普光气田邻井干扰压降研究

根据普光气田现场资料,分析普光气田关井压降恢复时间和稳定生产时间的关系。建立邻井干扰计算模型,评价邻井干扰压降值及邻井干扰,并对邻井干扰规律进行敏感性分析。     

Interfacial Microstructure and Mechanical Properties of Al/Mg Butt Joints Made by MIG Welding Process with Zn-Cd Alloy as Interlayer

Butt joints between Mg alloy AZ31 B and pure Al 1 060 sheets were produced via metal inert gas welding process with Zn-Cd alloy foil. Crack-free Al/Mg butt joints between AZ31 B Mg alloy and pure Al 1060 sheets were obtained. Intermetallic compound layer 1 and layer 2 had formed in fusion zone/Mg alloy and the average thickness of the layer 1 was about 50 μm. The intermetallic compound layer 1 consisted of Al12Mg17 and Mg2Si phases while layer 2 consisted of Al12Mg17, Mg2Si and Mg Zn2 phases. The crack started from the IMC layer at the bottom of the joint and propagated along the brittle IMC layer, then expanded into weld metal during the SEM in situ tensile test. The highest tensile strength of the dissimilar metal butt joints could reach 46.8 MPa and the effect ofinterfacial IMC layer on mechanical property of the joint was discussed in detail in the present study.     

On the gas dynamics of HVOF thermal sprays

An experimental study of the gas-dynamic aspects of the high-velocity oxyfuel (HVOF) thermal spray process has been performed using commercially available HVOF equipment (Hobart-Tafa JP-5000, Ho-bart-Tafa Technologies, Inc., Concord, NH). Optical diagnostic techniques, including microsecond-expo-sure schlieren and shadowgraph imaging, were applied to visualize the hot supersonic jet produced by this equipment without particle injection. Rapid turbulent mixing of the jet with the surrounding atmos-phere was observed, which is an issue of concern in coating quality due to the possibility of oxidation of sprayed particles. This mixing appears to be a function of the ratio of densities of the hot jet and the cold atmosphere as well as a function of the velocity of the jet, rather than one of combustion-chamber pres-sure or barrel length. The supersonic core of the HVOF jet dissipates rapidly due to the mixing, so that the jet is no longer supersonic when it impinges on the target surface being sprayed. Secondary issues also observed in this study include strong jet-noise radiation from the HVOF plume and the entrainment and induced bulk motion of the surrounding air.     

CO2气体保护焊机操作注意事项

介绍了焊工在CO2气体保护焊机的安装、使用、维护保养及维修中的注意事项。     

连续碳分CO2吸收率分析及探讨

本文简述了CO2 气体吸收率的测定原理 ,着重分析了影响连续碳分CO2 气体吸收率的因素 ,提出了提高连续碳分CO2 气体吸收率的途径     

TBC experience in land- based gas turbines

This paper summarizes prior and on-going machine evaluations of thermal barrier coatings (TBC) for power generation, that is large industrial gas turbine applications. Rainbow testing of TBCs on turbine nozzles, shrouds, and buckets are described along with a test of combustor liners. General Electric Power Generation has conducted more than IS machine tests on TBC turbine nozzles with various coatings. TBC performance has been quite good, and additional testing, including TBCs on shrouds and buckets, is continuing. Included is a brief comparison of TBC requirements for power generation and aircraft turbines.     

天然气长输管道燃驱机组控制系统优化技术

燃气轮机驱动的压缩机组被广泛地应用在天然气长输管道,其控制系统优化技术的大范围深度应用在管道行业尚数首次,及时消除生产瓶颈的同时,也为涉及燃机的控制专业同行提供了技术借鉴,更重要的是为管道行业燃机运行提供了安全保障。     

考虑天然气混氢的园区综合能源系统电制氢优化配置

电制氢和天然气混氢技术在促进可再生能源消纳、降低系统碳排放量方面具有良好的理论研究和工程应用前景。面向含高比例可再生能源的园区综合能源系统,提出一种计及天然气混氢及跨季节存储的电制氢优化配置方法。首先梳理了含氢园区综合能源系统的运行框架和能量流动关系,建立园区内部能源生产、转换与存储设备的数学模型,其次以设备的年化投资成本、园区综合能源系统的年度运行成本和碳交易成本最优为目标,提出电制氢优化配置模型。最后通过算例分析表明电制氢及天然气混氢技术的引入可提升可再生能源的消纳能力,降低系统的整体经济成本和碳排放量,并分析了电解槽投资成本、混氢体积分数上限以及经济性和低碳性成本权重系数变化对规划运行结果的影响。关键词：园区综合能源系统;电制氢;天然气混氢;碳交易;跨季节储氢;优化配置 中图分类号：TM732     

Single-Atom Metal Sites Anchored Hydrogen-Bonded Organic Frameworks for Superior “Two-In-One” Photocatalytic Reaction

Photoredox catalysis is a green solution for organics transformation and CO₂ conversion into valuable fuels, meeting the challenges of sustainable energy and environmental concerns. However, the regulation of single-atomic active sites in organic framework not only influences the photoredox performance, but also limits the understanding of the relationship for photocatalytic selective organic conversion with CO₂ valorization into one reaction system. As a prototype, different single-atomic metal (M) sites (M²⁺ = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) in hydrogen-bonded organic frameworks (M-HOF) backbone with bridging structure of metal-nitrogen are constructed by a typical “two-in-one” strategy for superior photocatalytic C N coupling reactions integrated with CO₂ valorization. Remarkably, Zn-HOF achieves 100% conversion of benzylamine oxidative coupling reactions, 91% selectivity of N-benzylidenebenzylamine and CO₂ conversion in one photoredox cycle. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to synergic effect of atomically dispersed metal sites and HOF host, decreasing the reaction energy barriers, enhancing CO₂ adsorption and forming benzylcarbamic acid intermediate to promote the redox recycle. This work not only affords the rational design strategy of single-atom active sites in functional HOF, but also facilitates the fundamental insights upon the mechanism of versatile photoredox coupling reaction systems.