无机颜料的表面处理

介绍了无机颜料表面处理的作用及实现途径,并对其作用机理进行了分析,还叙述了表面活性剂的选择和处理方式。     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

MoNoC: A monitored network on chip with path adaptation mechanism

Complex systems on chip containing dozens of processing resources with critical communication requirements usually rely on the use of networks on chip (NoCs) as communication infrastructure. NoCs provide significant advantages over simpler infrastructures such as shared busses or point to point communication, including higher scalability, more efficient energy management, higher bandwidth and lower average latency. Applications running on NoCs with more than 10% of bandwidth usage attest that the most significant portion of message latencies refers to buffered packets waiting to enter the NoC, whereas the latency portion that depends on the packet traversing the NoC is sometimes negligible. This work presents an adaptive routing architecture, named Monitored NoC (MoNoC), which is based on a traffic monitoring mechanism and the exchange of high priority control packets. This method enables to adapt paths by choosing less congested routes. Practical experiments show that the proposed path adaptation is a fast process, enabling to transmit packets with smaller latencies, up to 9 times smaller, by using non-congested NoC regions.     

Polymer/surfactant interaction—Its relevance to detergent systems

The field of polymer/surfactant interaction is reviewed in this work. Results from two investigative methods,viz., dialysis and surface tension, are discussed, illustrating the main behavioral patterns and outlining the principles of the interactions. Next, aspects of the interaction phenomena that appear to have relevance to detergent formulation are presented. These include solution rheology, solubility control and surface conditioning. Lastly, the importance of surface activity of the polymer itself is stressed, culminating in a discussion of the properties of hydrophobically modified water-soluble polymers (“polymeric surfactants”), both alone and in the presence of conventional surfactants. Based on the Samuel Rosen Memorial Award lecture, given at the AOCS Annual Meeting, Anaheim, CA, April 1993.     

十二烷基苯磺酸钠水溶液聚集性质的研究

用滴体积法测出十二烷基苯磺酸钠（ＳＤＢＳ）稀水溶液的表面张力；然后求出其临界胶束浓度（ＣＭＣ）。同时通过溶液的电导率、吸收光谱以及荧光光谱测定求出其ＣＭＣ。这样测出的ＣＭＣ值为１．２～１．６×１０－３ｍｏｌ／Ｌ，与文献值相符。也研究了部分水解的聚丙烯酰胺（ＰＨＰＡＭ）对ＳＤＢＳ聚集性质的影响；发现ＳＤＢＳ的ＣＭＣ值随ＰＨＰＡＭ的加人而减少并且ＰＨＰＡＭ水溶液的粘度随ＳＤＢＳ的存在而急剧降低（类似盐效应）。这些方法与性质对强化采油（ＥＯＲ）是重要的。     

论港口危险货物运输装卸作业安全问题

危险货物作业安全越来越受到人们的关注，从危险货物的分类谈起，分析了危险货物港口运输装卸作业中易引发事故的诸因素和安全作业中应特别注意的几个问题，强调从业单位、从业人员的资质、法律意识和业务素质，制定危险货物事故应急预案等。提出了加强港口危险货物安全管理的有关建议：开展危险源与事故隐患的多层次监控；推进港航危险货物企业建立安全质量标准化体系；创建“抓小放大”的安全管理机制。     

A growth mark method for studying growth mechanism of carbon nanotube arrays

A novel and simple growth mark method was developed to make marks during the growth process of carbon nanotube arrays. These marks can be read out under scanning electron microscope or optical microscope. Based on this method, the growth rates at different temperatures and under different acetylene partial pressures were measured, from which the activation energy and the order of reaction were determined. Based on our experimental results, the growth of carbon nanotube arrays in our experimental condition could not be diffusion-limited. The measured activation energy could possibly be attributed to the heterogeneous decomposition of acetylene over the catalyst particle. Furthermore the marked array with special segmental structure may be found some applications in the future.     

Application of open-pit and underground mining technology for residual coal of end slopes

Given the conditions of residual coal from the boundary of a flat dipping open-pit mine,which uses strip areas mining and inner dumping with slope-covering,we propose an open-pit and underground integrated mining technology for residual coal of end slopes.In the proposal a conveyance road and ventilation conveyance near the slope are built,corresponding to the pit mining area and the surface coal mine dump,as well as an interval haulage tunnel and air-inlet tunnel.The outcome shows that such mining method may reduce the effect to slope stability from underground mining,it does not affect the dumping advance and has a high recovery rate of residual coal resources.The working face is timbered by single hydraulic props,transported by a scraper conveyor and supported by coal walls.This method of mining is one of layered top coal caving,with high resource recovery,low production cost where positive economic benefit can be realized.     

数控超声磨削陶瓷叶片型面刀位轨迹计算

介绍了陶瓷超声磨削加工现状,建立了平行直纹面数学模型.分析了用圆柱磨轮四轴数控超声磨削平行直纹面时原理误差,并提出减小误差的措施,计算出磨轮空间轨迹,并进行陶瓷叶片型面超声磨削加工工艺试验.试验结果表明,超声磨削加工陶瓷叶片型面是可行的,所完成的刀位计算可有效减小原理误差.