电容器行业用橡胶制品及其发展趋势

分析了应用于电容器行业中橡胶塞和橡胶盖板的国内现状，通过实验对比了国内外产品的差距，分析了进口和国产板材的logR-T曲线图。指出了应用于电容器行业的橡胶制品的要求，主要是提高橡胶塞的耐高温，耐热老化性能，提高橡胶复合盖板在高温下的绝缘性。     

大电流脉冲发生实验装置的研制

研制应用于高温超导脉冲特性研究的大电流脉冲实验装置,装置由充电回路、放电回路、测量系统、保护装置和控制回路组成.利用电容器储能,通过电感放电形成LC振荡回路,放电回路中利用二极管使通过试验样品的电流为单向脉冲电流,通过改变电容器储能电压、电感、电容参数,负载上可获得不同幅值、脉宽、频率的脉冲或振荡电流.装置试验达到要求,为超导装置失超与脉冲特性研究创造了实验条件.     

Effect of SiO2 addition on the dielectric properties and microstructure of BaTiO3-based ceramics in reducing sintering

The effect of SiO2 doping on the sintering behavior,microstructure,and dielectric properties of BaTiO3-based ceramics has been investigated.Silica was added to the BaTiO3-based powder prepared by the solid state method with 0.075mo1%,0.15mo1%,and 0.3mo1%,respectively.The SiO2-doped BaTiO3-based ceramic with high density and uniform grain size were obtained,which were sintered in reducing atmosphere.A scanning electron microscope,X-ray diffraction,and LCR meter were used to determine the microstructure as well as the dielectric properties.SiO2 can form a liquid phase belonging to the ternary system of BaO-TiO2-SiO2,leading to the formation of BaTiO3 ceramics with high density at a lower sintering temperature.The SiO2-doped BaTiO3-based ce-ramics can be sintered to a theoretical density higher than 95% at 1220℃ with a soaking time of 2 h.The dielectric constants of the sample with 0.15mo1% SiO2 addition sintered at 1220℃ is about 9000.Doping with a small amount of silica can improve the sinter-ing and dielectric properties of BaTiO3-based ceramics.     

Preparation and electrochemical characterization of activated carbons by chemical-physical activation

A process was proposed based on the combination of chemical and physical activation for the production of activated carbons used as the electrode material for electric double layer capacitor (EDLC). By material characterization and electrochemical methods, the influences of the activitation process on the specific surface area, pore structure and electrochemical properties of the activated carbons were investigated. The results show that specific surface area, the mesopore volume, and the specific capacitance increase with the increase of the mass ratio of KOH to char (m(KOH)/m(char)) and the activation time, respectively. When m(KOH)/m(char) is 4.0, the specific surface area and the mesopore volume reach the maximum values, i.e. 1 960 m²/g and 0.308 4 cm³/g, and the specific capacitance is 120.7 F/g synchronously. Compared with the chemical activation, the activated carbons prepared by chemical-physical activation show a larger mesopore volume, a higher ratio of mesopore and a larger specific capacitance. Foundation item: Project(2007BAE12B01) supported by the National Key Technology Research and Development Program of China     

Influence of nitrogen hetero-substitution on the electrochemical performance of coal-based activated carbons measured in non-aqueous electrolyte

Nitrogen-containing carbons were prepared by modification of activated carbons. The modified carbons were used as electrode materials with improved electrochemical performance. Precursor anthracite was activated by KOH (KOH: anthracite= 1:1), modified by melamine or urea and then treated at 1173 K to obtain the modified carbons. The porous structure, the chemical composition and the electrochemical characteristics of the carbons were investigated by nitrogen sorption, XPS and electrochemical methods respectively. Electrochemical experiments were performed in an organic electrolytic solution of 1 M (C2H5)4NBF4/PC.The samples modified by the different methods showed differences in chemical composition that introduced varying degrees of electrochemical performance enhancement. The presence of nitrogen enhanced the electron donor properties and the surface wettability of the activated carbons: this ensured a sufficient utilization of the exposed surface for charge storage.     

Bifurcation analysis for an SMIB power system with series capacitor compensation associated with sub-synchronous resonance

In this paper,an introduction to the bifurcation theory and its applicability to the study of sub-synchronous resonance (SSR) phenomenon in power system are presented. The continuation and bifurcation analysis software AUTO97 is adopted to investigate SSR for a single-machine-infinite-bus power system with series capacitor compensation. The investigation results show that SSR is the result of unstable limit cycle after bifurcation. When the system exhibits SSR, some complex periodical orbit bifurcations, such as torus bifurcation and periodical fold bifurcation, may happen with the variation of limit cycle. Furthermore, the initial operation condition may greatly influence the ultimate state of the system. The time-domain simulation is carried out to verify the effectiveness of the results obtained from the bifurcation analysis.     

陶瓷电容器的制备工艺概述

简介了新型陶瓷电容器的优点、功能、类型和发展现状及表面层陶瓷电容器、表面层型陶瓷电容器和晶界型陶瓷电容器的产生机理和区别，和影响陶瓷电容器性能的诸多因素，如显微结构、掺杂元素和包覆改性等；回顾了国内外陶瓷电容器的烧成工艺发展历史，如高温一次烧成、低温一次烧成、独石法和激光辐射法等；展望了陶瓷电容器在21世纪的研究和应用前景。     

基于超级电容的电梯能量再生系统

针对电梯采用制动电阻消耗回馈能量造成的极大浪费,介绍基于超级电容的电梯能量再生系统及其控制逻辑的设计。     

地铁再生制动储能装置参数设计

为了利用地铁列车制动过程产生的再生能量,维持牵引网电压的稳定,设计一种基于列车制动的超级电容型储能装置。根据北京地铁5号线的电动列车实际参数,通过对列车制动动力学和制动特性的对比和分析,更准确地计算出列车制动过程反馈到牵引网的再生能量;分析了储能装置的物理模型,根据限制条件确定了储能装置的主要参数和阵列配置;验证分析表明,该储能装置能满足地铁制动过程中各物理量的要求。     

Control strategy for energy recovery system in hybrid forklift

After analyzing the working condition of the conventional diesel forklift, an energy recovery system in hybrid forklift is considered and its simulation model is built. Then, the control strategy for the proposed energy recovery system is discussed, which is validated and evaluated by simulation. The simulation results show that the proposed control strategy can achieve balance of the power and keep the state of charge （SOC） of ultra capacitor in a reasonable range, and the fuel consumption can be reduced by about 20.8% compared with the conventional diesel forklift. Finally, the feasibility of the simulation results is experimentally verified based on the lifting energy recovery system.