环氧-聚酰胺体系中增韧剂的研究

在环氧-聚酰胺体系中分别加入“海岛结构”QS-1、聚硫橡胶、液体丁腈橡胶增韧改性,通过对固化物剪切强度、弯曲弹性模量及断裂强度的对比,“海岛结构”QS-1增韧综合性能较好.     

多孔塑料管材挤出工艺和机头模具

扼要介绍了多孔塑料管材的用途、性能、制造方法、配方、生产工艺和机头模具的设计     

Measurement of Adhesive Bond Properties Including Damage by Dynamic Mechanical Thermal Analysis of a Beam Specimen

A method to obtain mechanical properties using a bonded (double) cantilever beam (or three point bend) specimen loaded in a manner to produce pure shear in the adhesive layer is reviewed. A revised mathematical solution which allows for easier interpretation of optimum beam dimensions to the one originally developed by Moussiaux, Cardon and Brinson for the static case is presented. An extension of this solution for a fixed/fixed viscoelastic beam under steady state oscillations developed by Li, Dickie and Morman is also discussed. Previous results using a vibrating beam to determine the complex viscoelastic properties of a bonded beam are reviewed. These results demonstrate conclusively that dynamic mechanical thermal analysis (DMTA) measurements discriminate differences in surface treatments and various environmental conditions. New measurements are presented that indicate the DMTA procedure can be used to quantify damage simulated by imbedded flaws in beams. The procedure is also shown to assess the effects of both humidity and corrosive environments on lap specimens. It is suggested that this technique may ultimately provide a method to quantify the amount of hidden damage in an adhesive joint subjected to fatigue, moisture or corrosive environments.     

工艺参数对PP挤出发泡泡孔结构的影响

研究了螺杆转速、机头口模形状以及机头温度对挤出发泡聚丙烯(PP)泡孔结构的影响。结果表明：在挤出发泡过程中，一定配方、机头形状和温度下，螺杆转速存在最佳值；机头形状越有利于建立高压，制得的泡沫的泡孔越细密均匀且发泡倍率越高；机头口模温度在保证顺利挤出情况下．越低越有利于制得高发泡倍率的泡沫。     

High PVC film‐forming composite latex particles via miniemulsification,part 1: Preparation

Miniemulsification technology was used to encapsulate TiO₂ particles inside a styrene/n‐butyl acrylate copolymer with high loading levels (11 to 70% PVC (pigment volume concentration)). In this approach, a St/BA copolymer dissolved in toluene in the presence of a costabilizer (hexadecane) was mixed with a dispersion of TiO₂ particles in toluene and sonified, and then emulsified in an aqueous surfactant solution by sonification. The effect of sonification time on both the dispersibility of the TiO₂ particles in the presence of the copolymer and hexadecane and on the encapsulated particle size was investigated. Particle size analysis by dynamic light scattering showed that these composite latexes are quite stable. It was also found that as the TiO₂ loading increased from 11 to 43% PVC, the particle size of the TiO₂ dispersion decreased while the polymer‐encapsulated TiO₂ particle size increased. The effect of surfactant concentration (sodium lauryl sulfate, SLS) on the encapsulated particle size was investigated using four different SLS concentrations in the 11% PVC system. The results showed that as the SLS concentration increased the particle size decreased, as expected. Also it was found that the minimum surfactant concentration that gives stable encapsulated TiO₂ particles is above 10 mM SLS. The role of HD in the recipe was studied for an artificial latex containing no TiO₂ and one prepared at 11% PVC, in terms of particle size before and after solvent stripping, and its effect on the T_g. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4504–4516, 2006     

蔗渣浆低浓黑液多聚物粘度对温度依赖性的关联模型

利用聚合物自由体积理论模拟了蔗渣浆低浓黑液对粘度对温度的依赖性的数学模型，最终得出黑液多聚物粘度与温度的相关式：η=A1exp[B1/(T-T0)]。利用示差扫描量热分析技术（DSC）得出了蔗渣黑液多聚物中连续相与分散相的转变曲线，并获得了表观温度T0的平均值为255K；通过实验数据拟合可回归出蔗渣黑液多聚物在不同浓度时的系数A1和B1值。因此，使用该粘度的数学模型可估算蔗渣低浓（接近40％固含量）黑液多聚物在操作温度范围内（20－100℃）的粘度值。     

采用高速剪切反应器生产超细氧化铋工艺探讨

利用硝酸铋溶液和碳酸铵溶液为原料，采用高速剪切反应器，500℃煅烧后可以生产出高纯、超细的氧化铋粉末。该方法制备出的氧化铋平均粒度0．71μm且粒度范围分布窄，颗粒形貌为类球形，晶相为纯α相，指标达到电子压敏陶瓷要求。由于粒度细小，可以在电子压敏陶瓷球磨工艺减少球磨工艺，并具有更好的分散效果。本文对超细的氧化铋粉末形成机理也进行了探讨。     

底吹钢包两相区两段模型

在考虑雷诺应力的基础上，建立了底吹钢包中气液两相区流体流动的两段模型。这一模型可用于计算近喷嘴处和浮羽流区各截面处两相流的平均速度、速度分布、流股直径和平均含气率等．数值计算表明：理论含气率与实验值符合很好．计算还表明：平均含气率和平均速度随高度的增大而减小，但流股直径随高度的增大而增大．另一方面，平均速度随初始供气量的增大而增大，而抽引比则随供气量增大而减小．通过两段模型可很好地描述喷嘴处气液流的行为．     

Tactile display with tangential and normal skin displacement for robot-assisted surgery

This paper proposes a tactile display providing both shear and normal feedback to the fingertip for generating three-axis tactile feedback during teleoperation of a surgical robot. The display is composed of five balloons actuated by controlling the pneumatic pressure. The implemented display is 18?mm?×?18?mm?×?15?mm. This size is suitable for mounting the display onto the master controls of a surgical robot. The maximum normal and shear displacements are 2 and 1.3?mm, respectively. The proposed tactile display may provide perceivable stimuli to a human finger pad in all five directions: normal, distal, proximal, radial, and ulnar. This paper also reports on the results of psychophysical measurement of the minimum perceivable movement of the developed tactile display for each of the five directions.     

Rheological properties of bitumen in water emulsions with added solids

Experimental work was carried out to investigate the rheological properties of bitumen in water emulsions containing solids of different shape and size. The bitumen volumetric concentration was varied up to 60%, solids free basis, and the solids volume fraction (total volume basis) was varied up to 0.2. Irregular-shaped silica sand (average diameter: 9 and 33 μm) and smooth spherical glass beads (average diameter: 27 and 44 μm) were used as the added solids. In the low shear stress range, shear thinning behavior was observed for bitumen in water emulsions. At high shear stress, the viscosity of the emulsions became fairly independent of the shear stress. The addition of solids to the bitumen emulsions increased the mixture viscosity. The addition of irregular-shaped silica sand gave a higher viscosity than a similar addition of the spherical glass beads. The viscosity of the emulsion/solids mixtures was influenced by the solids size as well; the smaller size particles gave a higher viscosity. The addition of solids to the bitumen emulsions also induced shear thickening (dilatancy) behavior at high solids volume fraction. The degree of the shear thickening increased with the oil concentration.