制丝线FT651型叶片垂直分片机控制系统的改进方案

针对叶片垂直分片机使用过程中出现的劈坏烟箱、纵向移动刀架失控和系统无报警功能等问题,分析故障产生的原因,并对其控制系统进行改进。     

基于北斗卫星的森林火灾监控终端设计

针对传统森林火灾监控方式存在的受地形限制,导致火灾发现不及时和定位难的缺陷,设计了基于北斗卫星的森林火灾监控系统,实现了火灾智能识别和预警,并且可以对火源、火场进行快速定位和信息通报;终端包括烟采集处理模块、图像采集模块、DSP处理模块、ARM主控模块和北斗卫星通信模块五部分,从烟和火焰两个方面对森林实时进行监控,分别采用离子烟雾传感器和DSP火焰识别混合算法,提取火焰图像差值和火焰图像边界参数的方法,提高了识别的准确率;试验证明,系统具有结构简单、使用方便和识别智能化的特点。     

The adsorption characteristics of two Mo sites on a sulfided MoO3/γ-Al2O3 surface

The surface structure of the oxidized and ammonia dissolved MoO₃/-Al₂O₃ samples and the adsorption characteristics of the sulfided samples were investigated by Laser Raman Spectroscopy (LRS) and Low Temperature Infrared Spectroscopy (LTIR) techniques.It was verified that there were two kinds of coordinated unsaturated Mo sites (denoted as Mo_A(CUS) and Mo_B(CUS)) on the surface and the precursors of Mo_A(CUS) and Mo_B(CUS) were Mo(O) and Mo(T), respectively. It was also concluded that Mo_A(CUS) sites could adsorb NO and CO, while Mo_B(CUS) could adsorb CO only. The surface concentration of Mo_A(CUS) might be far smaller than that of Mo_B(CUS).     

基于码本模型和多特征的早期烟雾检测

提出一种基于码本模型和多特征的早期烟雾检测算法。首先,利用码本模型进行前景提取;然后,结合烟雾的颜色模型和形状特征模型检测前景中的疑似烟雾区域;最后,利用烟雾的动态特性,有效地降低误检率,提高算法的鲁棒性。通过ROC曲线对比,实验结果表明,该算法具有良好的烟雾检测能力。同时,能够满足实时性要求,具有较高的实用价值。     

Simulation of smoke flow and longitudinal ventilation in tunnel fire

1 Introduction The tunnel is one of the important facilities of railroad and highway transportation, and also a throat of railroad and highway. With the development of transportation, there are more and more tunnels. Although the tunnel fire occurs seldo…     

Effect of Bio-Based Cobalt Alginate on the Fire Safety and Mechanical Properties for Epoxy Resin

There is a growing demand to develop epoxy resins (EP) with smoke suppression as well as satisfactory flame retardancy. Herein, bio-based cobalt alginate is successfully fabricated and incorporated into EP to prepare EP/Cobalt Alginate composites with better fire safety performance. The addition of cobalt alginate reduces the thermal-decomposition rate, temperature at maximum weight-loss rate of EP, whereas obviously improves the thermal stabilities at a higher temperature range. Furthermore, the addition of cobalt alginate substantially reduces the fire hazard of EP, resulting in 56.2% reduction in peak heat release rate, as well as 17.8% and 56.3% reduction in total smoke production and peak smoke production rate, respectively, compared with EP matrix. Moreover, the presence of cobalt alginate increases smoke-suppressant properties, according to the smoke density test. Additionally, the incorporation of cobalt alginate has no obviously destructive effect on the mechanical properties of EP, while EP/Cobalt Alginate-3 exhibits a 27.0% improvement in impact strength. In prospective, this study may provide a significant method for producing eco-friendly flame retardant EP.     

涤纶帘子线的等离子体改性

运用等离子体对涤纶帘子线进行改性处理，从而提高涤纶帘子线与橡胶的粘合性，并用X光电子能谱和红外光谱表面分析技术分析改性后的涤纶帘子线表面结构所发生的变化。     

Preparation and Characterization of K_n|Ga(H_2O)MW_(11)O_(39)|·xH_2O

In this paper the heteropoly complexes K_n[Ga(H_20)MW_(11)O_39)]·xH_20 [M=Cu(Ⅱ), Co(Ⅱ), Cr(Ⅲ),Fe(Ⅲ), Mn(Ⅳ)] have been prepared in this laboratory firstly. The products were characterized by chemicalanalysis, ionexchange, IR, UV and X-ray powder diffraction.     

工业石蜡的结构分析

采用核磁共振（NMR），红外吸收光谱（IR）和色－质联用（GC－MS）方法，测定了弓弩用工业石蜡的^13C-NMR谱、反转门控^13C-NMR谱、IR光谱、气相色谱和各组分的质谱，确定了该石蜡9种主要组分及其相对含量。     

Propane oxydehydrogenation reaction on a VPO/TiO2 catalyst. Role of the nature of acid sites determined by dynamic in-situ IR studies

A VPO/TiO₂ catalyst tested in the oxydehydrogenation reaction (ODH) of propane between 300 and 400°C shows satisfactory performances (up to 80% of propene selectivity at 2% of propane conversion at 300°C or 56% of propene selectivity at 9% of propane conversion at 400°C). Addition of water or pyridine in the feed gas tends to decrease the propane conversion and enhances the propene selectivity. It is shown that water increases the number of Brönsted surface acid sites by dissociative adsorption which, in turn, enhances propene selectivity at the expense of the CO_x selectivity. These results are in good agreement with spectroscopic IR observations performed under catalytic conditions showing that the Lewis acid sites are linked to CO_xformation, whereas it seems that Brönsted sites would rather be linked to propene formation.