WLAN技术在静爆威力测试中的应用

冲击波测试中测点分布数量较多,难以集中管理以及监测各测点的状态存在困难,并且测试参数一旦设置好在现场难以更改。针对以上问题,设计了基于WLAN技术的冲击波测试系统。建立了能有效覆盖各测试节点的无线网络,实现了所有测点远程集中管理、运行状态监测以及测试数据无线传输,并且可现场设置节点测试参数,以适应测试环境的变化,提高了系统的灵活性。设计了硬件电路和软件时序相结合的方法智能管理节点无线模块,有效降低了系统功耗并实现了可循环进行多次不同的测试。采用多参数组合的负延迟分区存储数据的方法,有效获取了完整的冲击波信号并减少了随机触发前的冗余数据。系统参加了多次弹药测试实验,验证了系统的稳定性、可靠性。     

基于DSP总线的振动传感器信号采集系统设计

以TMS320F2808控制的CAN模块为核心,设计了CAN总线节点模块,以实现对ICP振动传感器的振动信号进行实时检测和处理[1]。通过描述系统的硬件设计原理和软件框架流程,介绍系统的设计和实现方法。该系统能够满足传感器系统对实时性的要求,方便、易携,并且具有可重构性,能够实现不同的算法。     

Authentication of the 31 species of toxic and potent Chinese materia medica by microscopic technique assisted by ICP-MS analysis, part 4: four kinds of toxic and potent mineral arsenical CMMs

Toxic and Potent Chinese Materia Medica (T/PCMM) is a special and very important category of Chinese medicines. They have long been used in traditional medical practice and are being used more and more widely throughout the world in recent years. As there may be many fatal toxic effects caused by misusing or confusion of T/PCMM, their quality and safety control arouse increasing attention internationally. Researches on the accurate identification to ensure the safe use of T/PCMM are acquired; however, there are few reports on authentication. We are carrying out a series of studies on 31 T/PCMM originating from plants, animals, minerals, and secreta. In our previous studies, we proved that modern microscopic authentication is a simple, fast, effective, low cost, and less toxic method for identifying animal, seed, and flower T/PCMM. In the present study, we focused on the authentication of four kinds of mineral arsenicals, including orpiment (mainly containing As₂S₃), realgar (mainly containing As₄S₄), arsenolite, and arsenic trioxide (mainly containing As₂O₃). We examined the macroscopic and microscopic characteristics of the above minerals and found that they all can be easily identified and authenticated by using light microscopy coupled with polarized microscopy. Moreover, the authentication results for arsenolite and arsenic trioxide are confirmed by ICP‐MS analysis. We are sure that the morphological and microscopic characteristics indicated here are indispensable to establishing standards for these four mineral T/PCMMs. Microsc. Res. Tech. 74:1‐8, 2011. © 2010 Wiley‐Liss, Inc.     

The application of inductively coupled plasma mass spectrometry in clinical pharmacological oncology research

Metal-based anticancer agents are frequently used in the treatment of a wide variety of cancer types. The monitoring of these anticancer agents in biological samples is important to understand their pharmacokinetics, pharmacodynamics, and metabolism. In addition, determination of metals originating from anticancer agents is relevant to assess occupational exposure of health care personnel working with these drugs. The high sensitivity of inductively coupled plasma mass spectrometry (ICP-MS) has resulted in an increased popularity of this technique for the analysis of metal-based anticancer drugs. In addition to the quantitative analysis of the metal of interest in a sample, ICP-MS can be used as an ultrasensitive metal selective detector in combination with speciation techniques such as liquid chromatography. In the current review we provide a systematic survey of publications describing the analysis of platinum- and ruthenium-containing anticancer agents using ICP-MS, focused on the determination of total metal concentrations and on the speciation of metal compounds in biological fluids, DNA- and protein-adducts, and environmental samples. We conclude that ICP-MS is a powerful tool for the quantitative analysis of metal-based anticancer agents from multiple sample sources.     

基于改进ICP的复杂机械零件测量点云配准方法

点云配准是基于机器视觉进行复杂机械零件三维非接触精密测量的关键环节。针对传统迭代最近点(iterative closest point, ICP)算法对初始位置依赖性强,迭代收敛速度慢,错误对应点对多,难以满足大批量复杂机械零件测量点云配准效率和精度要求的问题,提出了一种基于ISS-FPFH(intrinsic shape signature-fast point feature histogram)特征结合改进ICP的复杂机械零件测量点云配准方法。为了减少点云配准数量,并保留点云表面原来的细微特征,提出了基于重心邻近点的体素滤波器对点云进行下采样预处理。为解决传统ICP算法因合适初始位置难以确定而导致多视角测量点云配准失败的问题,采用了基于ISS-FPFH特征的采样一致性初始配准(sample consensus intial alignment, SAC-IA)算法进行粗配准。为解决传统ICP算法迭代收敛速度慢、错误对应点对多的问题,提出结合法向量夹角约束的点到平面ICP算法进行精配准。以斯坦福大学的bunny点云模型为对象,验证了本文提出方法对噪声点云的鲁棒性。以常见的复杂机械零...     

基于径向曲线与支持向量回归的颅骨修复方法

颅骨修复技术是对有缺损的颅骨补全对应的缺损部分,进而实现颅骨形状的完整性。针对高维颅骨数据,采用径向曲线来表示颅骨几何特征,结合最小二乘支持向量回归的方法构建颅骨修复模型。提取完整的三维颅骨模型的径向曲线,将其分为已有径向曲线和缺失径向曲线两部分作为训练样本,采用最小二乘支持向量回归统计模型复原出待修复颅骨的缺失径向曲线,进而合并生成待修复颅骨的完整径向曲线,通过迭代最近点算法将合并的颅骨径向曲线与颅骨统计模型进行匹配生成完整的三维颅骨模型。实验结果表明,该方法的平均误差达到6.834×10^-3,比主成分分析方法降低2.90倍,具有更好的修复效果。     

Analytical‐Based Methodologies for Examining the In Vitro Absorption,Distribution, Metabolism,and Elimination (ADME) of Silver Nanoparticles

The clinical applications of silver nanoparticles (AgNPs) remain limited due to the lack of well‐established methodologies for studying their nanokinetics. Hereby, the primary goal is to adapt a suite of analytical‐based methodologies for examining the in vitro absorption, distribution, metabolism, and elimination of AgNPs. Vero 76 and HEK 293 cells are exposed to ≈10‐nm spherical AgNPs⁺ and AgNPs^? at relevant concentrations (0–300 µg mL^?1) and times (4–48 h). Absorption: Inductively coupled plasma optical emission spectroscopy (ICP‐OES) demonstrates that the two AgNP formulations are not bioequivalent. For example, different bioavailabilities (C _maximum < 20.7 ± 4% and 6.82 ± 0.4%), absorption times (T _maximum > 48 and ≈24 h), and absorption rate laws (first‐ and zeroth‐order at 300 µg mL^?1) are determined in Vero 76 for AgNPs⁺ and AgNPs^?, respectively. Distribution: Raman and CytoViva hyperspectral imaging show different cellular localizations for AgNPs⁺ and AgNPs^?. Metabolism: Cloud point extraction (CPE)‐tangential flow filtration (TFF) reveal that ≤ 11% ± 4% of the administered, sublethal AgNPs release Ag⁺ and contribute to the observed cytotoxicity. Elimination: ICP‐OES‐CPE suggests that AgNPs are cleared via exocytosis.     

Multi-sensor calibration through iterative registration and fusion

In this paper, a new multi-sensor calibration approach, called iterative registration and fusion (IRF), is presented. The key idea of this approach is to use surfaces reconstructed from multiple point clouds to enhance the registration accuracy and robustness. It calibrates the relative position and orientation of the spatial coordinate systems among multiple sensors by iteratively registering the discrete 3D sensor data against an evolving reconstructed B-spline surface, which results from the Kalman filter-based multi-sensor data fusion. Upon each registration, the sensor data gets closer to the surface. Upon fusing the newly registered sensor data with the surface, the updated surface represents the sensor data more accurately. We prove that such an iterative registration and fusion process is guaranteed to converge. We further demonstrate in experiments that the IRF can result in more accurate and more stable calibration than many classical point cloud registration methods.     

Run-to-run control of inductively coupled C2F6 plasma etching of SiO2: Construction of a numerical process with a computational fluid dynamics code

A numerical process to simulate SiO₂ dry etching with inductively coupled C₂F₆ plasmas has been constructed using a commercial CFD code as a first step to design a run-to-run control system. The simulator was found to reasonably predict the reactive ion etching behavior of C₂F₆ plasmas and used to investigate the effects of plasma operating variables on the etch rate and uniformity. The relationship between the operating variables and the etching characteristics was mathematically modeled through linear regression for future run-to-run control system design.     

高职院校辅导员素质结构分析与研究

基于问卷调查及统计分析,将高职院校辅导员素质分为：思政管理素质、职业指导和个人能力素质专业能力素质.在此基础上构建了象限模型,包括价值观维度、知识能力维度、社会认知维度和专业能力维度4个方面.其中价值观维度描述思想政治素质;知识能力维度描述个人综合素质;社会认知维度描述行业企业需求;专业能力维度描述专业技能要求.