重碳掺杂p型GaAsSb的GSMBE生长及其特性

以四溴化碳(CBr4)作为碳掺杂源,采用气态源分子束外延(GSMBE)技术生长了InP衬底上晶格匹配的重碳掺杂p型GaAsSb材料.通过改变CBr4压力,研究了掺杂浓度在(1～20)×1019cm-3范围内的掺杂特性,得到的最大掺杂浓度为2.025×1020cm-3,相应的空穴迁移率为20.4cm2/(V·s).研究了不同生长温度对掺碳GaAsSb外延层组分、晶格质量和表面粗糙度的影响,结果表明480℃是生长优良晶格质量的最优温度.     

Ultra high-speed InP/InGaAs SHBTs with ft and fmax of 185 GHz

An InP/InGaAs single heterojunction bipolar transistor(SHBT) with high maximum oscillation frequency (f_(max)) and high cutoff frequency(f_t) is reported.Efforts have been made to maximize f_(max) and f_t simultaneously including optimizing the epitaxial structure,base-collector mesa over-etching and base surface preparation.The measured f_t and f_(max) both reached 185 GHz with an emitter size of 1×20μm~2,which is the highest f_(max) for SHBTs in mainland China.The device is suitable for ultra-high spee...     

High breakdown voltage InGaAs/InP double heterojunction bipolar transistors with fmax=256 GHz and BVCEO= 8.3 V

正An InGaAs/InP DHBT with an InGaAsP composite collector is designed and fabricated using triple mesa structural and planarization technology.All processes are on 3-inch wafers.The DHBT with an emitter area of 1 x 15μm~2 exhibits a current cutoff frequency f_t = 170 GHz and a maximum oscillation frequency f_(max) = 256 GHz.The breakdown voltage is 8.3 V,which is to our knowledge the highest BV_(CEO) ever reported for InGaAs/InP DHBTs in China with comparable high frequency performances.The high speed InGaAs/InP DHBTs with high breakdown voltage are promising for voltage-controlled oscillator and mixer applications at W band or even higher frequencies.     

Si/InP键合界面的研究

应用疏水处理方法成功实现了Si/InP的键合,然后通过对InP和Si的表面XPS能谱分析得到界面信息,从而了解键合机理.I-V曲线也反应了键合界面的性质,通过450、550℃退火样品的伏安特性可知道,对于InP/Si键合结构而言,退火温度与界面特性应该存在最佳值.     

发射极δ掺杂的InGaAs/InPDHBT的特性分析

设计了一种新结构的InGaAs/InP双异质结晶体管(DHBT),其中发射结采用δ掺杂和阻挡层结构,集电极采用N+掺杂复合结结构.考虑隧穿作用和发射结空间电荷区复合电流的影响,计算了δ掺杂浓度和N+、n-层厚度等参数变化对InGaAs/InP DHBT电流、I-V输出特性、电流增益的影响,计算结果表明,随着这些参数值增大,InGaAs/InP DHBT输出特性逐渐改善.当δ掺杂浓度大于2×1012cm-3时,电流增益趋于饱和.     

Ⅲ-Ⅴ族半导体化合物快速热退火扩Zn方法研究

以GaAs和InP材料为例,对化合物半导体材料中的快速热退火扩Zn可行性进行比较分析,研究表明,化合物半导体材料中快速热退火扩Zn可行性与化合物半导体材料的分解温度有着密切关系。化合物半导体材料分解温度越低,对扩散源、帽层和阻挡层要求越高。针对InP材料高于360℃就分解、低温Zn扩散困难的特点,提出了直接溅射Zn层在410℃低温扩散的方法。对InP快速热退火扩散结果进行分析,初步分析表明其掺杂机理是形成合金结。     

Sub‐Micron Anisotropic InP‐based III–V Semiconductor Material Deep Etching for On‐Chip Laser Photonics Devices

Two InP‐based III–V semiconductor etching recipes are presented for fabrication of on‐chip laser photonic devices. Using inductively coupled plasma system with a methane free gas chemistry of chlorine and nitrogen at a high substrate temperature of 250 °C, high aspect ratio, anisotropic InP‐based nano‐structures are etched. Scanning electron microscopy images show vertical sidewall profile of 90° ± 3°, with aspect ratio as high as 10. Atomic Force microscopy measures a smooth sidewall roughness root‐mean‐square of 2.60 nm over a 3 × 3 μm scan area. The smallest feature size etched in this work is a nano‐ring with inner diameter of 240 nm. The etching recipe and critical factors such as chamber pressure and the carrier plate effect are discussed. The second recipe is of low temperature (?10 °C) using Cl₂ and BCl₃ chemistry. This recipe is useful for etching large areas of III–V to reveal the underlying substrate. The availability of these two recipes has created a flexible III–V etching platform for fabrication of on‐chip laser photonic devices. As an application example, anisotropic InP‐based waveguides of 3 μm width are fabricated using the Cl₂ and N₂ etch recipe and waveguide loss of 4.5 dB mm^?1 is obtained.

     

InGaAsP/InP双异质结发光管中的深能级

本文用DLTS谱仪研究了SiO2限制的InGaAsP/InP双异质结发光管中的深能级。结果表明:只有在p-n结位于p-InP/n-InGaAsP界面处的个别器件中,有△E=0.24eV的多子陷阱。     

国外InP HEMT和InP HBT的发展现状及应用

在毫米波段,InP基器件由于其具有高频、高功率、低噪声及抗辐射等特点,成为人们的首选,尤其适用于空间应用.InP HEMT和InP HBT已在卫星、雷达等军事应用中表现出了优异的性能.分别介绍了InP HEMT和InP HBT器件及电路的发展现状,现在能达到的最高性能及主要生产公司等,其中InP HEMT又分别按低噪声和功率进行了详细介绍.介绍了它们在军事上的主要应用,以具体的应用实例介绍了在卫星相控阵雷达系统天线中的T/R模块中、航天器和地面站的接收机中、以及雷达和通信系统中的应用情况、达到的性能及可靠性等.并根据国外InP器件和电路的发展现状总结了其未来发展趋势.     

85 MeV19F离子辐照InP正电子湮没研究

用正电子湮没寿命技术研究了注量为１．６＊１０＾１６ＣＭ＾－２Ｒ ８５ＭｅＶ＾１９Ｆ离子辐照ＩｎＰ产生的辐照效应。实验表明辐照在ＩｎＰ中产生单空位型缺陷。