Fracture and impact properties of modified nylon 11

Supertough nylon 11 is prepared by using a plasticizer. The influence of plasticizers on the impact property and tensile properties of plasticized nylon 11 were investigated. The results show that the impact strength is improved remarkably by methylbenzene sulfonamide, and the tensile strength is almost the same as that of natural‐grade nylon 11. The study of the fracture morphology on plasticized supertough nylon 11 indicates that the fracture surface of plasticized supertough nylon 11 has a special feature, which is different from the fracture surface of general ductile polymer materials. It is similar to that of a multilayer distorted lamellar structure. There are many oriented fibrillar clusters on each layer, which are perpendicular to the impact direction. This was a new breaking phenomenon, which is found on supertough nylon 11. In regard to the experimental results, a “multilayer crack extension” mechanism is put forward. The fracture of supertough nylon 6 also verified this mechanism. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1600–1607, 2002     

11-氨基十一酸的合成

采用催化氨解方法 ,对以 11 溴代十一酸为原料合成 11 氨基十一酸的反应条件进行了研究。实验结果表明 ,氨解反应的最佳工艺条件为反应温度 2 0℃ ;反应时间 2 4h ;m(11 溴代十一酸 )∶m (催化剂 ) =2 0∶1;n (氨 )∶n (11 溴代十一酸 ) =9∶1,上述条件下 ,氨解反应收率达 70 %。与现有工艺相比 ,提高了氨解反应收率。     

Synthesis of AlPO4 Molecular Sieves with AFI and AEL Structures by Dry-Gel Conversion Method and Catalytic Application of Their SAPO Counterparts on Isopropylation of Biphenyl

AlPO₄-5 and AlPO₄-11 were synthesized by dry-gel conversion (DGC) method. Steam-assisted conversion (SAC) and vapor-phase transport (VPT) techniques were applied for this purpose. The synthesis was successful in presence of a certain minimum amount of external bulk water, without which the crystallization failed. Crystallization by VPT method was slower than corresponding SAC and HTS method. SAPO analogs of the samples, SAPO-5 and SAPO-11 were also synthesized by DGC method. Samples made by DGC methods had higher yield than the conventional hydrothermal synthesis (HTS); otherwise the samples showed similar characteristics as that made by HTS. XRD, SEM and N₂-adsorption results showed high crystallinity and purity of the samples made by DGC, and ²⁷Al MAS NMR spectra indicated the tetrahedral framework nature of Al. SAPO-5 and SAPO-11 were tested for their catalytic activity in isopropylation of biphenyl, and in terms of conversion and selectivity, SAPO-5 was found to be suitable for this application.     

Sex pheromones of male yellowfin Baikal sculpin (Cottocomephorus grewingki): Isolation and chemical studies

Three components of the male yellowfin Baikal sculpin pheromonal signal have been isolated from urine by diethyl ether extraction, thinayer chromatography (TLC), and high-performance liquid chromatography (HPLC). Using mass spectrometry, we have identified two of them as testosterone (T) and 11-hydroxytestosterone (11HT). These steroids are synthesized in testes during full spermatogenesis, and they are excreted in male urine with milt. The third component is not a steroid. It is more likely to be a polyene alcohol (farnesol). 2Z,6E-Farnesol possesses behavioral activity.     

尼龙11的性能、合成及应用

尼龙11是一种综合性能良好的工程塑料，笔者综述了尼龙11的国内外研究概况，介绍了其物理、化学、力学等各方面的性能及其生产工艺，并概述了其在汽车、电子电气、军工等领域的应用，对其发展前景进行了展望。     

Sex Pheromone Components of the Bronzed Cutworm, Nephelodes minians, a Prey Species of a Bolas Spider, Mastophora hutchinsoni

The bolas spider, Mastophora hutchinsoni, attracts adult males of four species of moths by aggressively mimicking their sex pheromone. Here, we report the identification of two sex pheromone components of one of these species, the bronzed cutworm, Nephelodes minians. Simultaneous gas chromatographic (flame ionization detection) and electroantennographic detection (EAD) analysis of extracts of the sex pheromone glands of female N. minians indicated two components eliciting strong EAD responses from a conspecific male antenna that corresponded in retention time with (Z)-11-hexadecenal (Z11-16:Ald) and (Z)-11-hexadecenyl acetate (Z11-16:OAc), using both polar and nonpolar columns. Mass spectra of these two peaks were identical to those of synthetic Z11-16:Ald and Z11-16:OAc. The double-bond positions were confirmed by GC-MS analysis of dimethyl disulfide derivatives of the putative pheromone components. In a field test, a 5:1 blend of Z11-16:Ald to Z11-16:OAc attracted male N. minians. Overall, there is no overlap in the chemical constituents of the sex pheromones of three moth species preyed upon by this bolas spider for which pheromones have now been identified. These studies suggest that bolas spiders are versatile in their ability to synthesize semiochemicals for different prey species. This versatility may be advantageous to a predator that has an otherwise extremely specialized hunting tactic.     

Sex pheromone of tomato fruit borer, Neoleucinodes elegantalis

Five candidate pheromone components were identified by analyzing pheromone gland extracts by gas chromatography (GC), coupled GC-electroantennographic detection (EAD), and coupled GC-mass spectrometry (MS): (E)-11-hexadecenol(E11–16 : OH), (Z)-11-hexadecenol (Z11–16 : OH),(E)-11-hexadecenal, (E)-11-hexadecenyl acetate, and (Z)-3,(Z)-6,(Z)-9-tricosatriene (Z3,Z6,Z9–23 : Hy). In electroantennogram (EAG) recordings, synthetic E11–16 : OH elicited stronger antennal responses at low doses than other candidate pheromone components. Field tests demonstrated that synthetic E11–16 : OH as a trap bait was effective in attracting males, whereas addition of Z11–16 : OH inhibited the males' response. Z3,Z6,Z9–23 : Hy strongly enhanced attractiveness of E11–16 : OH, but was not attractive by itself. A pheromone blend with synergistic behavioral activity of an alcohol (E11–16 : OH) and hydrocarbon (Z3,Z6,Z9–23 : Hy) component is most unusual in the Lepidoptera. The synthetic two-component pheromone is approximately 60 times more attractive than the female-produced blend and might facilitate the control of this pest.     

Selective Enrichment of Conjugated Linoleic Acid Isomers in Their Mixtures Using Combined Chemical and Enzymatic Methods

The aim of this study was to selectively enrich t10,c12-conjugated linoleic acid (t10,c12-CLA) and c9,t11-CLA in commercial CLA mixtures using a combination of urea crystallization and lipase-catalyzed esterification. The objective of the urea fractionation is to remove saturated and monounsaturated fatty acids (FA) from the CLA mixtures. CLA-enriched free FA (FFA) mixtures containing 53.8 wt% t10,c12-CLA and 39.1 wt% c9,t11-CLA were produced from the CLA mixtures containing ~34 wt% each of the two CLA isomers by a urea crystallization using methanol and the urea-to-FA weight ratio of 2.5:1. The CLA-enriched FFA mixtures were partially esterified with dodecan-1-ol in a recirculating packed-bed reactor using an immobilized lipase from Candida rugosa to further enrich the t10,c12-CLA and c9,t11-CLA in an FFA fraction and an FA dodecyl ester fraction, respectively, under the optimal conditions, i.e., temperature, 20 °C; FA-to-dodecan-1-ol molar ratio, 1:1; water content, 2 wt% of total substrates; residence time, 5 min; and reaction time, 24 h (for t10,c12-CLA enrichment) and 12 h (for c9,t11-CLA enrichment). After the reaction, an FFA fraction with 72.6 wt% t10,c12-CLA was obtained. Another FFA fraction with 62.0 wt% c9,t11-CLA was recovered after the saponification of the FA dodecyl ester fraction. The yields of t10,c12-CLA and c9,t11-CLA in the FFA fractions were 43.6 and 21.5 wt%, respectively, based on their initial weights in the CLA mixtures.     

响应面法优化Ni-P/APO-11非晶态催化剂催化松节油加氢反应

以二异丙胺、氢氧化铝为原料,采用水热合成法制得APO-11磷酸铝分子筛。采用化学还原法制备非晶态Ni-P/APO-11催化剂用于α-蒎烯加氢反应,考察了α-蒎烯加氢反应条件,通过响应面法实现进一步优化,而后采用XRD、BET、SEM、XPS、ICP等对该催化剂进行了表征。结果显示,在反应温度124.8℃,反应压力4.9 MPa,催化剂用量6.3%,反应时间90 min时,α-蒎烯转化率为99.45%,顺式蒎烷选择性97.35%。为进一步拓宽该催化剂使用范围及提高松节油体系的深加工利用水平,将该催化剂用于松节油其他组分的加氢反应中,展现出良好的催化活性,原料转化率均可达到99%以上,选择性65%以上。     

11α hydroxylation of 16α, 17‐epoxyprogesterone in biphasic ionic liquid/water system by Aspergillus ochraceus

BACKGROUND: The improved efficiency of steroid biotransformation using the biphasic system is generally attributed to the positive effect on the solubility of substrate in aqueous media. A promising alternative for the application of organic solvents in biphasic systems is the use of ionic liquids (ILs). This study aims to investigate the applicability of the biphasic ILs/water system for 11α hydroxylation of 16α, 17‐epoxyprogesterone (HEP) by Aspergillus ochraceus. RESULTS: Of the seven ILs tested, [C₃mim][PF₆] exhibited the best biocompatibility, with markedly improved biotransformation efficiency. In the [C₃mim][PF₆]‐based biphasic system, substrate conversion reached 90% under the condition in which buffer pH, volume ratio of buffer to ILs, cell concentration, and substrate concentration were 4.8, 10/1, 165 g L^?1 and 20 g L^?1, respectively. This is more efficient than that of the monophasic aqueous system. The effects of the cations and anions of these ILs on the 11α hydroxylation of 16α, 17‐epoxyprogesterone (HEP) by A. ochraceus is also discussed. CONCLUSION: The above results showed that IL/water biphasic system improved the efficiency of 11α hydroxylation of 16α, 17‐epoxyprogesterone (HEP) by A. ochraceus, thus suggesting the potential industrial application of ILs‐based biphasic systems for steroid biotransformation. © 2012 Society of Chemical Industry