Binary phase behavior of 1,3-distearoyl-2-oleoyl-sn-glycerol (SOS) and 1,3-distearoyl-2-linoleoyl-sn-glycerol (SLS)

The binary phase behavior of SOS (1,3-distearoyl-2-oleoyl-sn-glycerol) and SLS (1,3-distearoyl-2-linoleoyl-sn-glycerol) was examined by using DSC and conventional and synchrotron radiation X-ray diffraction. The solid-solution phases were observed in the metastable α and γ forms in all concentration ranges. Results indicated that the miscible γ form did not transform to the β′ form when the mixtures were subjected to simple cooling from a high-temperature liquid to a low-temperature solid phase. However, and α-melt-mediated transformation into β′ and β₂ resulted in the formation of immiscible phases in concentration ranges of SLS below 30%. By contrast, at SLS concentration ranges above 30%, the α-melt-mediated transformation caused crystallization of only the γ form, and β′ and β₂ crystals did not appear. These results show that the specific interactions between SOS and SLS are operative in the phase behavior of the mixture states of SOS and SLS.     

基于“二叉决策树”模型的嵌入式软件调试

在嵌入式软件开发过程中,软件不可避免地会出现各种错误,因此调试是软件生命周期中一个非常重要的环节。针对嵌入式软件开发的流程和特点,对其调试部分进行较为深入具体的研究和探索,提出基于调试器的"二叉决策树"调试模型。该模型描述了嵌入式软件调试的一般过程、调试对象和常用方法。实践表明"二叉决策树"调试模型具有较好的实用性和扩展性。     

Modification of margarine fats by enzymatic interesterification: Evaluation of a solid-fat-content-based exponential model with two groups of oil blends

Lipozyme TL IM-catalyzed interesterification for the modification of margarine fats was carried out in a batch reactor at 70°C with a lipase dosage of 4%. Solid fat content (SFC) was used to monitor the reaction progress. Lipase-catalyzed interesterification, which led to changes in the SFC, was assumed to be a first-order reversible reaction. Accordingly, the change in SFC vs. reaction time was described by an exponential model. The model contained three parameters, each with a particular physical or chemical meaning: (i) the initial SFC (SFC₀), (ii) the change in SFC (ΔSFC) from the initial to the equilibrium state, and (iii) the reaction rate constant value (k). SFC_o and ΔSFC were related to only the types of blends and the blend ratios. The rate constant k was related to lipase activity on a given oil blend. Evaluation of the model was carried out with two groups of oil blends, i.e., palm stearin/coconut oil in weight ratios of 90∶10, 80∶20, and 70∶30, and soybean oil/fully hydrogenated soybean oil in weight ratios of 80∶20, 65∶35, and 50∶50. Correlation coefficients higher than 0.99 between the experimental and predicted values were observed for SFC at temperatures above 30°C. The model is useful for predicting changes in the SFC during lipase-catalyzed interesterification with a selected group of oil blends. It also can be used to control the process when particular SFC values are targeted.     

基于VC＋＋的二叉树遍历算法演示软件的设计与实现

利用VC＋＋开发平台,以《数据结构》课程的重要章节二叉树遍历算法为例,论述二叉树遍历算法演示软件的设计和关键技术并实现整个系统。系统使得学生加深算法的理解,取得良好的教学效果。     

不确定切换时滞非线性系统状态切换的指数稳定性

利用状态依赖控制策略对切换信号进行设计,使得一类参数不确定时滞非线性切换系统指数稳定且具有一定的??∞抗干扰性能。利用Lyapunov-Krasovskii (LK)函数方法,以线性矩阵不等式组的方式,给出了稳定切换律存在的充分条件,并且该系统是指数稳定的。通过引入自由矩阵并结合积分不等式技巧,得到了保守性较低的稳定性条件。仿真算例表明了所提出方法的有效性和较低的保守性。     

整数的最佳带符号二进制表示的随机生成算法

整数的带符号数字(BSD)表示广泛应用于计算机算术、密码学、数字信号处理等领域。给定整数有多种最佳带符号二进制表示。对整数的最佳带符号二进制表示的性质进行研究,给出了整数的最佳带符号二进制表示随机生成算法,所得算法能快速产生给定整数的随机最佳带符号二进制表示。     

The removal of hydrogen sulfide with manganic sorbent in a high-temperature fluidized-bed reactor

The removal of hydrogen sulfide (H₂S) from simulated gas was carried out in a batch type fluidized-bed reactor using natural manganese ore (NMO), which consists of several metal oxides (MnO_x: 51.85%, FeO_y: 3.86%, CaO: 0.11%). The H₂S breakthrough curves were obtained by changing temperature, gas velocity, initial H₂S concentration, and aspect ratio. Moreover, the effects of the particle size and the particle-mixing fraction on H₂S removal were investigated in a binary system of different particle size. From this study, H₂S removal efficiency increased with increasing temperature but decreased with increasing excess gas velocity. The breakthrough time for H₂S decreased as the gas velocity increased, which leads to reducing gas-solid contacting due to gas bypassing in a fluidized bed reactor. Improvement of H₂S removal efficiency in continuous process can be expected from the results of the binary particle system with different size in a batch experiment. The NMO could be considered as a potential sorbent in H₂S removal.     

MCS-51系统DA A指令浅析

本文就单片机的DA A指令出现的前提、指令的调整规则、指令的其它功能几方面进行了全面的分析。关于本指令的调整规则,文章采用了完全列举法进行了证明,并举例进行了验证;对于指令"减1"的功能,也详细进行了说明,同时给出了实例进行了验证。     

Determination of solid fat content (SFC) of binary fat blends and use of these data to predict SFC of selected ternary fat blends containing low-erucic rapeseed oil

Several oils and fats often used for the industrial preparation of European shortenings were blended in binary systems. The equilibrium (after 48 h at 15°C) solid fat contents (SFC; determined by pulsed NMR spectroscopy) were measured and plotted against blend composition. SFC of the blends resulted from the SFC of each fat for the considered temperature as well as the type of interaction existing between those fats (namely, ideal behavior, monotectic interaction, eutectic interaction, and so on). The type of relationship fitted was dependent on the kind of interaction: Linear relationships were found for total compatibility between fats, and polynomial-type (order 2) relationships were found for fats exhibiting incompatibility. Some corresponding ternary oils and fats blends were also prepared and analyzed. Selected relationships (regression equations of the fitted curves) obtained for binary blends were combined in order to calculate the SFC of the corresponding ternary blends. Experimental values were generally close to predicted ones. The representation of SFC as a function of composition is interesting as it allows one to determine rapidly and easily the type of molecular interaction between two fats and also to determine equations that can be combined to calculate easily the SFC of corresponding ternary blends crystallized in the same way with a good accuracy. The texture (hardness) of several binary and ternary blends was also measured. The combination of the results obtained for SFC with the results obtained for the hardness of binary blends allows the prediction of the hardness of a corresponding ternary blend under the same conditions.     

一类含指数函数的Bézier型曲线的构造

曲线的设计与修改是CAD/CAM和数控技术研究的一个重要课题,具有广泛的应用背景.为了满足表示和设计复杂自由曲线的需求,论文构造了一类基于指数函数的曲线-E曲线,给出了基函数及E曲线的定义与性质.通过研究发现,所构造的E曲线具有Bézier曲线类似的一系列优良性质.