影响水库中酸碱度变化因素的研究

通过监测数据分析,辽阳市境内所属两座水库在2006年均出现了pH值大于8.50的现象,经过实验及现场调查,发现其主要原因是水库两岸的有机质及腐殖质的分化对水库中水质中酸碱度产生了影响。     

Fundamentals of systems ergonomics/human factors

Ergonomics/human factors is, above anything else, a systems discipline and profession, applying a systems philosophy and systems approaches. Many things are labelled as system in today's world, and this paper specifies just what attributes and notions define ergonomics/human factors in systems terms. These are obviously a systems focus, but also concern for context, acknowledgement of interactions and complexity, a holistic approach, recognition of emergence and embedding of the professional effort involved within organization system. These six notions are illustrated with examples from a large body of work on rail human factors.     

Effects of personal,psychosocial and occupational factors on low back pain severity in workers

Low back pain (LBP) remains the most common work-related musculoskeletal disorder (WMSD). While most of the LBP research has focused on occupational risk factors, other underlying causal mechanisms may exist since not all workers performing the same task develop an injury. Previous research has identified three primary risk factor categories for LBP (occupational, personal and psychosocial factors); however, few studies have investigated the impact of cross categorical risk factor interactions on LBP. The objective of this study was to investigate the effects of occupational, personal and psychosocial factors, and their interactions, on LBP severity in a population of workers currently suffering from LBP. Sixty LBP patients recruited for the study through local physicians and local announcements, completed questionnaires relating to identified occupational, personal and psychosocial risk factors, and completed an Oswestry Disability Index (ODI). Multiple regression models for predicting LBP severity were developed for each risk factor category and for a combined risk factor model (which included factors from all three risk factor categories) that included two-way interactions. Results showed that the final model consisted of both main effects and interaction terms between risk factor categories and had an adjusted R² value of 0.85, a significant improvement over models developed for the individual categories. These findings illustrate the need to consider all three broad categories of risk factors simultaneously in predicting injury status and in developing effective potential intervention efforts.     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.     

工艺因素影响焦炭颗粒耐压强度的试验研究

焦炭颗粒的耐压强度一直是焦炭颗粒最重要的性质之一。利用最近提出的表征焦炭颗粒耐压强度的新方法，就模压压力、加压方式、粒度组成范围、粒度大小、粒度配比等因素对单粒度或多粒度组成焦炭颗粒耐压 强度的影响进行了较为详细的试验研究。结果表明：（1）焦炭颗粒的粒度大小和粒度范围均可用其原始平均细度来表征。焦炭颗粒的原始平均细度越大，其耐压强度系数也就越高；（2）多粒度组成焦炭颗粒混合料的耐压能力比单粒度组成混合料的耐压能力要高得多。对多粒度组成焦炭颗粒而言，模压压力及粒度组成配比对其耐压强度系数的影响不甚明显；（3）分阶段缓慢加压到位比一次快速加压到位有利于提高焦炭颗粒的耐压强度系数。     

尿素设备腐蚀的影响因素及防腐措施

从温度、氨碳比、水碳比、甲铵液浓度、氧含量、硫含量、氯离子含量、介质流速等方面论述了尿素设备腐蚀的影响因素;提出了在正常生产和停车封塔情况下的防腐控制措施。     

原位合成莫来石晶须及其微观结构的研究

本文通过以高岭土、工业氢氧化铝为原料,添加适量AlF3和V2O5,在高温下原位合成了莫来石晶须,采用扫描电镜（SEM）研究了合成的莫来石晶须的微观形貌,探讨了莫来石晶须的生长机理,并讨论了影响莫来石晶须生长的相关因素.在综合考虑影响莫来石晶须生长的相关因素后,制备出晶须多、长径比大、分布均匀的莫来石晶须样品.     

基于阿基米德螺线的磨盘挤出机数学模拟

介绍了阿基米德螺线磨盘挤出机的数学模拟,建立了磨盘的物理模型和数学模型,并给出了流场的速度分布和压力分布。采用CAD/CAM/CAE技术研究了磨盘转速及其槽深和槽宽对压力分布和剪切速率分布的影响。     

A model of ammonia volatilisation from a dairy farm: an examination of abatement strategies

A model (MAST) to calculate the mass flow of NH₃ through amodel dairy farm has been developed. Updated emission factors for UKagriculturewere used to examine different abatement strategies available for a typicaldairy farm. A range of annual NH₃ emissions was calculated for bothslurry and FYM based dairy systems. Emission for the slurry based system ranged between 27 kg NH₃-N ha^–1 yr^–1, achieved using a combination of abatementstrategies, and 107 kg NH₃-N ha^–1 yr^–1, calculated for a worst casescenario. For FYM, this range was between 33 and 86 kg NH₃-Nha^–1 yr^–1. The greatest reductionswereachieved by manipulating options linked to fertiliser usage and manureapplication.     

影响固态发酵速率的因素及其动力学

论述了固态发酵过程中基质的形态特性、基质含水量、通气速率与气体组成、发酵温度诸因素对发酵速率的影响；探讨了固态发酵过程动力学模型及其特征。