Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

雷达电子战自适应捷变频对抗技术研究

介绍了雷达自适应变频抗干扰技术,分析了与之相对应的干扰技术,并对雷达自适应变频对抗效果度量问题进行了研究。     

户式中央空调的节能研究

对户式中央空调系统节能问题作了研究,从住宅建筑空调负荷的计算特点和方法、系统主机容量的确定、末端设备的选择到系统调节特性等诸多方面,综合考虑,并结合实际工程,阐述了影响户式中央空调能量消耗的各种主要因素和改进措施.     

机抖激光陀螺抖动机构的温度特性的研究

研究了机抖激光陀螺抖动偏频量与温度之间的关系。通过大量的重复性高低温实验,证明了抖动偏频量与温度的线性关系,并得到了拟合直线表达式。结果表明,抖动偏频量与温度具有较好的线性关系,而且具有较好的重复性。同时用抖动偏频量对陀螺的零漂进行补偿,提高了陀螺的精度。     

一种用于三电平逆变器的SVPWM调制方法研究

本文从二极管箝位型三电平逆变器的基本结构出发，分析其输出状态，推导出六角形空间电压矢量图。然后从一种改进的，可以减小开关损耗，避免高的dv／dt三电平空间矢量PWM调制策略出发，建立了基于Matlab的详细仿真方案，验证了方案的可行性。文章给出了扇区判断的算法流程图，脉冲生成模块的内部结构图，其中的扇区判断的算法和脉冲生成方法对于用DSP实现三电平SVPWM具有重要的参考价值。     

氢压缩机管道强烈振动的消除

本文针对一往复式氢气压缩机管道振动十分强烈的情况，分析了管系的结构自振频率、气柱固有频率和气流脉动，采取了改变管系结构频率和气柱固有频率的减振措施，经实践证明获得了较为理想的减振效果。     

超低频信号的记录与回放

介绍一种经济实用的用普通磁带记录与回放超低频信号的方法，该方法在地质，建筑工程和医疗等行业中有一定的实用价值。     

Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels

The Monkman-Grant (M-G) and its modified parameters were evaluated for type 316LN and modified 9Cr-Mo stainless steels prepared with minor element variations. Several sets of creep data for the two alloy systems were obtained by constant-load creep tests in 550-650°C temperature range. The M-G parameters,m, m’,C, andC’ were proposed and discussed for the two alloy systems. Them value of the M-G relation was 0.90 in type 316LN steel and 0.84 in modified 9Cr-Mo steel. Them’, value of the modified relation was 0.94 in type 316LN steel and 0.89 in 9Cr-Mo steel. Although creep fracture modes and creep properties between type 316LN and modified 9Cr-Mo steels showed a basic difference, the M-G and its modified relations demonstrated linearity quite well. Them’ of modified relation almost overlapped regardless of the creep testing conditions and chemical variations in the two alloy systems, and the parameterm’ was closer to unity than that of the M-G relation.     

双轴晶体主平面上倍频的相位匹配

从折射率椭球方程和折射率椭球面出发，讨论光束在双轴晶体中传播及偏振的特性、主平面倍频共线相位匹配（PM）问题，得到了双轴晶体主平面内激光所有可能PM倍频的8种偏振组合及其相应的PM角公式、有效非线性（NL）系数deff的一般表达式。结果表明：得到的公式简单，可大大简化PM参数计算及优化设计；折射率椭球面是单层曲面，比双层的折射率面简单；基于折射率椭球面寻找所有可能PM的类型、偏振组合的方法物理图像简明，易于理解，大大降低了双轴晶体PM问题分析的难度。     

大功率压缩机的变频与喘振控制研究

分析了喘振现象和其发生的原因,讨论了大功率压缩机设备变频节能和防喘振原理,研究了利用单片机为核心的补偿控制器,实现了对压缩机进行调速一旁路回流的控制摸式,并在应用中取得了良好收益。