使用Visual C+ +实现串行通讯

以VisualC 为工具，探讨了在RS-232C接口协议下DTE设备之间通讯的实现问题。     

碳纳米管及稀土元素钇(Y)对高Ni含量Ti(C,N)基金属陶瓷组织与性能的影响

研究了不同含量的碳纳米管及0.8%稀土Y对高Ni含量Ti(C,N)基金属陶瓷组织性能的影响.将不同成分的试样分别于1400℃、1410 ℃、1420℃真空烧结,测试抗弯强度、洛氏硬度,观察背散射电子形貌、断口形貌并做能谱分析.结果表明,加入质量分数(下同)为0.8%Y及0.3%～1.0%的碳纳米管时,碳纳米管含量为0.5%的组织较均匀,芯壳结构明显,抗弯强度及硬度均较高.     

曲轴R处缺陷的超声探伤及定位问题的研究

针对曲轴R处缺陷的探伤和定位问题进行了探讨和研究,并设计了能对缺陷进行实时定位的程序.     

High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs

High resolution XPS analysis of chemical functionalised multi-wall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNT) was done with ESCA300 (overall instrument resolution of 0.35 eV). Information to the degree of functionalisation was ascertained by argon ion bombardment of the samples followed by XPS analysis to detect the functional groups, the percentage atomic concentration of various elements present and whether or not the detected functional groups imposed a chemical shift on the CNT atoms. The results show that true chemical functionalisation was achieved and by argon ion bombardment these functional groups can be altered relative to the C 1s carbon atoms of the CNT. The choice of chemicals used for functionalisation, the techniques employed and the types of nanotubes treated are important factors in chemical characterisation. The carbon atom on the nanotube ring to which the functional group (atom) is bonded, the chirality of the CNT, the electronegativity of the functional group, the bond type and whether the CNT is single-wall or multi-wall, or cut (short) could play a role in determining the chemical shift on the CNTs atoms. These investigations are relevant to chemical functionalisation of carbon nanotubes for various applications for example DNA sensors and other biomedical sensors.     

Technological parameters that influence the production of ozone in A .D. C. Corona discharfe

Experiments using dry oxygen in a wire–to–cylinder ozone generator, submitted to D.C. corona discharges show that technological parameters (diameter and composition of wire and cylinder, length of cell, gas flow and transit time of the gas) greatly influence ozone production. The cell geometry to be used depends on the polarity of the D.C. voltage applied to the wire and, for a predetermined design, the maximum ozone production rate will be obtained by seeking the most suitable gas flow. Lining up a series of optimized cells can give significant results.     

利用C++Builder对处理ESCR数据方法的改进

介绍一种利用C＋＋Builder编程工具自动处理聚乙烯环境应力开裂(ESCR)试验数据的方法。此方法利用计算机简化试验数据的处理过程,消除标准试验方法中作图法所引入的人为误差,并可以大幅度缩短试验时间。     

基于S3C6410的远程无线环境监测系统设计

从实际应用出发并结合近年来环境监测技术的发展趋势,设计了一套以S3C6410为主要硬件平台、以嵌入式Linux为主要软件平台的远程环境监测系统。该系统采用B/S架构,具有低成本、低功耗、高稳定的特点。用户通过Internet上的任何终端(如电脑、手机等)来访问该系统,可非常方便地对监测区域进行实时的监测。该系统支持多个用户同时登陆,兼容多种浏览器,具有较高的安全性,在环保行业、制造行业、交通行业的环境监测方面具有一定的推广应用价值。     

Flakes of natural carbyne in a diamond mine

Flakes of natural carbyne were found in Liao-Ning diamond mine, China, and examined by HRTEM, XRD and EDX. Lattice fringes and clear SAD patterns were obtained. The interlayer spacings obtained with SAD were in good agreement with those determined on the powders found in Ries crater meteorite by X-ray diffraction. However, they are different in color and shape, the one found in China being black and flaky, but the one in Ries crater meteorite being silver-white and particulate. It was assumed that carbyne might be stabilized by the intercalation of either Si or Fe in nature.     

ARM7处理器NUC710ADN扩充双网口设计

在ARM7处理器NUC710ADN的第一个网口的基础上,利用网口驱动芯片DM9000AEP扩充了第二个网口,使系统实现双网口通信。给出了硬件设计电路,对DM9000AEP的驱动程序在μClinux下的移植过程进行了描述,测试结果表明双网口都能正常可靠的工作,达到了ARM7处理器进行双网通信的功能要求。     

飞机碱性电瓶充放电参数测量仪的设计与研究

电瓶是民航飞机可靠供电的最后保证。飞机制造厂家提高了对电瓶的性能和容量检测要求,传统的电瓶充放电装置已经无法满足新的要求。利用单片机技术研制的飞机电瓶参数测试仪,实现了对电瓶各种参数的实时侧量和分析,为飞机电瓶维护和检测提供依据。