长脉冲激光沉积原位生成YBaCuO超导膜

用长脉冲激光(脉冲宽度150μs,波长1.06μm)辐照高温烧结的YBa_2Cu_3O_(7-x)靶,在6Pa的氧气压强下,巳在(100)YSZ单晶衬底上原位生成YBa_2Cu_(?)O_(7-x)超导膜。衬底置于750℃的加热器上,衬底与靶之间的距离5cm,用该法制得的薄膜光亮坚实,正常态呈金属性,零电阻温度为84.7K。用XRD和SEM对薄膜进行了分析研究。     

Copper bioavailability from breakfasts containing tea. Influence of the addition of milk

The influence of drinking tea on copper bioavailability is unclear, particularly when tea is consumed with food. A breakfast meal containing white bread, margarine, strawberry jam, cheese and tea, with or without milk, was digested in; vitro and the dialysis of copper investigated. Reference breakfasts were prepared with water and water with milk. Copper dialysability (percentage of copper dialysed) was markedly increased by tea. The influence of adding milk to tea was not significant. A second study was carried out in rats using the breakfasts containing tea and water. They were spiked with ⁶⁴Cu and given orally to the animals in a single dose. Whole-body ⁶⁴Cu retention was measured over a 4-day period after administration. In order to determine the true absorption of ⁶⁴Cu a control group of rats received the dose intraperitioneally. The results in vivo indicate a tendency to higher absorption and retention of ⁶⁴Cu with tea. Liver ⁶⁴Cu retention was significantly elevated by tea. Therefore, the presence of tea in a breakfast meal favours the formation of soluble low-molecular-weight ligands which can be absorbed and retained by rats. The concomitant increase in liver copper retetition may be associated with higher bioavailability and/or lower copper mobilisation.     

铜基催化剂孔隙率对气体有效扩散系数的影响

研究了18种具有不同孔结构参数的粒状铜基甲醇合成催化剂孔隙率对有效扩散系数的影响。结果发现，催化剂微孔孔隙率增大，曲节因子亦增大，扩散阻力增加。将孔隙率与催化剂曲节因子关联，得到了半经验方程，用它可估算催化剂的曲节因子。     

Homogeneous Plastic Flow of Fully Amorphous and Partially Crystallized Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5) Bulk Metallic Glass

The homogeneous plastic flow of fully amorphous and partially crystallized Zr(41.2)Ti(13.8)Cu(12.5)Ni(10)Be(22.5) bulk metallic glass (Vitl) has been investigated by compression tests at high temperatures in supercooled liquid region. Experimental results show that at sufficiently low strain rates, the supercooled liquid of the fully amorphous alloy reveals Newtonian flow with a linear relationship between the flow stress and strain rate. As the strain rate is increased, a transition from linear Newtonian to nonlinear flow is detected, which can be explained by the transition state theory. Over the entire strain rate interval investigated, however, only nonlinear flow is present in the partially crystallized alloy, and the flow stress for each strain rate is much higher. It is found that the strain rate-stress relationship for the partially crystaltized alloy at the given temperature of 646 K also obeys the sinh law derived from the transition state theory, similar to that of the initial homogeneous amo     

Direct atomic scale analysis of the distribution of Cu valence states in Cu/γ-Al2O3 catalysts

In this paper, the microstructure of a 1 wt.% Cu/γ-Al₂O₃ catalyst that was reduced in a 4% hydrogen/argon atmosphere at temperatures of 523, 773 and 1073 K, is studied by Z-contrast imaging and electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Results show that the copper species are well dispersed when the catalyst is reduced below 523 K. At 773 K, separated Cu(I) and Cu(0) species are found existing as ring-like and bulk-like particles. This appears to indicate that the copper has not been reduced to its metallic form due to the interaction between the copper oxide and the support. Large spherical particles having core-shell structures with Cu(I) in the shells and Cu(0) in the cores are generated when the catalyst is reduced at 1073 K. The formation of partially oxidized copper species upon reduction at 1073 K is attributed to the metallic copper interaction with the alumina support. This study also demonstrates that high-spatial resolution Z-contrast imaging and EELS performed simultaneously can provide unique information on the morphology and chemistry of metal species in supported metal catalysts.     

Cu/ZrO2催化剂的研究进展及其应用

综述了催化剂Cu／ZrO2的制备方法及其在CO／H2、CO2／H2合成甲醇、NOx的分解、醇胺脱氢合成氨基酸、CO的氧化及CO＋NO反应等方面的应用。     

Diffusion and influence of Cu on properties of CdTe thin films and CdTe/CdS cells

The effective diffusion coefficients of Cu for thermal and photodiffusion in the CdTe films have been estimated from resistivity versus duration of thermal or photoannealing curves. In the temperature range 60–200°C the effective coefficient of thermal diffusion (D_t) and photodiffusion (D_ph) are described as D_t=7.3×10⁻⁷exp(−0.33/kT) and D_ph=4.7×10⁻⁸exp(−0.20/kT).It is found that the diffusion doping of CdTe thin films by Cu at 400°C results in a sharp decrease of resistivity up to 7 orders of magnitude of p-type material, depending on thickness of Cu film. The comparative study of performance of CdTe(Cu)/CdS and CdTe/CdS cells has been studied. It is shown that the diffusion doping of CdTe film by Cu increases efficiency of CdTe(Cu)/CdS cells from 0.9% to 6.8%. The degradation of photovoltaic parameters of CdTe(Cu)/CdS cell, during testing under forward and reverse bias at room temperature, proceeds at a larger rate than those of CdTe/CdS cell without Cu. The degradation of performance of CdTe(Cu)/CdS cells is tentatively assigned to electrodiffusion of Cu in CdTe, resulting in redistribution of concentration of Cu-related centers in CdTe film and heterojunction region.     

进一步降低钼精矿中铜、铅含量的生产实践

分析了钼精矿Cu、Pb含量高的主要原因 ,通过实施一系列措施 ,达到了降低钼精矿中Cu、Pb含量的目的     

SFG and DFG investigation of Au(111), Au(210), polycrystalline Au,Au–Cu and Au–Ag–Cu electrodes in contact with aqueous solutions containing KCN and 4-cyanopyridine

We report on potential-dependent in situ SFG and DFG spectroscopy carried out at Au(111), Au(210), polycrystalline Au, Au–Cu and Au–Ag–Cu electrodes in contact with aqueous solutions containing CN⁻ and 4-cyanopyridine (4CP). Spectroelectrochemical work was complemented by cyclic voltammetry. The chief stress has been placed on systematising and quantifying the interaction between 4CP and CN⁻ and the attending effects on the vibrational and electronic structures of the interface. The voltammetric behaviour of the investigated electrodes, modified by the addition of 4CP to the CN⁻ electrolyte, denote changes in the CN⁻ adsorption characteristics and effects of the adsorbed CN⁻ layer on the electrodic reactivity of 4CP. The differences among the investigated electrodes can be explained in terms of their respective degrees of atomic packing or with alloying effects on the stability of adsorbed CN⁻. The potential-dependent spectra have been analysed quantitatively with a model for the second order non linear susceptibility accounting for vibrational and electronic effects. The spectral changes induced by addition of 4CP denote interaction of the aromatic with the electrode through the CN⁻ monolayer. The non-resonant contribution yields information on the effects of 4CP on the fine structure of the bound electron density of states.     

常速度梯度射线追踪与二维层速度反演

速度问题是勘探地震学的核心 ,可以借助常速度梯度射线追踪方法 ,从反演的角度探讨速度建模问题。在射线追踪方面 ,从程函方程出发 ,将复杂的速度场剖分成小的矩形单元 ,并假设在每个矩形单元内速度具有常速度梯度 ,由此导出的一组常速度梯度射线追踪公式 ,可实现非均匀介质的射线追踪 ,具有适应性强、精度高和快速的优点。在层速度反演方面 ,采用相干速度反演的思想 ,根据各向同性介质中 ,零偏移距射线在界面处是法向入射的原理 ,建立了合成共中心点道集与射线深度偏移的正反演关系 ,由此利用合成共中心点道集与观测的共中心点道集逼近 ,采用层剥离方法进行层速度反演。通过理论推导与模型试算得到如下的认识与结论 :常速度梯度射线追踪具有较高的计算精度与效率 ,公式采用向量形式很容易推广到三维 ;确定层速度采用的是正反演相结合的方法 ,可得到稳定的速度场 ;该方法屏弃了基于双曲时矩关系确定层速度场的假设 ,使其能适应任意的速度分布。