浅谈试验室对混凝土拌合站的质量管理

从水泥、粗细集料、水、外加剂等方面阐述了试验室对拌合站所用原材料的质量控制，论述了试验室对拌合站计量设备的质量管理，并对拌合站混凝土的质量控制、混凝土试件制作等方面进行了介绍，以真正的管理好混凝土拌合站。     

可燃气体检测报警系统的分析和检修

分析可燃气体检测报警系统的组成和检修方法，并列举了根据故障现象进行分析和检修的实例。     

节能型铝合金连续熔化－去气炉

介绍一种用于铝合金的连续熔化－去气的节能装置。着重讨论了此装置的结构和操作要点以及影响铝合金质量的因素。文中对比了此装置与传统阶段式熔化系统操作上的异同点。分析了连续熔化炉的经济效益。研究表明毛坯耗电量下降８５％，并可减少合金元素加入量以及坩埚和加热元件的消耗。铸件质量合格。     

Current ISI and monitoring technologies in European energy industries

This paper reviews available information on the state of practice of inservice material property monitoring performed in European energy industries. Current practice includes a range of standard nondestructive testing and monitoring methods, improved remote sampling and surveillance specimen testing, and new monitoring techniques which are emerging from ongoing development programs. These new technologies include ultrasonic, positron annihilation, neutron diffraction, and magnetic techniques.     

高强度船板纵裂纹的成因及预防

针对高强度船板纵裂纹轧后退废过高的现状，分析原因并优化冶炼、连铸工艺及操作，有效地降低高强度船板的退废率。     

3t电渣钢9Cr2Mo工艺实践

为进一步提高冷轧辊电渣锭的内(外)质量、降低生产成本的要求,贵阳特钢采用400mm×300mm矩形连铸坯取代(φ)330mm铸锭做为电渣母材,在计算机全过程自动控制下,实现1支自耗电极重熔1支3吨电渣锭9Cr2Mo.电渣冶炼的填充比由初期的0.347提高到0.487,电渣锭成锭率由91.17%提高到96.87%,电渣重熔电耗由1762kWh/t下将到1477 kWh/t.     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

转炉冶炼20管坯钢生产实践

介绍了20#管坯钢的生产试验工艺，采取了拉碳法脱碳、钢包底吹氩及喂丝、保护浇铸、合理控制拉速等有效措施，解决了生产中存在的质量问题，为下一步的生产提供了理论和实践依据。     

K202A压缩机电机轴瓦超温的原因及对策

K202A压缩机的电机轴瓦采用的是动压轴承,经常持续升温。其主要原因是由于滑动轴承和轴之间是半液体摩擦,润滑油在轴颈及轴瓦之间没有形成具有足够压力的油膜,造成滑动轴承和轴局部形成半液体摩擦而产生大量的热量,又无法被带走引起的。文章通过验算K202压缩机电机滑动轴承温度,分析影响滑动轴承运行温度的因素,提出在原滑动轴承上开油楔及加装一台齿轮油泵为滑动轴承强制润滑,并且通过联轴器把电机和压缩机连接起来,用压缩机轴瓦托起电机轴,使电机轴颈和轴瓦之间处于液体摩擦状态,可有效地降低滑动轴承的运行温度。     

Diagnostic Data Compression Techniques for Embedded Memories with Built-In Self-Test

A system-on-chip (SOC) usually consists of many memory cores with different sizes and functionality, and they typically represent a significant portion of the SOC and therefore dominate its yield. Diagnostics for yield enhancement of the memory cores thus is a very important issue. In this paper we present two data compression techniques that can be used to speed up the transmission of diagnostic data from the embedded RAM built-in self-test (BIST) circuit that has diagnostic support to the external tester. The proposed syndrome-accumulation approach compresses the faulty-cell address and March syndrome to about 28% of the original size on average under the March-17N diagnostic test algorithm. The key component of the compressor is a novel syndrome-accumulation circuit, which can be realized by a content-addressable memory. Experimental results show that the area overhead is about 0.9% for a 1Mb SRAM with 164 faults. A tree-based compression technique for word-oriented memories is also presented. By using a simplified Huffman coding scheme and partitioning each 256-bit Hamming syndrome into fixed-size symbols, the average compression ratio (size of original data to that of compressed data) is about 10, assuming 16-bit symbols. Also, the additional hardware to implement the tree-based compressor is very small. The proposed compression techniques effectively reduce the memory diagnosis time as well as the tester storage requirement.