柳州,云浮,宣化三厂预热分解系统技术改进经验引起的思考

本文分析了柳州、云浮、宣化三厂预分解系统粘结堵塞、难以稳定生产和不能“达产达标”的原因,逐一介绍了三厂预分解系统技术改进的措施和效果,并就其技改工程经验进行了分析总结和探索思考.     

多尺度空间特征提取的脊柱图像拼接算法

针对脊柱图像视野有限,提出一种基于优化MSFE的脊柱图像自动拼接算法。设计出一种基于尺度因子变化的高斯卷积模板尺寸自适应调整以及双向配对办法;相似性度量采用城市距离;利用RANSAC算法去除错配,从而确定待拼接图像之间的变换参数,最后利用加权平均对图像融合。对实际取得的多幅脊柱图像拼接结果表明该算法具有很好的实时性和鲁棒性。     

Electrochemical copolymerization of aniline with m-aminophenol and novel electrical properties of the copolymer in the wide pH range

A copolymer, poly(aniline-co-m-aminophenol), has been synthesized using repeated potential cycling. The monomer concentration ratio, acid concentration and applied potential strongly affect the copolymerization rate and the properties of the copolymer. The optimum conditions for the copolymerization are that the scan potential range is controlled between −0.10 and 0.95 V (vs.SCE), and a solution consists of 0.34 M aniline, 0.012 M m-aminophenol and 2 M H₂SO₄. The IR spectra of the copolymers demonstrate that the m-aminophenol units are included in the copolymer chains. The cyclic voltammograms of the copolymers in 0.3 M Na₂SO₄ solution with various pH values were performed at the potential ranges from −0.20 to 0.80 V and at a scan rate of 60 mV s⁻¹. The results indicate that the copolymer still hold 41.7% of the electrochemical activity when the copolymer electrode was transferred from a solution of pH 5.0 to a solution of pH 11.0 in the potential range of −0.20 to 0.80 V. An impedance plot of the copolymer in a solution with pH 12.0 and at 0.40 V is constructed of a semicircle and a Warburg line with a slope of 1. This means that the electrode reaction of the copolymer at pH 12.0 is also under mass transfer control. The conductivity of the copolymer prepared under the optimum conditions is 1.42 S cm⁻¹, and slightly depends on the pH value. Thus, the pH dependence of the electrical properties of the copolymer is improved compared with poly(aniline-co-o-aminophenol), and is much better than that of the parent polyaniline.     

Study of alinite cement hydration by impedance spectroscopy

Two types of alinite cements, Mg-alinite and Zn-alinite, were synthesized using the reagent grade chemicals. Their hydration behavior was compared with ordinary Portland cement (OPC) using impedance spectroscopy (IS) and ²⁹Si nuclear magnetic resonance (NMR) spectroscopy. The bulk resistance in the IS spectra and the intensity ratio of the hydrous (Q₁ and Q₂) to anhydrous (Q₀) phases in the NMR spectra were estimated as the extent of hydration. The results obtained from both techniques were consistent each other. Mg-alinite had a comparable hydration rate to OPC and Zn-alinite exhibited faster hydration kinetics than Mg-alinite.     

In situ impedance study of the Y-Ni thin film under electrochemical hydrogenation

A thin film of yttrium Y (150 nm) protected by a 6 nm coating of nickel Ni on a glass substrate was completely hydrogenated in a 1 M NaOH electrolyte at a constant negative current until the transparent Y tri-hydride phase was achieved and hydrogen gas evolution from the electrode began. A series of impedance measurements were performed in situ during the electrochemical experiment to study the properties of the system as dependent on hydrogenation degree and time of relaxation. The equivalent electrical circuit (EEC) simulations were performed with a Randles-like scheme R₀[R₁CPE₁], where R₀ is the thin film electrode resistance, R₁ the charge transfer resistance and CPE₁ is the capacitive constant phase element. The behavior of all the components of the EEC undergoes a clear transition when the hydrogenation degree of the electrode is approximated to its maximum value (H to Y ratio 2.7) and electrochemical process changes from hydrogen uptake to hydrogen evolution.     

Polymeric sol–gel coatings as protective layers of aluminium alloys

Sol–gel route is an emerging technology to synthesize coatings of a wide variety of properties taylored. In this work three low temperature cured coatings has been studied to evaluate their protective properties in order to be used as protective barrier coatings for aluminium alloys with potential architectural and automotive applications. These three coatings are novel modified silane nanocomposites coatings obtained mixing two sols separately prepared: a pre-hydrolysed 3-glycidyloxypropyl trimethoxysilane (GPTS) with acidic catalyst and another obtained from tetraethylorthosilicate/methyltriethoxysilane (TEOS/MTES). Particulated coatings were obtained by addition of 25 wt.% particles of Aerosil 300 and Aerosil R972, respectively. The protective properties of the coatings were evaluated by electrochemical impedance spectroscopy (EIS) which showed notably differences among them not only from the protective viewpoint but the hydrophobic nature of the coatings and the controlling corrosion mechanism in each case.     

HEGM: A hierarchical elastic graph matching for hand gesture recognition

A hierarchical scheme for elastic graph matching applied to hand gesture recognition is proposed. The proposed algorithm exploits the relative discriminatory capabilities of visual features scattered on the images, assigning the corresponding weights to each feature. A boosting algorithm is used to determine the structure of the hierarchy of a given graph. The graph is expressed by annotating the nodes of interest over the target object to form a bunch graph. Three annotation techniques, manual, semi-automatic, and automatic annotation are used to determine the position of the nodes. The scheme and the annotation approaches are applied to explore the hand gesture recognition performance. A number of filter banks are applied to hand gestures images to investigate the effect of using different feature representation approaches. Experimental results show that the hierarchical elastic graph matching (HEGM) approach classified the hand posture with a gesture recognition accuracy of 99.85% when visual features were extracted by utilizing the Histogram of Oriented Gradient (HOG) representation. The results also provide the performance measures from the aspect of recognition accuracy to matching benefits, node positions correlation and consistency on three annotation approaches, showing that the semi-automatic annotation method is more efficient and accurate than the other two methods.     

Fast fingerprint identification for large databases

Fingerprint matching has emerged as an effective tool for human recognition due to the uniqueness, universality and invariability of fingerprints. Many different approaches have been proposed in the literature to determine faithfully if two fingerprint images belong to the same person. Among them, minutiae-based matchers highlight as the most relevant techniques because of their discriminative capabilities, providing precise results. However, performing a fingerprint identification over a large database can be an inefficient task due to the lack of scalability and high computing times of fingerprint matching algorithms.In this paper, we propose a distributed framework for fingerprint matching to tackle large databases in a reasonable time. It provides a general scheme for any kind of matcher, so that its precision is preserved and its time of response can be reduced.To test the proposed system, we conduct an extensive study that involves both synthetic and captured fingerprint databases, which have different characteristics, analyzing the performance of three well-known minutiae-based matchers within the designed framework. With the available hardware resources, our distributed model is able to address up to 400 000 fingerprints in approximately half a second. Additional details are provided at http://sci2s.ugr.es/ParallelMatching.     

k-NN classification of handwritten characters via accelerated GAT correlation

This paper addresses the problem of reinforcing the ability of the k-NN classification of handwritten characters via distortion-tolerant template matching techniques with a limited quantity of data. We compare three kinds of matching techniques: the conventional simple correlation, the tangent distance, and the global affine transformation (GAT) correlation. Although the k-NN classification method is straightforward and powerful, it consumes a lot of time. Therefore, to reduce the computational cost of matching in k-NN classification, we propose accelerating the GAT correlation method by reformulating its computational model and adopting efficient lookup tables. Recognition experiments performed on the IPTP CDROM1B handwritten numerical database show that the matching techniques of the simple correlation, the tangent distance, and the accelerated GAT correlation achieved recognition rates of 97.07%, 97.50%, and 98.70%, respectively. The computation time ratios of the tangent distance and the accelerated GAT correlation to the simple correlation are 26.3 and 36.5 to 1.0, respectively.     

Dielectric loss and phase transition of sodium potassium niobate ceramic investigated by impedance spectroscopy

The dielectric permittivity of Na_0.80K_0.20NbO₃ ceramic was investigated by impedance spectroscopy. The dielectric characterization was performed from room temperature to 800 °C, in the frequency range 5 Hz–13 MHz. The bulk permittivity was derived by the variation of the imaginary part of the impedance as a function of reciprocal angular frequency. The permittivity values as a function of temperature showed two maxima. The first maximum is very similar at 200 °C and the second one positioned at around 400 °C, which was associated to Curie’s temperature. The evolution of the complex permittivity as a function of frequency and temperature was investigated. At low frequency dispersion was investigated in terms of dielectric loss. The Na_0.80K_0.20NbO₃ showed a dissipation factor between 5 and 40 over a frequency range from 1 to 10² kHz.