大体积混凝土温升与强度增长的试验研究

针对大体积混凝土结构构件实体强度与普通标准养护试块强度发展规律间的差别等问题,通过研究实际工程尺寸试件温度场的分布和实验室混凝土变温养护试验,以不同养护制度下的试块强度得出了大体积混凝土结构实体强度的发展规律,为工程施工提供了依据,成功地解决了工期与质量的矛盾,取得了较好的技术经济效果.     

合体女裤提臀结构设计的探讨

首先用问卷调查的方式得到人们对合体裤提臀的要求,主要表现在臀突感、臀下以及臀后与人体的贴合度上;其后对6款样裤进行了拓版,得到影响提臀效果的结构设计参数.在此基础上用实验法得出结果:在合体裤制版参数常用取值范围内,总裆宽越小,后上裆倾斜角越大,前后裆宽比越小,裤子的提臀效果越好;通过美观性与舒适性的评价,得出兼顾两者的参数配置.     

Computation of concentrations of characteristic atoms of alloys in BCC structure

In this paper,taking Nb-Mo alloy system as an example,the equations of concentration of characteristic atoms of alloys in BCC structure were obtained on the basis of the idea of systematic science of alloys and the number of coordination atoms.The concentrations of characteristic atoms in B2-NbMo type ordered alloys were calculated as functions of ordering degree(s) and composition xMo.When s=smax,the concentrations of characteristic atoms of stoichiometric B2-NbMo intermetallic compound are equal to that o...     

A macro-meso constitutive law for concrete having imperfect interface and nonlinear matrix

The overall behavior of concrete depends on its meso structures such as aggregate shape, interface status, and mortar matrix property. The two key meso structure characters of concrete, bond status of interface and nonlinear property of matrix, are considered in focus. The variational structure principle is adopted to establish the macro-meso constitutive law of concrete. Specially, a linear reference composite material is selected to make its effective behavior approach the nonlinear overall behavior of concrete. And the overall property of linear reference composite can be estimated by classical estimation method such as self-consistent estimates method and Mori-Tanaka method. This variational structure method involves an optimum problem ultimately. Finally, the macro-meso constitutive law of concrete is established by optimizing the shear modulus of matrix of the linear reference composite. By analyzing the constitutive relation of concrete established, we find that the brittleness of concrete stems from the imperfect interface and the shear dilation property of concrete comes from the micro holes contained in concrete. Supported by the National Natural Science Foundation of China (Grant Nos. 50679022, 90510017, 50539090) and National Basic Research Program of China (Grant No. 2007CB714104)     

Characterization of konjac glucomannan–quaternized poly(4‐vinyl‐N‐butyl) pyridine blend films and their preservation effect

Novel polymer blends were prepared from a mixture of 2 wt % konjac glucomannan and 4 wt % quaternized poly(4‐vinyl‐N‐butyl) pyridine (QPVP) in aqueous solution and dried at room temperature for 72 h. Their structure and properties were studied by infrared, wide‐angle X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. Thermal stability in the dry state was reduced with increasing content of QPVP. Compared with QPVP film, the tensile strength of the films was improved in the dry state. The maximum value of 12.74% tensile break elongation was reached when the content of QPVP was 30%. Structural analysis indicated that clear phase separation was observed when the content of QPVP was only 50%. Results from the filmcoating preservation experiments with lychee showed that this blend film had water‐holding ability. The fruit weight loss rate and rot rate both decreased in various degrees. The potential uses of these novel polymer films could be as preservative films. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1868–1875, 2004     

纳米管合成研究进展

当今纳米科学技术飞速发展，其中纳米管已构成了纳米材料的一个非常重要的类别。本文介绍近几年来由化学键结合的纳米管以及由分子间力形成的一些纳米或具有中观尺度的管状结构材料的合成研究进展。     

水滴形歧管的结构分析

本文就衣架式模头水滴形歧管的结构设计，根据聚合物加工的流变理论，结合生产实际对水滴形截面的歧管流道分配系统进行分析，使得所设计的挤塑模在尽可能高的流速下，生产出符合尺寸及形状公差的均质片材。     

一种双U形缺陷地结构低通滤波器的设计

基于双U形缺陷地结构设计了一种低通滤波器。首先利用三维电磁场仿真软件分析了双U形DGS结构的S参数频响特性,然后利用该DGS结构加工制作了DGS结构低通滤波器,实验室测得该滤波器3 dB截止频率为3．26 GHz,通带范围内波纹最大是0．4 dB。插入损耗大于20 dB的阻带宽度为5．2 GHz。     

基于模型缩聚的θ指标损伤识别方法

为实现大型三维空间结构的损伤检测,提出了一种基于模型缩聚技术的检测方法。该方法利用有限数量的加速度传感器,得到大型三维桁架结构的自振频率和模态振型,以完成损伤的识别。数值仿真结果表明：该方法在损伤的定位识别和定量识别上能达到预期的适用性和可靠性。     

Effects of parameters on rotational fine blanking of helical gear简

The application of fine blanking to the manufacturing of helical gears directly from a strip has been restricted due to the traditional linear cutting stroke of the punch and die. In this work, rotational fine blanking which combined the linear and rotational motion of punch and counterpunch was applied for the forming of helical gears. A three-dimensional （3D） rigid-plastic finite element model was developed on the DEFORM-3D platform. By finite element simulation and analysis, the influences of key parameters on the punch load and cut surface were investigated. It is shown that： 1） with increasing the counterforce or helical angle, the punch load and the depth of die roll increase; 2） with increasing blank holder force, the punch load increases while the depth of die roll decreases; 3） V-ring indenter facilitates an improvement in the quality. The results of this research reveal the deformation mechanism of rotational fine blanking of helical gears, and provide valuable guidelines for further experimental studies.