Riemann-Liouville型分数阶导数的非线性估计（英文）

本文主要研究任意有界连续信号的Riemann-Liouville分数阶导数估计问题.当分数阶α属于0到1时,首先利用滑模技术提出一种有界连续信号分数阶导数的非线性估计方法;然后将其结果推广至分数阶α∈R⁺的情况,并给出相应的非线性估计方案.借助Riemann-Liouville分数阶微积分频率分布模型,本文详细分析讨论了所给分数阶导数非线性估计的收敛性问题,并得到相应闭环系统是渐近稳定的结论.文中所提方法的主要优点是在事先未知给定信号分数阶导数上界的情况下,不仅能自适应地估计其Riemann-Liouville分数阶导数,而且当信号中含有随机噪声和不确定扰动时依然能正常工作.数值仿真实例验证了本文所给估计方法的可行性和有效性.     

5G时代,有线接入网基础资源布局思路探讨

双千兆时代,网络规模空前巨大,有线接入网更是因覆盖范围广,建设规模大,投入人力多,投资占比高等因素,成为研究重点。文章根据有线接入网架构演进,从“点(各类业务及分纤点)、线(各级管线)、面(业务汇聚区)”三个层面对基站、家客、集客等业务接入、分纤点规划及业务汇聚机房等基础资源规划进行研究。     

一种增强型PTP光纤级联精细时频同步方法

该文提出了一种增强型PTP光纤级联精细时频同步方法,该方法以PTP同步技术为基础,结合同步以太网时钟传递技术和基于数字双混频时差法的多级级联精细时钟同步技术,对PTP技术进行改进和增强,然后基于该方法,通过多级时频设备光纤级联的形式实现多节点、大跨度、网络化的时频信号传递与同步输出,并解决多级级联情况下同步精度会逐级恶化的问题,实现ns量级的系统时间同步精度,保证系统各环节在高度统一的时间尺度下进行高效同步与联动工作。通过设计、试验,验证了该方法的可行性和有效性。     

High Figure of Merit (FOM) of Bragg Modes in Au‐Coated Nanodisk Arrays for Plasmonic Sensing

Gold‐coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface‐enhanced Raman scattering (SERS), large‐scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface‐guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold‐coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96‐well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high‐performance plasmonic sensing.     

Bragg Edge Neutron Transmission Strain Tomography in Granular Systems

The advent of pixelated detectors for time‐of‐flight neutron transmission experiments has raised significant interest in terms of the potential for tomographic reconstructions of triaxial strain distributions. A recent publication by Lionheart and Withers [WRB Lionheart and PJ Withers, “Diffraction tomography of strain”, Inverse Problems, v31:045005, 2015] has demonstrated that reconstruction is not possible in the general sense; however, various special cases may exist. In this paper, we outline a process by which it is possible to tomographically reconstruct average triaxial elastic strains within individual particles in a granular assembly from a series of Bragg edge strain measurements. This algorithm is tested on simulated data in two and three dimensions and is shown to be capable of rejecting Gaussian measurement noise. Sources of systematic error that may present problems in an experimental implementation are briefly discussed.     

Controlled chemical modification of the internal surface of photonic crystal fibers for application as biosensitive elements

Photonic crystal fibers (PCF) are one of the most promising materials for creation of constructive elements for bio-, drug and contaminant sensing based on unique optical properties of the PCF as effective nanosized optical signal collectors. In order to provide efficient and controllable binding of biomolecules, the internal surface of glass hollow core photonic crystal fibers (HC-PCF) has been chemically modified with silanol groups and functionalized with (3-aminopropyl) triethoxysilane (APTES). The shift of local maxima in the HC-PCF transmission spectrum has been selected as a signal for estimating the amount of silanol groups on the HC-PCF inner surface. The relationship between amount of silanol groups on the HC-PCF inner surface and efficiency of following APTES functionalization has been evaluated. Covalent binding of horseradish peroxidase (chosen as a model protein) on functionalized PCF inner surface has been performed successively, thus verifying the possibility of creating a biosensitive element.     

基于相空间重构与高斯过程的卫星钟差预报

提出了一种基于相空间重构与高斯过程预报卫星钟差的新方法。首先根据星载原子钟的物理特性用多项式进行拟合以提取钟差趋势项,并对拟合后的残差进行经验模态分解,作降噪处理;然后以降噪后的残差时间序列的混沌特性为基础,对其进行相空间重构;最后以重构的相空间为基础,运用高斯过程对残差时间序列进行建模预报,再将预报结果加上趋势项,获得最终的钟差预报值。采用IGS提供的GPS超快速观测钟差建模进行短期预报实验,结果表明,该方法能实时有效地对卫星钟差进行预报,且精度优于超快速预报钟差。     

熔体静电纺的电场分布对三维自组装聚对苯二甲酸乙二酯纤维膜形貌的影响

熔体静电纺可自组装三维锥状纤维膜。借助ANSYS软件模拟熔体静电纺反纺工艺不同参数(纺丝电压、接收距离、接收板面积)条件下的电场分布,探讨电场分布对熔体静电纺三维自组装聚对苯二甲酸乙二酯(PET)纤维膜几何结构与纤维形貌的影响。结果表明,在单喷嘴-平板结构模型中,提高电压将整体增强空间电场强度,同时电场不均匀性也被放大,所纺三维PET纤维膜尺寸(底面积、厚度、质量)有所增加,纤维膜锥角变小,纤维直径明显下降;接收距离的改变对接收板表面的电场影响显著,随着接收距离的增加,纤维膜尺寸有所减小,当接收距离较小时,纤维膜顶端锥角仅为56°,而纤维直径变化不大;接收板面积的缩小可以改善喷嘴与接收板间及接收板表面电场分布的均匀性,纤维膜尺寸增加,纤维膜锥角逐渐变小,纤维膜表面的镂空现象明显,所纺纤维平均直径稍有减小。     

氧化镧/聚丙烯防X射线复合纤维的制备及性能表征

先采用熔融纺丝方法制备了不同氧化镧含量的氧化镧/聚丙烯复合纤维,然后采用对二甲苯在相同处理时间(1 h)不同温度(105~109℃)下溶解复合纤维中的部分聚丙烯基体以提高纤维中氧化镧含量,并对处理过后的纤维进行扫描电镜、X射线屏蔽性能等测试。此外,采用硅烷偶联剂改性氧化镧,通过熔融纺丝法制备了表面活性氧化镧/聚丙烯复合纤维,并对其作了差示扫描量热分析、扫描电镜、力学测试等性能表征。实验结果表明,随未改性氧化镧添加量增加,纤维力学性能下降,玻璃化转变温度向低温方向移动,纤维热稳定提高;有机改性可改善氧化镧在聚丙烯中的分散,提高纤维的力学性能,纤维玻璃化转变温度较纯聚丙烯纤维升高;用对二甲苯在107℃处理1h所获取的复合纤维中氧化镧含量最高,X射线屏蔽性能最优。