Material removal and surface damage in EDM of Ti3SiC2 ceramic

Material removal and surface damage of Ti₃SiC₂ ceramic during electrical discharge machining (EDM) were investigated. Melting and decomposition were found to be the main material removal mechanisms during the machining process. Material removal rate was enhanced acceleratively with increasing discharge current, i_e, working voltage, u_i, but increased deceleratively with pulse duration, t_e. Microcracks in the surface and loose grains in the subsurface resulted from thermal shock were confirmed, and the surface damage in Ti₃SiC₂ ceramic led to a degradation of both strength and reliability.     

The Gender Congruency Effect and the Selection of Freestanding and Bound Morphemes: Evidence From Croatian.

The authors report 3 picture-word interference experiments in which they explore some properties of the agreement process in speech production. In Experiment 1, Croatian speakers were asked to produce utterances in which the noun's gender value had an impact on the selection of gender-marked freestanding morphemes (pronouns) while ignoring the presentation of same- or different-gender distractor words. In Experiments 2 and 3, Croatian speakers were asked to name the same pictures using noun phrases in which the noun's gender value surfaced as an inflectional suffix. Different-gender distractors interfered more than same-gender distractors (the gender congruency effect) in Experiment 1, but not in Experiments 2 and 3. These contrasting results show that the cause of the gender congruency effect is not at the level where lexical-grammatical information is selected but at the level of selection of freestanding morphemes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

When more is less: A counterintuitive effect of distractor frequency in the picture-word interference paradigm.

Pictures were shown with superimposed word distractors of high and low frequency. Low-frequency distractors produced greater interference on picture naming than did high-frequency distractors. This distractor frequency effect was not affected by manipulations that facilitated or hindered distractor recognition. Interference was reduced for distractors that were read aloud several times prior to being shown in the picture-naming task. Together these findings suggest that the distractor frequency effect has its locus at some stage of lexical access for production. Other findings further constrain hypotheses about which level of speech production is involved in the effect. The distractor frequency effect has implications for models of lexical processing in speaking as well as for accounts of picture-word interference and the frequency effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Motion compensated film restoration

Motion picture films are susceptible to local degradations such as dust spots. Other deteriorations are global such as intensity and spatial jitter. It is obvious that motion needs to be compensated for before the detection/correction of such local and dynamic defects. Therefore, we propose a hierarchical motion estimation method ideally suited for high resolution film sequences. This recursive block-based motion estimator relies on an adaptive search strategy and Radon projections to improve processing speed. The localization of dust particles then becomes straightforward. Thus, it is achieved by simple inter-frame differences between the current image and motion compensated successive and preceding frames. However, the detection of spatial and intensity jitter requires a specific process taking advantage of the high temporal correlation in the image sequence. In this paper, we present our motion compensation-based algorithms for removing dust spots, spatial and intensity jitter in degraded motion pictures. Experimental results are presented showing the usefulness of our motion estimator for film restoration at reasonable computational costs. Received: 9 July 2000 / Accepted: 13 January 2002 Correspondence to:S. Boukir     

Tribological behavior of PTFE nanocomposite films reinforced with carbon nanoparticles

Carbon-based nanoparticles synthesized by heat treatment of nanodiamond in the temperature range of 1000–1900 °C were added to PTFE film to investigate the structural effect of the carbon particles on the tribological properties of PTFE composite film. Carbon-based nanoparticles were prepared by milling with micron sized beads in chemically treated water before their addition to PTFE film. The wear and frictional properties of PTFE nanocomposite film were measured by the ball on plate type wear test. The wear resistance of PTFE film was found to be enhanced by the addition of 2 wt% of carbon nanoparticles. The wear coefficient of PTFE film was decreased from 16.2 to 3.5 × 10⁻⁶ mm³/N m by the addition of carbon-based nanoparticles heat-treated at 1000 °C. Increasing the heating temperature of the nanodiamonds caused the extent of aggregation and particle size to increase. The wear resistance of PTFE nanocomposite film was enhanced by the addition of nanodiamonds heat-treated at 1000 °C, but decreased when the heat treatment temperature of carbon nanoparticles was further increased. Tribological behavior of PTFE nanocomposite films depending on the types of carbon nanoparticles were explained based on the structural, physical and chemical modification of carbon nanoparticles.     

Study of the effective parameters on mechanical and electrical properties of carbon black filled PP/PA6 microfibrillar composites

In this study the electrical and mechanical properties of microfibrillar polypropylene (PP)/polyamide6 (PA6) blend filled with super conductive carbon black (CB) have been investigated. In situ microfibrillar PP/PA6 composites filled with CB are produced using a single screw extruder equipped with a spinneret. Glycidyl methacrylate (GMA) grafted polypropylene (PP-g-GMA) is used as the compatibilizer. To investigate the effects of extensional flow on the microstructure, electrical and mechanical properties, three adaptors with various convergence angles were designed, prepared and applied between the extruder and the spinneret. To optimize the effects of processing and material parameters on the electrical and mechanical properties, the Taguchi method of experimental design is used. Material and processing factors which are studied include: concentration of PA6, compatibilizer level, CB concentration, drawing speed of melt spinning line, adaptor angle, order of mixing and temperature profile along the extruder. The results show an increase in DC conductivity of up to 10¹¹ times in comparison with pure PA6, by increasing the concentration of CB, drawing speed, adaptor angle and optimizing other parameters. By optimizing processing and material factors studied here, strength of microfibrillar structured composites is increased of up to 80% in comparison to pure PP.     

Studies of substrate specificities of lipases from different sources

Although lipases are widely applied in a wide variety of reactions, available information on the factors that are responsible for the substrate specificities of lipases from different sources is scarce. In this paper, nine lipase‐producing microorganism strains were isolated from oil‐containing samples. The properties of these enzymes, including pH optima, temperature optima, thermal stability, and pH stability, vary significantly with the different sources from which these lipases were isolated. The substrate specificities of the nine lipases, including fatty acid and positional specificities, were also studied. The fatty acid specificities of the nine lipases were observably different toward 15 substrates with different carbon chain lengths, different saturation degrees and different side chains. The lipases from S₃ Penicillium citrinum (PCL), MJ₁ Aspergillus niger (ANL), MJ₂ Aspergillus oryzae (AOL), YM Bacillus coughing (BCL), S₉ Geotrichum candidum (GCL), and S₁₁ Candida lypolytica (CLL) showed the strongest specificities to short‐chain esters, and the other lipases showed strong selectivity for medium‐ or long‐chain and branched esters. The positional specificities were examined by analyzing the hydrolytic products of triolein catalyzed by the nine lipases, using TLC. The lipases can be mainly classified into two groups by their specificities for the ester bond at position 2 of triglycerides; one group can selectively hydrolyze the ester bond at position 2 of the triglycerides, the other group cannot. All these nine lipases were divided into four groups by hierarchical clustering analysis on the basis of the results of fatty acid and positional specificities.     

基于HMS87C1408B的籽棉、菜籽和粮食水分综合测试仪

介绍了使用HMS87C1408B作为主控芯片的籽棉、菜籽和粮食水分综合测试仪的实现方法,重点说明了阻抗变换、软件驱动LCD和语音播报技术的实施.     

SWRH82B钢中w(N)的控制

分析了武钢一炼钢厂SWRH82B生产过程中导致钢水增氮的各种因素，介绍了相应的控制措施及效果。     

Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures

In this study, analytical modeling of the tensile strength of hot-mix asphalt (HMA) mixtures at low temperatures was developed. To do this, HMA mixtures were treated as a two-phase composite material with aggregates (coarse and fine) dispersed in an asphalt mastic matrix. A two-phase composite model, which was similar to Papanicolaou and Bakos's [J. Reinforced Plast. Compos. 11 (1992) 104] model with a particle embedded in an infinite matrix, was proposed. Unlike Papanicolaou and Bakos's model, an axial stress was introduced to the fiber end to consider the load transferred from the asphalt mastic the aggregate. Efforts were also made to consider the effect of aggregate gradation, asphalt mastic degradation, and interfacial damage between the aggregates and asphalt mastic matrix on the tensile strength of the HMA mixtures. Experimental investigations were conducted to validate the developed theoretical relations. A reasonable agreement was found between the predicted tensile strength and the experimental results at low temperatures. Parameters affecting the tensile strength of asphalt mixtures were discussed based on the calculated results.