A new maritime lifesaving multiple-effect solar still design

This paper presents a new maritime lifesaving multiple-effect solar still design where several extended wicks feed seawater to their evaporating areas by capillary force, and the resulting water vapor diffuses and condenses on facing wicks with the condensate flowing through the wicks into storage bags. A theoretical analysis showed that a temperature drop through diffusion layers between evaporating and condensing wicks slowly increases in the main evaporating areas and rapidly near salt depositions whereas the evaporation rate decreases slowly in the main area and rapidly near salt depositions. These changes are caused by increases in salt concentrations and resulting boiling point elevation. With steady-state transfer analysis, the proposed still is predicted to produce about 15 kg m ⁻²d⁻¹ fresh water on a sunny day of 22 MJm⁻²d⁻¹ solar radiation, showing a potential to be a maritime lifesaving desalinator.     

Mechanisms of non-toxic anticorrosive pigments in organic waterborne coatings

Investigations have been carried out concerning the mechanism of the behaviour of non-toxic anticorrosive pigments belonging to the group of phosphates, ferrites and ion exchange pigments in waterborne systems. The mechanism controlling the protective effectiveness of organic coatings is complex and results from simultaneous activity of various agents, from among which the kind of the corrosion inhibitor and the structure of the coating are of fundamental importance. The effect of pigments on the protective properties of coatings was tested by means of electrochemical impedance spectroscopy (EIS), scanning vibrating electrode technique (SVET) as well as the salt spray and Prohesion tests. For the investigation of the structure of coatings the porosymetric method and modulated-force thermomechanical analysis (mf TMA) were applied. The results of these investigations have shown that calcium zinc phosphate and zinc ferrite are the most effective. These pigments take part in the passivation of steel, which has been proved by the results of electrochemical investigations and by the presence of the passive layers as has been found out by X-ray diffraction (XRD), energy dispersive X-ray analysis (EDXA) and scanning electron microscopy (SEM). Calcium zinc phosphate and zinc ferrite affect the structure of the coatings, increasing the glass transition temperature (Tg) of the coatings. Zinc phosphate and calcium-exchanged silica do not act in compliance with electrochemical mechanism neither do they improve the barrier properties of the binder.     

龙口市城乡一体化发展情况调查

摘 要 加快推进城乡一体化是破解“三农”问题、构建和谐社会的重大举措。该文通过对龙口市推进城 乡一体化进程的总体思路、取得的效果、存在的问题进行分析,提出发展经济、农村社区化建设、深化改 革3项推进城乡一体化进程的相关建议。     

Steady state multiplicity depending on coalescence in liquid—liquid continuous stirred reactors with reaction in the dispersed phase

The influence of drop coalescence and breakup on the existence of multiple steady states is studied for a two-phase stirred isothermal reactor where the chemical reaction in the d?ispersed phase obeys the rate expression ? r = kC/(1 + KC)². The random coalescence model developed by Curl was simulated using a modified Spielman and Levenspiel Monte Carlo technique.For certain range of the coalescence rate, Damköhler number, and dimensionless feed concentration, multiple steady states have been investigated.A special case has also been considered wherein the existence of multiple steady states for finite values of the coalescence rate is contrasted to the unique steady state solution for an infinite coalescence rate.     

Hydroisomerization of n-heptane and dehydration of 2-propanol on bulk and supported WO2(Hx)ac on TiO2

Characterization by XPS–UPS and XRD of commercial bulk WO₂ enabled us to identify the presence of four to five layers of WO₃ on the sample surface with an equal amount of W⁵⁺, possibly W₂₀O₅₈ in the interface. The presence of these WO₃ and W₂₀O₅₈ on the WO₂ surface were not detected by XRD. Exposure of commercial bulk WO₂ to hydrogen at temperatures higher than 673 K results in the reduction of surface WO₃ to WO₂ and the formation of the bifunctional WO₂(H_x)_ac phase on its surface. A complete conversion of surface WO₃ to WO₂(H_x)_ac has been obtained following the exposure of the sample to hydrogen for at least 6 h at 773 K. A conversion of 52% of n-heptane at 573 K reaction temperature and a selectivity of 90% in isomerization products, mainly 2,3-MH and multibranched molecules were obtained. The isomerization products distribution is in agreement with the statistical and thermodynamic equilibrium of the methyl-shift mechanism. The stability of the active WO₂(H_x)_ac phase has been tested under prolonged exposure to hydrogen and the reaction mixture. Similar results were obtained in the case of bulk WO₃ and WO₃/TiO₂ systems. Dehydration and dehydrogenation of 2-propanol were studied on these systems at 393 K reaction temperature.     

Effect of carrier type on coupled transport kinetics of thiocyanate ions through liquid membranes

Coupled transport of thiocyanate ions through a liquid membrane containing quaternary ammonium chloride salts in chloroform was examined. The influences of the carrier type in the membrane phase on the coupled transport of thiocyanate ions were investigated. The kinetics of the coupled transport were analyzed in the formalism of two consecutive irreversible first-order reactions and the kinetic parameters (k_1d, k_2m, k_2a, R_m^max, t_max, J_d^max, J_amax) were also calculated. For the coupled transport of thiocyanate ions, quaternary ammonium chloride salts having different carbon atom numbers (C_n) used as carriers were found to increase thiocyanate ions transport efficiency with increasing carbon atom numbers. Tetradecyl trimethylammonium chloride (TDTMACl), hexadecyl trimethylammonium chloride (HDTMACl), and tetraoctyl ammonium chloride (TOACl) were found to be the most effective carrier types for transport of thiocyanate ions when C_n is greater than 16. The activation energies for maximum membrane entrance and exit fluxes were calculated as 32.45 kJ/mol and 34.75 kJ/mol, respectively. The values of the activation energy indicate that the process is controlled by species diffusion.     

Gravure offset printing of polymer inks for conductors

A gravure offset printing process has been developed for Ag-filled polymer conductor ink. Pad printing and roller type printing have been used. Curing and electrical properties have been studied. A roller type of gravure offset printing has been used to evaluate the printing process and pad printing to print on the non-planar substrates. Based on differential scanning calorimetry (DSC) and resistivity measurements during ink curing, it was found that the ink had an optimum curing temperature of 140 °C. Square resistance of 300 and 150 μm wide lines can be as low as 20 and 28 mΩ/sq., respectively, for 7–8.5 μm thick line. The minimum line width was 70 μm. This minimum line width can be reduced with different ink solvents, but in this case the line thickness suffers and the square resistance increases, respectively.     

An FTIR/ATR in situ study of sorption and transport in corrosion protective organic coatings: Paper 2. The effects of temperature and isotopic dilution

A detailed temperature variation (18–50 °C) FTIR/ATR study of sorption and desorption of water into a series of cured epoxy resins has been reported. For higher temperatures (35–50 °C) the data were modelled with a single Fickian diffusion equation, giving an increased D as the temperature increased and an activation energy (E_A) in the 55–60 kJ mol⁻¹ region. At lower temperatures (18–35 °C)—well-below the T_g—a two-stage sorption equation was needed and the apparent E_A was negative. This is probably associated with changes in water clustering among the distributed ‘voids’ in the glassy polymer associated with chain relaxation at extended times. The use of D₂O as a penetrant allowed diffusion coefficient measurements for highly dense epoxy matrices, where FTIR/ATR cannot detect the ν(OH) band of water over and above the residual polymer–OH groups (in the dry state). The data for the D₂O studies were notably influenced by isotopic exchange; which was found to be a diffusion controlled process, even in a polymer matrix.     

Devitrification Kinetics and Mechanism of K2O–CaO–SrO–BaO–B2O3–SiO2 Glass-Ceramic

The devitrification kinetics and mechanism of a low-dielectric, low-temperature, cofirable K₂O–CaO–SrO–BaO–B₂O₃–SiO₂ glass-ceramic have been investigated. Crystalline phases including cristobalite (SiO₂) and pseudowollastonite ((Ca,Ba,Sr) SiO₃) are formed during firing. Activation energy analysis shows that the nucleation of the crystalline phases is controlled by phase separation of the glass. The crystallization kinetics of both cristobalite and pseudowollastonite obey Avrami-like behavior, and the results show an apparent activation energy close to that of the diffusion of alkaline and alkali ions in the glass, suggesting that diffusion is rate limiting. The above conclusion is further supported by analysis of measured growth rates.     

Measurement of Micro Kinetics of Hydrogenation in Liquid Phase Using Raman Spectroscopy

Hydrogenation of liquid organic hydrogen carriers is usually carried out in liquid phase. To measure the kinetics of this hydrogenation, an experimental setup using in situ Raman spectroscopy for analysis of the reaction mixture is proposed. With this setup it is possible to perform hydrogenation reactions at temperatures of up to 573 K and pressures up to 25 MPa. For validation of the experimental setup the hydrogenation of 1‐octene was measured in liquid phase. The reaction progress can be monitored in detail by Raman spectroscopy. To determine kinetic parameters from the experimental data, two modeling approaches were applied: a classic kinetic model and a thermodynamic kinetic model. The results were compared to literature data.