改性玻纤增强尼龙610,1010塑料

研究了采用(准)中粘度级尼龙做基体树脂,加入成核剂改善尼龙的结晶过程,提高结晶速率和初始熔融温度;添加光、热氧稳定剂,防止尼龙在成型加工和使用过程中产生降解与老化,提高塑料制品的质量和减少性能的分散性;采用合理的工艺条件,确保添加剂的均匀分散与减少玻纤的磨损,得到适于军工、航空和机电等领域需要的高性能的受力结构工程塑料。     

非线性编辑中特效图文素材的应用

Cool 3D是一款特效图文制作软件，适用于动画片段、3D文字、图形等制作场合。Cool 3D中制作的特效素材应用于非线性编辑中，可以丰富素材的表现形式，提高节目编辑制作的整体质量。     

Comparison of six methylation methods for analysis of the fatty acid composition of albacore lipid

Six methods widely used to produce methyl esters for the gas chromatographic determination of the fatty acid composition of a marine lipid were compared. Four acid-catalyzed methods (1% H₂SO₄: CH₃OH; 5% HCl: CH₃OH; 7% and 14% BF₃: CH₃OH) and two base-catalyzed methods [0.5M NaOCH₃: CH₃OH; (1:4) tetramethylguanidine: CH₃OH] were used.
The use of BF₃: CH₃OH (7% and 14%) gave a lower content of 18:1 n9 than the other methods and produced an artefact (2.7–3.2% of total fatty acid content) eluting between the 20:5 and 24:1 fatty acid methyl esters. No significant differences were obtained between the other four methods.
Accordingly the use of BF₃: CH₃OH for transmethylation of marine lipids is not recommended. Results obtained in the other four methods showed that all are comparable.     

Thermally stimulated discharge current studies in pure and fe-doped polystyrene films

Studies were made on the thermally stimulated discharge currents (TSDCs) in pure (undoped) and Fe-doped polystyrene films as a function of polarizing field, polarizing temperature and dopant concentration. While undoped films exhibited a single peak, doped films showed two peaks one at low temperatures and another at high temperatures. The low temperature peak, which exhibits a shift towards lower temperatures with increasing dopant concentration, is attributed to the relaxation of the main chain, while the high temperature peak, which shows a tendency to shift towards higher temperatures with dopant concentration, is due to space charge polarization. The TSDCs were higher for low dopant concentrations than their undoped counterparts, while for high concentrations of the dopant, the TSDCs decreased. Formation of charge transfer complexes at low dopant concentrations and molecular aggregates at higher dopant concentrations are suggested as the possible reasons for this behaviour.     

Purification and renaturation of recombinant human lymphotoxin (tumour necrosis factor beta) expressed in Escherichia coli as inclusion bodies

High level expression of recombinant human tumour necrosis factor β (rh TNF-β) in Escherichia coli results in the formation of two portions of protein, namely soluble active protein and insoluble protein which is inactive and aggregates in the form of inclusion bodies (IBs). In this study, a procedure for purification and renaturation of rh TNF-β from inclusion bodies has been designed and verified experimentally with a product purity of more than 90% and a recovery of about 30%. The procedure includes washing of IBs with specific wash buffer (Triton X-100/EDTA/lysozyme/PMSF), their solubilization with 8 mol dm^?3 alkaline urea, purification with ion-exchange columns, refolding with renaturation buffer and finally concentration and desalination with an ultrafiltration membrane. The characteristics of the renatured protein were identical with those of purified protein from the soluble fraction as demonstrated by (1) SDS-PAGE, (2) cytotoxic activity on mouse L929 cells, (3) N-terminal amino acid sequence, and (4) gel filtration chromatography.     

The fracture stress of chemical vapour deposited diamond

The factors which control the fracture stress of chemical vapour deposited diamond have been studied using the 3-point bend geometry. Fracture stress values of 300–800 MPa for the growth side and 600–1200 MPa for the nucleation side were recorded for samples of thickness 0.4–2.4 mm. A Weibull modulus of 23 was calculated for the growth surface data, showing that the fracture stress variability was low for a brittle material. A theory based on these results demonstrates that the material behaviour is remarkably simple, depending only on the grain size and the sample thickness, regardless of wide variations in other parameters such as optical transmission and stress state. The paper also contains a possible explanation for this well-defined behaviour based on microstress variations resulting from differences in defect density in different growth sectors within a grain.     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.     

Superconductivity at differentTc in CdBa2Ca2Cu3Oy

A Cd analogue of the Tl and Hgn =3 series with nominal composition CdBa₂Ca₂Cu₃O_y has been synthesized. The samples were superconducting according to magnetic susceptibility measurements. The critical temperature was 103 or 107 K depending on the preparation conditions. The EDX analysis revealed the presence of Cd-1111, Cd-1121, and Cd-2333 as minor phases. The observed diamagnetic effects were attributed to the differentT _c of these phases.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.