硫对注入YSZ单晶的金属铂在退火过程中结晶的影响

秀卢瑟福背散射－沟道技术（ＲＢＳ－Ｃ）和Ｘ射线衍射技术（ＸＲＤ）研究了Ｐｔ和注入ＹＳＺ（Ｙ２Ｏ３稳定的ＺｒＯ２）后产生的损伤和退火过程中损伤的恢复及注入Ｐｔ的晶化，ＲＢＳ－Ｃ分析表明ＹＳＺ室温下的存在较强自退火效应，ＸＲＤ分析结果示出硫以铂的晶化产生很大影响。     

Comparison of interfaces in Ti composites reinforced with uncoated and TiB2/C-coated SiC fibres

Interfaces play an important role in determining the mechanical properties of composite materials. The interfaces established between a titanium-alloy matrix (Ti-6Al-4V) and uncoated and TiB₂/C-coated SiC fibres are analysed by scanning electron microscopy, transmission electron microscopy and X-ray techniques. Emphasis is placed upon the interfacial morphology and microstructure, identification of reaction products, and the stability of the coating layer. Complex multi-reaction layers are observed frequently in the interfacial zones. Previous, often contradictory, reports about the interlayers are reviewed. Experimental observation demonstrates that the type and distribution of interlayers vary in a given system, due to prolonged treatment of the samples at temperature. The formation and distribution of the interlayers are discussed further, with respect to these and previous findings. Methods of reducing interfacial reactivity are discussed.     

大气激光通信中的光斑特性模拟和验证

根据空-地大气激光通信信道的特性,基于惠更斯-菲涅耳原理,应用夫琅禾费圆孔衍射的算法,对光波强度和光斑图像在光束截面内的分布进行分析及计算,研究了传输距离、发射孔径、激光波长以及湍流结构常数等对光斑形状及光强分布的影响。利用对数正态分布建立了大气湍流信道模型,通过对不同传输距离条件下光斑上不同点的光强分布进行计算统计和仿真分析,实验和仿真结果表明：光斑的光强分布图样服从贝塞尔分布。因此,在相同的大气湍流条件下,选择较长波长激光和较大孔径的发射器,可以有效降低光强闪烁引起的衰减,从而提高大气激光的通信质量。     

Poly(oxyphosphazenes): A unifying look at structure and morphology

Variations in thermotropic behavior have been investigated for many crystalline polyphosphazenes. Experimental results obtained from DSC, solid-state MAS NMR, dilatometry, mechanical property (creep and dynamic) measurements, birefringence, X-ray (wide and small-angle), and electron diffraction have been made as a function of temperature in an attempt to elucidate the structure-morphology behavior in these polymers. Initially all polyphosphazenes described in this study crystallize from dilute or moderately concentrated solutions in the monoclinic form with relatively low crystallinity (50%). When heated, these specimens expand atT(1) and adopt a chain-extended 2D mesophase morphology in order to relieve congestion. Above this first-orderT(1) temperature a chain-extended –P=N– chain backbone morphology transforms into an isotropic phase at the melting temperatureT _m. When cooled, samples transform into the mesostate. However, crystallization from the mesophase belowT(1) takes place into a 3D orthorhombic state. These two modes of ordering/disordering are in accordance with (i) a hexatic chain packing [betweenT(1) andT _m] with variously mobile side groups that also exhibits smectic features when mesogenic side groups are present and (ii) a 3D orthorhombic structure of high crystallinity belowT(1). The initial monoclinic phase is accessible only via a solution crystallization route. Solid-state MAS NMR, crystallization kinetic measurements, and optical microscopy studies obtained from oriented and unoriented polymers have been especially germane in providing a unifying picture for mesophase formation and ordering in polyoxyphosphazenes. X-ray and electron diffraction evidence is complicated by critical overlapping peaks that are found under these same conditions. They demonstrate that (a) positional disorder exists along the chain direction and (b) the side chain above, as well as below, theT(1) transition is governed by the mobility, size, and type of side group in circumstances where phase transformations occur.     

低碳钢显微结构的EBSD表征

近年来,新开发的电子背散射衍射技术将多晶材料的显微组织、微区成分与结晶学数据分析联系起来,能对晶界类型、取向、位向差和结构及其分布进行观察、统计测定和定量分析,从而建立了晶界结构、取向和织构等与多晶材料性能的定量和半定量关系,成为现代材料研究的重要实验技术。笔者结合低碳钢生产中的一些实际问题,扼要介绍了电子背散射衍射技术中的晶体取向图在多晶材料显微结构表征中的应用。     

Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge

For a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge, the relationship between the corrosion rate of the bridge and the composition of the rust layers formed on the girders was first investigated. These corrosion rates were clearly classified by the protective ability index (PAI) of α/γ^∗ and (β + s)/γ^∗, where α, γ^∗, β and s are the mass ratio of crystalline α-FeOOH, the total of γ-FeOOH, β-FeOOH and the spinel-type iron oxide (mainly Fe₃O₄), β-FeOOH and spinel-type iron oxide, analyzed by XRD, respectively. The inequality of the former index α/γ^∗ > 1 expressed the protectiveness criterion of the rust layer, while that of the latter index, (β + s)/γ^∗< 0.5 or > 0.5, classified the corrosion rate of the non-protective rust layer. The PAI is useful for a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge and is an important item for the corrosion assessment of the bridge.     

On the synthesis and characterization of a new manganite type CMR material: La0.7Hg0.3MnO3

A new manganite type CMR material, La_0.7Hg_0.3MnO₃ has been successfully synthesized and has been found to exhibit magnetoresistance (≈9%) at low fields (≈1.5 kG). The synthesis has been carried out through a solid state reaction route consisting of the formation of La_0.7MnO₃ followed by diffusion of Hg leading to La_0.7Hg_0.3MnO₃. The as grown samples are polycrystalline and correspond to an orthorhombic unit cell with the lattice parameters; a=5.5183 Å, b=5.6383 Å and c=7.5368 Å. The typical grain size as revealed by scanning electron microscopy is in the range of 0.5–2 μm. The ρ–T behaviour shows a peak at T_IM=227 K. The ρ–T behaviour above this temperature corresponds to that of an insulator and below this to that of a metal. The ρ–T behaviour remains unaltered when a magnetic field (H_dc=1.5 kG) is applied. However, with this magnetic field a drop in the resistivity is observed up to 77 K. At room temperature the magnetoresistance ratio (MRR) is too small but it steadily increases as the temperature is decreased. Thus, MRRs at 227.13 and 77 K are 3.41 and 9.05%, respectively, in an applied field of H_dc=1.5 kG. At a given temperature the variation in MRR with field H_dc is rapid at lower field values (H_dc<1.2 kG) and scales linearly for higher field values (H_dc>1.2 kG). It may be mentioned that the present work on the synthesis and magnetoresistance behaviour of La_0.7Hg_0.3MnO₃, is the first of its type.     

Structure, hyperfine interactions and magnetization studies of mechanically alloyed Fe50Ge50 and Fe62Ge38

X-ray diffraction, Mössbauer spectroscopy and magnetization measurements were used to study the structure and some magnetic properties of Fe₅₀Ge₅₀ and Fe₆₂Ge₃₈ prepared by mechanical alloying from the elemental powders. In both cases in the early stages of milling the intermediate paramagnetic FeGe₂ phase was formed. The mechanical alloying process of Fe₅₀Ge₅₀ resulted in the formation of the paramagnetic FeGe (B20) phase with an average crystallite size of about 15 nm. In the case of the Fe₆₂Ge₃₈, the ferromagnetic Fe₅Ge₃ (β) phase with a Curie temperature of about 430 K was obtained. The average crystallite size was about 9 nm. The average hyperfine magnetic field of about 16 T allowed it to determine that more than four germanium atoms exist in the nearest environment of the ⁵⁷Fe isotopes in the Fe₅Ge₃ phase.     

铍材应力常数的X射线法测试

在X2001应力分析仪上采用悬臂梁加载法测试了可以用于铍的X射线应力测试的5个衍射晶面的应力常数。结果表明,铍的5个衍射晶面的应力常数差异较大，在进行X射线应力分析时．应采用相应衍射晶面的应力常数，才能获得准确的应力分析结果。由于X射线对铍有较大的穿透深度，必须考虑X射线穿透深度对应力常数标定的影响。     

Edge diffraction correction for 3D scattering center modeling based on the shooting and bouncing ray technique

In the traditional scattering center extraction method based on the shooting and bouncing ray(SBR) technique,only the physical optics contribution of the target is considered.However,the physical optics method is unable to describe the contribution of the actual edge diffraction.By comprehensively considering the specular reflection and edge diffraction contribution of the target,an edge diffraction correction method for 3D scattering center modeling based on the SBR technique is proposed.Using the SBR technique and combining the image domain ray tube integration and equivalent edge currents method,the edge diffraction correcting formula for the 3D inverse synthetic aperture radar image is derived.Simulation results show that the proposed method is able to effectively improve the modeling accuracy of the 3D scattering center.