Flakes of natural carbyne in a diamond mine

Flakes of natural carbyne were found in Liao-Ning diamond mine, China, and examined by HRTEM, XRD and EDX. Lattice fringes and clear SAD patterns were obtained. The interlayer spacings obtained with SAD were in good agreement with those determined on the powders found in Ries crater meteorite by X-ray diffraction. However, they are different in color and shape, the one found in China being black and flaky, but the one in Ries crater meteorite being silver-white and particulate. It was assumed that carbyne might be stabilized by the intercalation of either Si or Fe in nature.     

Internal deterioration of concrete by the oxidation of pyrrhotitic aggregates

This paper presents research results on the causes of a severe concrete deterioration, which occurred in many building foundations approximately 2 years after construction. Concrete samples were investigated with X-ray diffraction (XRD) analysis, a scanning electron microscope (SEM) and a petrographic examination performed with a stereomicroscope. It was found that the early cracking of concrete stemmed from the oxidation of the pyrrhotite found in the anorthosite aggregates used to produce the concrete. The oxidation process led to the precipitation of iron hydroxides having a higher volume than the original pyrrhotite does. The presence of micas (biotite) close to the pyrrhotite seemed to promote and accelerate the oxidation process.     

Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(0 0 2) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d_0 0 2 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc_0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d_0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.     

Synthesis mechanism of titanium carbide nano-fiber during self-propagating high temperature synthesis

Titanium carbide nano-fiber was synthesized by self-propagating high temperature synthesis (SHS) method. The final products after the SHS reaction were titanium carbide containing excess carbon and metallic titanium, which were removed by additional leaching process. TEM observation revealed that the average diameter is about 20 nm. Neutron diffraction analysis was carried out to study non-stoichiometric number of the titanium carbide. The non-stoichiometric numbers of the titanium carbide were 0.89–0.94. The Rietveld refinement of each patterns converged to good agreement (÷2=0.49–1.34). The formation mechanism of the carbide is related to a liquid-solid reaction including the preferential diffusion process of carbon atom into liquid titanium. This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

Effects of electrical discharge surface modification of superalloy Haynes 230 with aluminum and molybdenum on oxidation behavior

The effects of the electrical discharge alloying (EDA) process on improving the high temperature oxidation resistance of the Ni-based superalloy Haynes 230 have been investigated. The 85 at.% Al and 15 at.% Mo composite electrode provided the surface alloying materials. An Al-rich layer is produced on the surface of the EDA specimen alloyed with positive electrode polarity, whereas, many discontinuous piled layers are attached to the surface of the EDA superalloy when negative electrode polarity is selected. The oxidation resistance of the specimen alloyed with positive electrode polarity is better than that of the unalloyed superalloy, and the effective temperature of oxidation resistance of the alloyed layer can be achieved to 1100 °C. Conversely, the oxidation resistance of the other EDA specimen alloyed with negative electrode polarity is even worse than that of the unalloyed superalloy.     

Strategies for processing diffraction data from randomly oriented particles

The high intensity of free-electron X-ray light sources may enable structure determinations of viruses or even individual proteins without the encumbrance of first forming crystals. This note compares two schemes of non-crystalline diffraction data collection that have been proposed: serial single-shot data from individual particles, and averaged cross-correlation data from particle ensembles. The information content of these schemes is easily compared and we show that the single-shot approach, although experimentally more challenging, is always superior in this respect. In fact, for 3D structure determination a constraint counting argument shows that the cross-correlation scheme suffers from data deficiency.     

Liquid crystal oligo(cyclosiloxanes)

The synthesis and properties of individual liquid crystal oligo(cyclosiloxanes),, wherex=4–8 andR is a 4-methoxyphenyl-4-alkyloxybenzoate type of mesogenic group, is described. Preliminary results concerning the effect of ring size on the mesophase formation are included. X-ray diffraction studies have shown that the cyclosiloxanes form a smectic A₁ phase.     

Structural Studies of DNA–Cationic Lipid Complexes Confined in Lithographically Patterned Microchannel Arrays

We have used lithographically patterned microchannel arrays with channel widths ranging from 1 to 20 m, fabricated using electron beam lithography and reactive ion etching, in structural studies of DNA–cationic lipid complexes in confinement. Various techniques have been developed for loading these DNA–membrane complexes into the microchannels or to form the complexes in situ by sequentially depositing DNA and lipid solutions into the microchannels. Optical microscopy studies indicate that such complex formation is strongly influenced by the periodic channel structure even at channel widths much larger than the persistent length of the DNA molecules. Preliminary x-ray diffraction experiments conducted at Stanford Synchrotron Radiation Laboratory (SSRL) yielded only a weak signal from the lipid bilayers in the complexes. The use of a microfocused x-ray beam produced by the newly developed Bragg–Fresnel optics at a third-generation synchrotron facility may dramatically increase the signal-to-noise ratio and allow observation of orientational as well as positional ordering of DNA molecules induced by the microchannels. Structural control of the DNA–membrane complexes has a broad range of potential applications in gene probe technology and as mesoscopic biomolecular composites.     

对微波布拉格衍射实验中产生衍射极大值晶面的讨论

通过理论推导出三厘米微波布拉格衍射实验中的模拟晶体只能产生一、二级衍射,而且只有十个晶面可以产生衍射极大值,并且采用微波分光仪可以进行测量。本文还对这些晶面的特点进行了分析讨论,得出只要通过三个有代表性的晶面（晶面族）作为该实验的研究对象,就能够全面研究微波布拉格衍射实验,以便于从事这方面教学与研究的有关专业人士参考。