Side-contact of sharp indenters, including the effects of friction

When a sharp-edged indenter is pressed into a half-plane material in the half-plane is displaced and ‘laps around’ the edges of the punch, possibly making contact with the side faces. This phenomenon is quantified within (coupled) half-plane theory, and applied first to an idealised indenter having the cross section of a trapezium, and then to a semi-infinite indenter. The latter allows an asymptotic form to be found which, through a generalised stress intensity factor may be collocated into the edge of any notionally sharp-edged indentation problem.     

A reliable modifier-adaptation strategy for real-time optimization

In model-based real-time optimization, plant-model mismatch can be handled by applying bias- and gradient-corrections to the cost and constraint functions in an iterative optimization procedure. One of the major challenges in practice is the estimation of the plant gradients from noisy measurement data, in particular for several optimization variables. In this paper we propose a new real-time optimization scheme that explores the inherent smoothness of the plant mapping to enable a reliable optimization. The idea here is to combine the quadratic approximation approach used in derivative-free optimization techniques with the iterative gradient-modification optimization scheme. The convergence of the scheme is analyzed. Simulation studies for the optimization of a ten-variable synthetic example and a reactor benchmark problem with considerable plant-model mismatch show its promising performance.     

The influence of simulation time-resolution on the matching between on-site micro-wind generation and building electric demand

This paper is to investigate the unique impact of simulation time-resolutions on energy matching between on-site micro-wind turbine and household electric demand. The focused indices are on-site electrical energy fraction (OEFe), on-site electrical energy matching (OEMe), and their errors (e_OEF and e_OEM). The methodology consists of parametric analyses with respect to time-resolution levels, averaging methods, demand profiles, turbine capacities, and wind conditions. Two averaging methods are used: ‘Speed Averaging’ and ‘Power Averaging’. With a coarser resolution, two averaging effects have been found. One is an overestimation effect by both the averaging methods, which are more likely to be encountered especially when a high-resolution generation curve frequently crosses intermittent long spikes of a demand curve. The other effect is an underestimation effect on OEFe simultaneously occurring with the Speed Averaging Method under the conditions of (1) a low wind speed and (2) a high unstable wind speed and a low turbine capacity.     

Fabrication and electromagnetic wave absorption property of quartz ceramics with a gradient distribution of BaTiO3

Quartz ceramics with a uniform/gradient distribution of BaTiO₃ (U/G–SO–BTO) are fabricated by cold pressing a powder blend with BTO followed by sintering and using a combined technique of spreading the powder blends with gradually increased BTO layer–by–layer and sintering. The electromagnetic wave absorption properties of these two ceramics are studied in detail. For U–SO–BTO samples, the primary electromagnetic reflection is strong due to the aggravated impedance mismatch at their surfaces. The electromagnetic wave reflectivity of U–SO–BTO could only reach ?7.0?dB when the sample thickness is 6?mm and the BTO content is 8.0?wt%, and it decreases slightly to ?8.1?dB when the sample thickness is increased to 10.0?mm and the BTO content is decreased to 5.0?wt% simultaneously. For G–SO–BTO samples, electromagnetic waves could enter with little reflection due to the weak surface impedance mismatch, and the electromagnetic waves entering these samples could propagate forward while being absorbed gradually with little reflection because of the weak impedance mismatch at the interfaces. The G–SO–BTO samples are promising excellent electromagnetic absorbing materials because their electromagnetic wave reflectivity could reach a level lower than ?12.0?dB and could decrease further from –12.2 to ?13.1?dB as the layer thickness increases from 1.0 to 2.0?mm.     

半导体封装模具模腔偏错位原因分析

介绍了半导体封装模具偏错位种类,分析了偏错位缺陷产生的原因,并针对偏错位总结了几种相应的纠正措施、改善解决方案,指出应从模具设计、材料选择、模具温度设置调整、定位零件设计、总检与控制等各方面系统优化解决。     

Effects of carrier phase estimation on front-end IQ mismatch compensation in mode division multiplexed MIMO coherent receiver

The effects of carrier phase estimation on IQ mismatch compensation are investigated and compared for coherent MIMO optical receiver. We investigate the impacts of phase IQ mismatch on required optical signal-to-noise ratio (OSNR) for coherent MIMO detection. The impacts of number of modes and analog-to-digital converter (ADC) resolution are also evaluated. The results show that decision-directed carrier phase estimator could compensate significant amount of IQ mismatch without employing additional compensation technique, and relaxes requirement of ADC resolution.     

Model-based temperature control of a diesel oxidation catalyst

The problem studied in this article is the control of a DOC (diesel oxidation catalyst) as used in aftertreatment systems of diesel vehicles. This system is inherently a distributed parameter system due to its elongated geometry where a gas stream is in contact with a spatially distributed catalyst. A first contribution is a model for the DOC system. It is obtained by successive simplifications justified either experimentally (from observations, estimates of orders of magnitude) or by an analysis of governing equations (through asymptotic developments and changes of variables). This model can reproduce the complex temperature response of DOC output to changes in input variables. In particular, the effects of gas velocity variations, inlet temperature and inlet hydrocarbons are well represented. A second contribution is a combination of algorithms (feedback, feedforward, and synchronization) designed to control the thermal phenomena in the DOC. Both contributions have been tested and validated experimentally. In conclusion, the outcomes are evaluated: using the approach presented in this article, it is possible to control, in conditions representative of vehicle driving conditions, the outlet temperature of the DOC within ±15 °C.     

Model assessment of MPCs with control ranges: An industrial application in a delayed coking unit

Poor model quality is one of the most frequent causes of performance deterioration in Model Predictive Controllers. As such, frequent model evaluation and correction is fundamental. Some assessment methods are reported in the literature, but most cannot deal with Model Predictive Controllers (MPCs) without fixed setpoints for controlled variables. Botelho et al. (2015, 2016a, 2016b) proposed a series of methods that include the controller tuning and the applied MPC implementation in the assessment procedure. Their main advantage is setpoint independence. This paper analyzes the application of these methods in an industrial MPC with control ranges. The system studied is an MPC of a fractionating column in a delayed coker unit of a refinery in Brazil. The results demonstrate that the method is capable of correctly quantifying the effect of modeling problems and identifying whether they are related to a model-plant mismatch or unmeasured disturbance.     

Plastic limit load and its application to the fracture toughness testing for heterogeneous single edge notch tension specimens

The current investigation pursues the confirmation of the applicability of the limit load solutions in determination of the η factors necessary for fracture toughness testing protocols. The procedure begins with the correct calculation of limit load values in welded single edge notch tension (SE(T)) fracture specimens containing centreline cracks. Hence, the η factor is inferred through the principle of potential energy. Additionally, such results are compared with those obtained from finite element analyses, including strain hardening effects available in the literature. SE(T) specimens subject to pin‐loading display that the η factors are insensitive to the configurational effects and hardening properties. On the other hand, in clamped SE(T) specimens, such effects become meaningful, making its usage in fracture toughness experiments questionable. This work provides an alternative methodology to compute fully plastic proportionality coefficients (η) based on limit load solutions for heterogeneous cracked SE(T) specimens. These analyses also consider the limitations and potentialities of such an approach in experimental measurements of ductile crack growth.     

Experience with the use of the acoustic emission technique for monitoring scale failure in wet and dry environments

Abstract

A brief survey of the acoustic emission technique for monitoring scale cracking and failure on 2.25–24% Cr steels in wet and dry environments is given. A number of acoustic emission test rigs are described. Some of the more simple test rigs are used for testing small oxidation coupons during isothermal oxidation. More sophisticated rigs have been used for testing full size heat exchanger tubes during thermal cycling.

Most acoustic emission measurements in a wet environment come from testing at temperatures below 650°C. There are examples from Alloy 800 and thermal barrier coatings that were tested at higher temperatures, 900°C and 1100°C, respectively. Through the years acoustic emission tests have been performed in dry air, dry air+10%H₂O, dry air+0.5%SO₂, and Ar+5%H₂+50%H₂O. Consequently, a wide variety of exposure temperatures and atmospheres can be investigated using acoustic emission techniques.

Qualitative acoustic emission results can detect when scale cracking occurs at exposure temperature, where such cracks are produced by growth stress. Acoustic emission signals have been measured during sample cooling, where the signal arises from scale cracking that is caused by the thermal expansion mismatch stress. Measured results have clearly shown that scale cracking caused by both growth stress and thermal expansion mismatch stress are affected by water vapor in the exposure environment. Post-test metallographic investigations show that crack orientation and the oxide scale phases are also affected by the gas composition in the test rig. Additionally the sample mass gain and scale thickness is affected by water vapor content.

Finally, acoustic emission techniques are helpful for understanding the phenomena of breakaway oxidation and spallation/exfoliation.