中子产额大于1.5×10^10n／s的密封中子管

报道了一种中子产额大于１．５×１０１０ｎ／ｓ、靶和离子源都可拆卸的密封中子管，以它为核心研制的密封中子发生器已被用于中子照像等领域，并取得了较好的结果。     

Thermal design method of bayonet-tube evaporators and condensers

The paper describes an effectiveness-NTU design method of bayonet-tube evaporators and condensers. Including the effect of the wall superheat on the shell-side film coefficient, and using an energy balance on the tube, differential equations for the steady-state fluid temperatures are formulated. Because of the nonlinear nature of the governing equations, the fourth-order Runge-Kutta method is employed to the solution of the finite difference equations. The results are iterated with the combination of integration techniques. An upper bound to the numerical error being ±5% the fluid temperature distribution as well as the exchanger effectiveness are determined, and presented as a function of the Hurd number, the number of heat transfer units and the flow arrangement. For flow entering through the inner tube, the temperature distribution displays the occurrence of a minimum at a point other than the tube-tip of the exchanger. In an extension of the analysis, an effort is made to illustrate the deviation of the results obtained by uniform film coefficient from the present study, and the differences are outlined.     

Al—Si—Mn—Fe合金中相组成的电子衍射鉴定

本文利用选区电子衍射,并结合X射线衍射对六种不同成份的急冷合金及其退火后的相组成进行了鉴定,得到了它们的相组成。     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

混凝土浇筑质量对钢管混凝土性能的影响

着重阐述钢管与其核心砼粘结强度对钢管砼承载影响问题 ,并介绍三种常用浇筑方式和检测方法。     

碳纳米管及其批量制备研究进展

从碳纳米管的优异性能和应用出发,综述了碳纳米管的制备方法以及我国目前在碳纳米管研究中面临的问题;分析了碳纳米管产业化对的我国纳米技术产业化发展的积极意义,特别介绍了清华-南风纳米粉体产业化工程中心开发的、具有我国自主知识产权的纳米聚团流态化技术。     

Visible Light Excitation Characteristics of Novel Infrared Up-conversion Materials

The Fluorescence excitation spectrum, emission spectrum and infrared up-conversion luminescence excitation spectrum are measured. The results of spectrum measurement show that the electron trapping materials CaS: Eu, Sm are of visible light excitation. The mechanism of visible light excitation is analyzed.     

Effect of dose rate and length of storage on the ESR signal strength in irradiated chicken bone

One hundred and twenty-five pairs of chicken drumsticks were randomly allocated to one of five dose rates: 5, 10, 15, 20 or 600 kGyh-. The highest dose rate was obtained using a linear accelerator whilst the remaining dose rates were provided using a ⁶⁰Co gamma source. Each batch of 25 pairs was further divided into groups five of which were stored at 4°C for 0, 7, 14, 21 or 28 days. ESR spectroscopy was used to measure the intensity of the radiation-induced signal. There was a quadratic relationship between ESR signal strength and dose rate, which although statistically significant is unlikely to be of practical importance. The magnitude of the ESR signal declined by about 20% over the first 14 days of storage at 4°C and thereafter the decrease was minimal.     

排气结构对导叶式旋风管分离性能的影响

通过对比实验测定了不同排气结构下导叶式旋风管的分离效率及压降,同时用智能型五孔球探针测试仪测定了不同排气结构的旋风管内流场分布,结合性能实验与流场测量的结果,研究了排气芯管内径及其结构型式对分离性能的影响,为旋风管结构优化和开发及其分离机理的研究提供了一定的实验基础。