真空压铸的发展

真空系统是压铸过程中排除气体的最有效的方法之一。然而，真空压铸的发展几经起伏，现在则发展到一个新的阶段。从模具中抽出气体是几种抽气方法中较为简便的一种。真空气道的设计与常规气道则有所不同     

化学微交联聚氯乙烯的结构和性能

通过氯乙烯/邻苯二甲酸二烯丙酯(VC/DAP)悬浮共聚,合成了含部分凝胶结构的化学微交联PVC树脂,对微交联PVC的玻璃化转变行为、加工性能、消光性能、加热-形变行为和力学性能进行了研究。当DAP用量在0.25%mol以下时,PVC的玻璃化温度变动不大。凝胶含量的增加将导致交联PVC_d~T的光泽度下降,消光性能提高;塑化时间和加工扭矩均增加,加工性能急剧变差;加热变形值下降,最高使用温度提高。凝胶对PVC拉伸性能的影响较为复杂,但压缩永久变形则随凝胶含量的增加而下降,材料的弹性性能逐渐提高。     

Caching and optimized request routing in cloud-based content delivery systems

Geographically distributed cloud platforms enable an attractive approach to large-scale content delivery. Storage at various sites can be dynamically acquired from (and released back to) the cloud provider so as to support content caching, according to the current demands for the content from the different geographic regions. When storage is sufficiently expensive that not all content should be cached at all sites, two issues must be addressed: how should requests for content be routed to the cloud provider sites, and what policy should be used for caching content using the elastic storage resources obtained from the cloud provider. Existing approaches are typically designed for non-elastic storage and little is known about the optimal policies when minimizing the delivery costs for distributed elastic storage.In this paper, we propose an approach in which elastic storage resources are exploited using a simple dynamic caching policy, while request routing is updated periodically according to the solution of an optimization model. Use of pull-based dynamic caching, rather than push-based placement, provides robustness to unpredicted changes in request rates. We show that this robustness is provided at low cost. Even with fixed request rates, use of the dynamic caching policy typically yields content delivery cost within 10% of that with the optimal static placement. We compare request routing according to our optimization model to simpler baseline routing policies, and find that the baseline policies can yield greatly increased delivery cost relative to optimized routing. Finally, we present a lower-cost approximate solution algorithm for our routing optimization problem that yields content delivery cost within 2.5% of the optimal solution.     

Performance evaluation of electrodewatering system for sewage sludges

A laboratory-scale electrodewatering system, incorporating an electric field as an additional driving force to conventional pressure dewatering, has been developed to decrease the water content of sludges generated in wastewater treatment. Consisting of a piston-type filter press, a power supply and a data acquisition system, the electrodewatering system’s performance was evaluated as a function of applied pressure, applied voltage, sludge type and filtration time. Experiments were carried out using sewage sludges with the electric field up to 120 V/cm and pressure ranging from 98.1 to 392.4 kPa. Electrodewatering involving a combination of electric field and pressure enhances both the dewatering rate and final dewatered volume. The final water content of sewage sludges in the electrodewatering system can be reduced to 62 wt%, as compared to 78 wt% achieved with the pressure filtration alone. The electrodewatering system shows the potential to be an effective method for reducing the water content in sludges.     

混合指示剂单相滴定法测定烷基磷酸酯钾盐

本研究用混合指示剂单相滴定法测定ISO标准方法所不能测定的磷酸盐阴离子表面活性剂的浓度.测定PK、E502A、昆山PK的常数K分别为355.lg/M、420.7g/M和344.0g/M,变异系数分别为1.45%、0.59%和1.26%,测定实际试样的加标回收率为98.2～103.9%.方法准确、简单、快速,不需用毒性较大的有机溶剂,本法适用于化纤油剂和涤纶短纤维上油率等的测定.     

网站数据相关内容提取功能的设计与研究

本文根据内容提取的相关知识,以及它们在用户浏览信息时的应用,提出了内容匹配的高效算法,重点研究提取信息时如何提高匹配精度。通过这种算法,系统预测用户可能感兴趣的文章,并按感兴趣的程度向用户提供内容导航,得到一个个性化的相关信息显示页面。     

水平井均匀酸化管柱在八面河油田的研究与应用

八面河油田水平井水平井段长、储层非均质性严重,在酸化处理中,井段均匀布酸困难,酸化效果不佳。根据在全井段均匀分配酸化液的原则,对水平井均匀酸化管柱进行优化,采用"大酸量、大排量、及时返排"的工艺措施,可有效解除水平井段地层污染堵塞,沟通地层裂缝,使水平井的酸化处理效果得到明显改善和提高。