IS—95CDMA系统的容量分析

容量的需求是推动ＣＤＭＡ数字蜂窝移动通信开发的主要动力。系统的容量受许多因素的影响，本文针对ＩＳ－９５ＣＤＭＡ系统在采用了功率控制、话音激活和扇区划分技术的情况下，对系统的容量进行了分析，同时也分析了功率控制精度对容量的影响。     

关于电视群信号对光纤副载波调频传输中的信噪比平衡问题的分析

本文对微波副载波用电视群信号调频的光纤传输中的信噪比平衡问题进行了分析,推导出VSB-AM信号在解调后的信噪比表达式,引入了信噪比恶化系数的概念.为了实现多路VSB-AM信号间的信噪比的平衡,相应的微波副载波频偏应有确定的比例关系.     

实时专家智能控制系统与外部控制过程的数据通信

本文介绍一个实时专家智能控制系统EICS.文中着重简述了专家系统与控制过程的数据通信方法、程序接口.     

对溢洪闸门自动监控系统中几个问题的探讨

结合某水电站介绍了溢洪闸门自动监控系统的结构、功能，讨论了该研制过程中的几个问题的解决办法．     

双相位编码在数据通信中的应用

双相位码是数据串行通信和记录中使用的一种编码方法。在集散控制系统中使用的磁带机和飞行数据记录器中得到广泛应用。本文主要介绍双相位码的编码、译码原理及双相位码的特点;重点论述双相位码的编码和译码过程在微机上的实现。工程实践和实验表明,用微机实现双相位码的编码和译码过程是切实可行的。试用在TDC-2000集散控制系统中获得了圆满成功。     

Optimal task allocation in hypercube multiprocessor ensembles

Criteria are established to determine the optimal policy for allocating a set of uniform tasks onto a multiprocessor hypercube ensemble. It is shown that the optimal policy depends on the ratio of computation to intertask communication required by the distributed program, and that based on this ratio, tasks should be placed either all on one processor or uniformly distributed over the largest possible hypercube.     

集群移动通信系统的组网设计

本文对集群移动通信系统在组网设计时应考虑的问题进行了分析，并提出了具体步骤和方法，可供集群系统组网设计时参考。     

DX型数据采集与无线传输系统

DX型数据采集与无线传输系统能对油井压力、温度、载荷和流量等参数进行自动采集 ,并通过无线传输向总站提供实时参数 ,为及时决策提供信息。数据采集系统采用STD总线 ,测量精度高、故障低 ;无线传输系统采用短波电台和具有自动纠错功能的数传机 ,抗噪能力强、可靠性高。文章介绍了DX型数据采集与无线传输系统的组成、工作原理、功能和主要技术指标     

CADRE: An Asynchronous Embedded DSP for Mobile Phone Applications

Asynchronous design techniques have a number of compelling features that make them suited for complex system on chip designs. However, it is necessary to develop practical and efficient design techniques to overcome the present shortage of commercial design tools. This paper describes the development of CADRE (Configurable Asynchronous DSP for Reduced Energy), a 750K transistor, high performance, low-power digital signal processor IP block intended for digital mobile phone chipsets. A short time period was available for the project, and so a methodology was developed that allowed high-level simulation of the design at the earliest possible stage within the conventional schematic entry environment and simulation tools used for later circuit-level performance and power consumption assessment. Initial modeling was based on C behavioral models of the various data and control components, with the many asynchronous control circuits required automatically generated from their specifications. This has enabled design options to be explored and unusual features of the design, such as the Register Bank which is designed to exploit data access patterns, are presented along with the power and performance results of the processor as a whole.     

某实时控制系统在QNX上的具体实现

简述了QNX实时操作系统的特点，详细介绍了一实时控制系统在QNX4．25上的具体实现。