Near Wall Studies of Pulp Suspension Flow Using LDA

A detailed study of the flow behaviour in the near wall region of pulp suspensions up to 4.7% have been performed using Laser Doppler Anemometry (LDA) in pipe flow. Axial mean velocity profiles show a distinct plug flow and an increase of the plug region as the flow rate decreases and fibre concentration increases. An attempt is made to relate the LDA data‐rate to fibre concentration, which indicates a dilution region at 1‐2 mm from the wall that is larger than the annulus region. The dilution region increases with increasing flow rate, decreasing concentration and when using longer pulp fibres.     

Effect of water on HDS of DBT over a dispersed Mo catalyst using in situ generated hydrogen

A novel process was developed for the bitumen emulsion upgrading, wherein emulsion breaking and upgrading occurred in the same reactor using H₂ generated in situ from the water in the emulsion via the water gas shift reaction (WGSR). In this study, dibenzothiophene (DBT) was chosen as a model compound to investigate the effect of water and in situ H₂ on hydrodesulfurization (HDS). All the experiments were performed in a 1-L autoclave reactor at temperatures between 300 and 380 °C using in situ H₂ and ex situ H₂ (externally supplied H₂) over a dispersed Mo catalyst formed from phosphomolybdic acid (PMA). At very low water content, water was found to promote the HDS reaction in the ex situ H₂ run probably because it facilitates the formation of more active dispersed MoS_x species. At higher water content, however, water inhibits every individual reaction in the reaction network in the HDS of DBT, blocking the hydrogenation pathway more than the hydrogenolysis pathway. The relative reactivity of the in situ and ex situ H₂ depends on the water content present in the reaction system. At an optimized mole ratio of H₂O:CO (1.35), higher HDS activity was observed in the in situ H₂ run compared to ex situ H₂ run, and particularly, the hydrogenation pathway was promoted in the in situ H₂ run.     

一种新的BOC(n,n)型信号的精确捕获算法

针对BOC(n,n)型信号自相关函数存在三个峰值导致伪码捕获模糊性的问题,提出了一种新的基于相关函数的精确无模糊的捕获算法。该算法将信号进行频域的多普勒补偿,通过本地增设QBOC(n,n)支路,利用BOC(n,n)信号自相关以及BOC(n,n)和QBOC(n,n)互相关,经移位±TC/4、取模、求和、平方运算而实现。理论与仿真分析表明,该算法在不改变自相关主峰宽度的情况下完全消除相关副峰的同时,显著提高了主峰峰值;比传统捕获算法的性能好4.5 dB左右,并且捕获精度良好、易于实现。     

一种新型零电压零电流开关移相全桥变换器

为了解决传统零电压零电流开关（ZVZCS）PWMDC/DC变换器滞后桥臂零压范围较小、环流损耗大的问题,采用串联双变压器、滞后桥臂带辅助网络和倍压整流电路,提出了一种新型零电压零电流移相全桥变换器.首先分析了变换器在稳态下的各种工作状态,给出了相关计算公式,并制作了一台实验样机进行原理验证.实验结果表明：该变换器能够在较宽的负载范围内实现滞后桥臂的零电压开通,重载下实现零电流开通,从而极大地降低高频电路初级开关损耗和次级电磁干扰.     

多普勒声纳系统原理及应用

多普勒声纳已成功应用于多种水下载体的导航。首先分析了水下导航的特点,推导了四波束配置多普勒声纳速度矢量的最小二乘估计,给出了误差速度的计算方法和物理意义,最后介绍了多普勒声纳在水下导航中的应用。     

K~-原子能级移动与能级宽度的计算

通过对K-原子的理论分析,利用DD光学模型势,数值求解相应的Klein-Gordon方程,得到了从K6-Li到K5？6 Ni中N=Z的K？原子的能级移动和能级宽度,理论计算结果与实验数据基本一致,其结果表明了DD光学模型势在K-原子中应用的正确性.     

直接甲酸燃料电池阳极催化剂的研究进展

介绍了直接甲酸燃料电池（DFAFC）阳极电催化机理,以及Pt基、Pd基附载型和非附载型阳极催化剂的发展状况,分析了金属合金d-带能级移动和金属表面偏析对直接甲酸燃料电池催化活性的影响,对筛选阳极催化剂合金材料具有一定的指导作用.     

M序列的对称性变换及对称群

n级M序列是由n级非线性回馈移位寄存器产生的周期为2n的二元序列,也称为de Bruijn序列。该文将讨论M序列的对称性变换,提出了一类新的对称性变换——"与/或"逻辑对称性变换,并研究了基于对称性变换的对称群。