ上开发出相应的3D级进模CAD系统。     

PEMFC燃料电池三级电堆的装配分析

以提高PEMFC燃料电池电堆性能为目的,研究了电堆组装过程中加载方式和载荷对电堆接触电阻及电堆性能的影响。利用有限元分析软件ANSYS Workbench对三级电堆的装配过程进行有限元分析。分析了几种不同大小的载荷及不同的加载方式的装配对电堆性能的影响,对比了这几种情况下燃料电池堆的核心部件膜电极(MEA)组件的变形情况及应力分布情况,得出电堆的最佳装配载荷。该结果可为燃料电池电堆的装配提供较好的参考依据。     

A new hybrid improvement heuristic approach to simple straight and U-type assembly line balancing problems

This paper presents a new hybrid improvement heuristic approach to simple straight and U-type assembly line balancing problems which is based on the idea of adaptive learning approach and simulated annealing. The proposed approach uses a weight parameter to perturb task priorities of a solution to obtain improved solutions. The weight parameters are then modified using a learning strategy. The maximization of line efficiency (i.e., the minimization of the number of stations) and the equalization of workloads among stations (i.e., the minimization of the smoothness index or the minimization of the variation of workloads) are considered as the performance criteria. In order to clarify the proposed solution methodology, a well known problem taken from literature is solved. A computational study is conducted by solving a large number of benchmark problems available in the literature to compare the performance of the proposed approach to the existing methods such as simulated annealing and genetic algorithms. Some test instances taken from literature are also solved by the proposed approach. The results of the computational study show that the proposed approach performs quite effectively. It also yields optimal solutions for all test problems within a short computational time.     

''''C54x DSP混合编程及中断的C语言实现

为了充分发挥C语言和汇编语言各自的优势,在对TMS320C54x DSP进行软件开发时,可用两种语言混合编程.本文介绍了基于TMS320C54x DSP的C语言和汇编语言混合编程的程序设计方法,对用C语言实现DSP的中断功能进行了详细说明.最后以多尺度三次B样条小波分解算法为例说明TMS320C54x DSP混合编程的方法及步骤,并给出了C语言及汇编语言的源程序代码.