Dynamic Survivability in WDM Mesh Networks Under Dynamic Traffic

Network survivability is a crucial requirement in WDM mesh networks. In this paper, we systematically consider the problem of dynamic survivability with dynamic single link failure in WDM networks under dynamic traffic demands. Specifically, we investigate various protection schemes, such as dedicated path protection (DPP), shared path protection (SPP), dedicated link protection (DLP), shared link protection (SLP), and two restoration schemes, path restoration (PR) and link restoration (LR). Moreover, two new shared protection methods are proposed, i.e., SRLG-based shared link protection (SRLG-SLP) and SRLG-based shared path protection (SRLG-SPP). The SRLG (shared risk link group) constraint defines the availability of protection resources to a working path, which requires that any two working paths sharing the same risk of failure (or in the same SRLG) cannot share the same protection resources. Furthermore, in our study, we consider a more practical dynamic single-link failure model, in which the link-failure-interarrival time and link-failure-holding time are considered as two independent parameters. Based on this link-failure model, extensive simulations are done to analyze and compare the dynamic survivable performance of various protection and restoration schemes. Resource utilization, protection efficiency, restoration efficiency, and service disruption ratio are employed as survivable performance metrics versus traffic load, link-failure frequency, and link-failure reparation time to evaluate the survivable performance. Many meaningful results are given. In addition, we show that the developed SRLG-SLP and SRLG-SPP protection schemes perform very well in terms of protection efficiency and service disruption ratio, while sacrificing some performance in terms of resource utilization.     

Sol-gel preparation of a di-ureasil electrolyte doped with lithium perchlorate

Solid polymer electrolytes (SPEs) synthesized by the sol-gel process and designated as di-ureasils have been prepared through the incorporation of lithium perchlorate, LiClO₄, into the d-U(2000) organic-inorganic hybrid network. Electrolytes with lithium salt compositions of n (where n indicates the number of oxyethylene units per Li⁺ ion) between ∞ and 0.5 were characterized by conductivity measurements, cyclic voltammetry at a gold microelectrode, thermal analysis and Fourier transform Raman (FT-Raman) spectroscopy. The conductivity results obtained suggest that this system offers a quite significant improvement over previously characterized analogues doped with lithium triflate [S.C. Nunes, V. de Zea Bermudez, D. Ostrovskii, M.M. Silva, S. Barros, M.J. Smith, R.A. Sá Ferreira, L.D. Carlos, J. Rocha, E. Morales, J. Electrochem. Soc. 152 (2) (2005), A429]. “Free” perchlorate ions, detected in all the samples examined, are identified as the main charge carriers in the sample that yields the highest room temperature conductivity (n = 20). In the di-ureasils with n ≤ 10 ionic association is favoured and the ionic conductivity drops.     

A Review of Wavelets for Digital Wireless Communication

Wavelets have been favorably applied in almost all aspects of digital wireless communication systems including data compression, source and channel coding, signal denoising, channel modeling and design of transceivers. The main property of wavelets in these applications is in their flexibility and ability to characterize signals accurately. In this paper recent trends and developments in the use of wavelets in wireless communications are reviewed. Major applications of wavelets in wireless channel modeling, interference mitigation, denoising, OFDM modulation, multiple access, Ultra Wideband communications, cognitive radio and wireless networks are surveyed. The confluence of information and communication technologies and the possibility of ubiquitous connectivity have posed a challenge to developing technologies and architectures capable of handling large volumes of data under severe resource constraints such as power and bandwidth. Wavelets are uniquely qualified to address this challenge. The flexibility and adaptation provided by wavelets have made wavelet technology a strong candidate for future wireless communication. Madan Kumar Lakshmanan was born in Chennai, India, in 1979. He received the B.E. (with distinction) in electrical engineering from the University of Madras, Chennai, India, in 2000. He joined the Indian Software firm, Polaris Software Labs Ltd., in 2000 where he wrote software for Telecommunication applications. At Polaris, he was awarded the “On The Spot Of Excellence Award” for his efforts. In 2003, he moved to the Indian Institute of Technology-Madras, to develop and establish a wireless communications network for rural connectivity. In 2004, he was awarded the Royal Dutch/Shell Chevning scholarship to pursue a Master degree in Telecommunications at the Delft University of Technology (TUDelft). At TUDelft he is affiliated to the International Research Center for Telecommunications-Transmission and Radar (IRCTR) where he is undertaking research in the field of wavelets applications in Wireless Communications. Homayoun Nikookar received his Ph.D. in Electrical Engineering from Delft University of Technology (TUDelft), The Netherlands, in 1995. From 1995 to 1998 he was a postdoc researcher at the International Research Center for Telecommunications-Transmission and Radar, TUDelft, where since 1999 he has been an Assistant Professor. Dr. Nikookar has done research on different areas of wireless communications, including wireless channel modeling, UWB, MIMO, multicarrier transmission, Wavelet-based OFDM and CDMA. He is a senior member of the IEEE.     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

Linearly many faults in Cayley graphs generated by transposition trees

We prove that when linearly many vertices are deleted in a Cayley graph generated by a transposition tree, the resulting graph has a large connected component containing almost all remaining vertices.     

Enhancing cognitive radio systems with robust reasoning

Cognitive radio systems dynamically reconfigure the algorithms and parameters they use, in order to adapt to the changing environment conditions. However, reaching proper reconfiguration decisions presupposes a way of knowing, with high enough assurance, the capabilities of the alternate configurations, especially in terms of achievable transmission capacity and coverage. The present paper addresses this problem, firstly, by specifying a complete process for extracting estimations of the capabilities of candidate configurations, in terms of transmission capacity and coverage, and, secondly, by enhancing these estimations with the employment of a machine learning technique. The technique is based on the use of Bayesian Networks, in conjunction with an effective learning and adaptation strategy, and aims at extracting and exploiting knowledge and experience, in order to reach robust (i.e. stable and reliable) estimations of the configurations' capabilities. Comprehensive results of the proposed method are presented, in order to validate its functionality. Copyright © 2007 John Wiley & Sons, Ltd.     

Dissolution kinetics of ulexite in acetic acid solutions

Ulexite is an important boron mineral used for the production of boron compounds. The aims of this study are to examine the dissolution kinetics of ulexite in acetic acid solutions, and to present an alternative process to produce boric acid. In order to investigate the dissolution kinetics of ulexite in acetic acid solutions, the concentration of solution, reaction temperature, solid-to-liquid ratio, and particle size were selected as experimental parameters. It was determined that the dissolution rate of ulexite increased with increasing solution concentration and temperature and decreasing particle size and solid-to-liquid ratio. The activation energy of the process was found to be 55.8 kJ/mol.     

Evolving Fault-Tolerant Neural Networks

In this paper, genetic algorithm is used to help improve the tolerance of feedforward neural networks against an open fault. The proposed method does not explicitly add any redundancy to the network, nor does it modify the training algorithm. Experiments show that it may profit the fault tolerance as well as the generalisation ability of neural networks.     

Memory of Distributed Computer Systems: Distinctive Features of Their Architectural-Structural Organization and Use

Distinctive features of architectural-structural organization and use of memory networks are considered with the aim of choosing an optimal configuration in designing distributed computer systems.     

Passivity Analysis of Dynamic Neural Networks with Different Time-scales

Dynamic neural networks with different time-scales include the aspects of fast and slow phenomenons. Some applications require that the equilibrium points of the designed networks are stable. In this paper, the passivity-based approach is used to derive stability conditions for dynamic neural networks with different time-scales. Several stability properties, such as passivity, asymptotic stability, input-to-state stability and bounded input bounded output stability, are guaranteed in certain senses. A numerical example is also given to demonstrate the effectiveness of the theoretical results.