Electron microscopic observations and DNA chain fragmentation studies on apoptosis in bone tumor cells induced by ~(153)Sm-EDTMP

ＥｌｅｃｔｒｏｎｍｉｃｒｏｓｃｏｐｉｃｏｂｓｅｒｖａｔｉｏｎｓａｎｄＤＮＡｃｈａｉｎｆｒａｇｍｅｎｔａｔｉｏｎｓｔｕｄｉｅｓｏｎａｐｏｐｔｏｓｉｓｉｎｂｏｎｅｔｕｍｏｒｃｅｌｓｉｎｄｕｃｅｄｂｙ１５３ＳｍＥＤＴＭＰＺｈｕＳｈｏｕＰｅｎｇ，Ｘｉａ...     

电子和β射线两用外推电离室的研制

本文研制了一台测量电子束和β射线吸收剂量的外推电离室,其空腔室壁材料可拆换并分别与空气、组织和硅等效,收集电极名义直径为1.5、3、10和30mm,空气空腔可变范围为0.2～15mm。该外推电离室具有在空腔内部测温,自动改变窗口上方材料厚度及采用微型计算机控制等特点。适用于测10 MeV能量以下,剂量率为10~5～10~(-3)Gy/h的电子或β射线吸收剂量。整个外推电离室自动测剂量系统在测~(204)TLβ放射源表面剂量率的不确定度为2.3％。测1.5 MeV电子束在硅和哈密瓜深部剂量率时,不确定度分别为4.0％和2.8％。     

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Electron field emission characteristics of individual multi-walled carbon nanotubes (MWCNTs) were investigated in situ inside the transmission electron microscope (TEM). For a single MWCNT it was found that while field-emission can hardly occur from the side of the nanotube, a curved nanotube may result in finite side emission and the best emission geometry is the top emission geometry. Current-voltage (I-V) measurements made at different vacuum conditions and voltage sweeps emphasize the importance of the adsorbates on the electron field emission of MWCNTs. For a contaminated MWCNT, although the field emission current was reduced, the stability of its emission was improved. A current of up to several tens of μA was observed for a single MWCNT, but it was found that long time emission usually results in drastic structure damage that may lead to sudden emission failure.     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。     

Bulk and Interphase Effects in Aged Structural Joints

Although structural adhesives are becoming widespread in numerous applications, one important limitation at present is the long term behaviour of bonded assemblies under conditions of high humidity, especially at elevated temperatures. This study presents a comparison between bulk properties of a structural epoxy resin and its behaviour in a torsional joint consisting of a hollowed-out cylinder bonded to a plate—both substrates being in stainless steel. Exposure to ca. 100% relative humidity at 70°C leads to modification of the bulk properties of the polymer, notably reduction of its elastic modulus. Although this may explain some differences in behaviour of the torsional joint, premature failure is attributed to weaknesses in the interphase zone.

Auger Electron Spectroscopy (AES) has been employed to investigate both unbonded steel surfaces and fracture zones. Although prolonged exposure to water leads to a more extensive degree of (apparently) adhesive failure at the interface polymer/metal, AES has shown the presence of non-negligible quantities of carbon, attributed to residual polymer. Failure would seem to occur, at least partly, in a weak interphase of the polymer, near, but not at, the interface.

Various possible causes are evoked. For dry failure, residual polymer may be due to the topography of the metal surface and/or local modification of the adhesive during cure. In the case of aged joints, in addition there are potential effects due to swelling and differential stresses, secondary bond failure and molecular chain scission within the polymer, all provoked by the presence of water.     

锰红柱石中Mn~（3＋）谱的分析

本文利用锰红柱石的吸收光谱,考虑到锰红柱石中Ｍｎ３＋处于一种Ｃ２ｖ（Ｃ２＇＇）的低对称晶位,采用一简化的强场方案,把单电子晶场矩阵元用自旋允许吸收带代替,克服了多参数的困难．计算出了锰红柱石中处于八面体配位的Ｍｎ３＋的电子能谱,对锰红柱石的分析首次获得了较为理想的理论计算结果,并对Ｍｎ３＋和Ｆｅ３＋谱带的识别提出了新的看法．     

An electron tomography algorithm for reconstructing 3D morphology using surface tangents of projected scattering interfaces

Upon discerning the mere shape of an imaged object, as portrayed by projected perimeters, the full three-dimensional scattering density may not be of particular interest. In this situation considerable simplifications to the reconstruction problem are possible, allowing calculations based upon geometric principles. Here we describe and provide an algorithm which reconstructs the three-dimensional morphology of specimens from tilt series of images for application to electron tomography. Our algorithm uses a differential approach to infer the intersection of projected tangent lines with surfaces which define boundaries between regions of different scattering densities within and around the perimeters of specimens. Details of the algorithm implementation are given and explained using reconstruction calculations from simulations, which are built into the code. An experimental application of the algorithm to a nano-sized Aluminium tip is also presented to demonstrate practical analysis for a real specimen.

Program summary

Program title: STOMO version 1.0Catalogue identifier: AEFS_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFS_v1_0.htmlProgram obtainable from: CPC Program Library, Queen's University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 2988No. of bytes in distributed program, including test data, etc.: 191 605Distribution format: tar.gzProgramming language: C/C++Computer: PCOperating system: Windows XPRAM: Depends upon the size of experimental data as input, ranging from 200 Mb to 1.5 GbSupplementary material: Sample output files, for the test run provided, are available.Classification: 7.4, 14External routines: Dev-C++ (http://www.bloodshed.net/devcpp.html)Nature of problem: Electron tomography of specimens for which conventional back projection may fail and/or data for which there is a limited angular range. The algorithm does not solve the tomographic back-projection problem but rather reconstructs the local 3D morphology of surfaces defined by varied scattering densities.Solution method: Reconstruction using differential geometry applied to image analysis computations.Restrictions: The code has only been tested with square images and has been developed for only single-axis tilting.Running time: For high quality reconstruction, 5-15 min     

Corrosion-resistant analogue of Hadfield steel

The concept of alloying austenitic steels with carbon + nitrogen is used for the development of a corrosion-resistant austenitic CrMn steel having an impact wear resistance close to that of the Hadfield steel. A higher stabilization of the austenitic phase by C + N, as compared to carbon or nitrogen alone, is substantiated by ab initio calculation of the electron structure, measurements of the concentration of free electrons and calculations of the phase equilibrium. Based on these results, the compositions (mass%) Cr18Mn18C0.34N0.61 and Cr18Mn18C0.49N0.58 were melted and tested along with Hadfield steel Mn12C1.2. Mechanical tests have shown that, as compared to the Hadfield steel, the experimental steels possess a higher strength, plasticity, hardness and the same resistance to impact wear. TEM studies of the surface layer after impact treatment revealed a mixture of the amorphous phase, nanocrystals and fine-twinned austenite. At the same time, using Mössbauer spectroscopy of conversion electrons, the ferromagnetic ordering was found in the surface layer of up to 10 μm in depth, which is the sign of the strain-induced martensitic phase. The hypothesis of a transition from the low-spin to the high-spin state of the iron atoms within the thin twins in austenite was proposed in order to interpret the discrepancy between TEM and Mössbauer studies. Potentiodynamic measurements and immersion tests show that the CrMnCN steels possess a significantly higher pitting potential and resistance to general corrosion in comparison with Hadfield steel.     

Electron beam evaporated carbon nanotube dispersed SnO2 thin film gas sensor

Carbon nanotube (CNT) is a useful material for gas-sensing applications because of its high surface to volume ratio structure. In this work, multi-wall CNTs are incorporated into tin oxide thin film by means of powder mixing and electron beam evaporation and the enhancement of gas-sensing properties is presented. The CNTs were combined with SnO₂powder with varying concentration in the range of 0.25–5% by weight and electron beam evaporated onto glass substrates. From AFM and TEM characterization, CNT inclusion in SnO₂thin film results in the production of circular cone protrusions of CNT clusters or single tube coated with SnO₂layer. Experimental results indicate that the sensitivity to ethanol of SnO₂thin film increases by the factors of 3 to 7, and the response time and recovery time were reduced by the factors of 2 or more with CNT inclusion. However, if the CNT concentration is too high, the sensitivity is decreased. Moreover, the CNT doped film can operate with good sensitivity and stability at a relatively low temperature of 250–300^∘C. The improved gas-sensing properties should be attributed to the increasing of surface adsorption area of metal oxide produced by CNT protrusion.     

Confined acoustic phonons in ultrathin SOI layers

We try to reproduce experimental mobility curves in ultrathin silicon-on-insulator inversion layers using a Monte Carlo simulator and a bulk model for the electron scattering with acoustic phonons. While it is possible to reproduce the experimental behavior for the thicker samples, the electron mobility is strongly overestimated when the thinnest samples are considered. The mobility curves for the thinnest samples can be reproduced using the same model if the deformation potential parameter increases as the silicon thickness decreases. This fact shows that acoustic phonons are also confined in ultrathin silicon on insulator layers. We then study confined phonons in single and three layer structures in order to give a physical motivation to the increase of acoustic phonon scattering rate for in ultrathin silicon layers.