UWB技术及其在家庭网络中的应用

超宽带(Ultra Wideband,UWB)技术是近几年发展起来的一项十分有潜力的无线通信技术,正是由于其高性能,低成本的无线数据通信能力,成为实现无限个人局域网的富有竞争力的技术之一.家庭网络无线系统引入频谱利用率高效的UWB技术,可提供具有灵活性和移动性的宽带无线接入.文章依据超宽带技术的主要原理和特点,讨论了该技术在家庭网络中应用的优势和实现,使得UWB技术具备了更广泛的应用.     

Electrochemical performance of a mechanochemically prepared submicron-sized crystalline Nd1.8Ce0.2CuO4±δ cathode for intermediate temperature solid oxide fuel cells

To produce a Nd_1.8Ce_0.2CuO_4±δ solid solution, the oxide form of the reagents were milled for 36 h and sintered at 1173 K for 8 h in a microwave furnace. The transition from a negative temperature coefficient (NTC) of conductivity to a positive temperature coefficient (PTC) was suppressed due to the submicron size of the crystallites. The low-frequency response in the complex impedance plane fit the Gerischer element. At 973 K, the area specific resistance (ASR) of Nd_1.8Ce_0.2CuO_4±δ/GDC/Nd_1.8Ce_0.2CuO_4±δ sintered at 1073 K for 2 h was 1.92 ohm cm².     

Localized shear deformation during shear band propagation in titanium considering interactions among microstructures

Closed-form analytical solutions of plastic shear strain and relative plastic shear displacement during shear band propagation are proposed under dynamic loadings based on gradient-dependent plasticity considering the effect of microstructures due to heterogeneous texture of Ti. According to the differences in shear stress levels, Ti specimen is divided into three regions: residual region, strain-softening region and elastic region. Well-developed shear band is formed in the residual region and the relative plastic shear displacement no longer increases. In the normal and tangential directions, the plastic strain and the displacement are nonuniform in the strain-softening region.At the tip of shear band, the shear stress acting on the band is increased to shear strength from the elastic state and the shear localization just occurs. Prior to the tip, Ti remains elastic. At higher strain rates, the extent of plastic strain concentration is greater than that under static loading. Higher strain rate increases the relative plastic shear displacement. The present analytical solution for evolution or propagation of shear localization under nonuniform shear stress can better reproduce the observed localized characteristics for many kinds of ductile metals.     

a-C:F:H films prepared by PECVD

Fluorinated amorphous hydrogenated a-C:F:H carbon thin films were deposited using radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) reactor with CF4 and CH4 as source gases and were annealed in a N2 atmosphere. The properties of these films were evaluated by FTIR spectrometry, UV-VIS spectrophotometry and single-wavelength spectroscopic ellipsometry. A correspondence relativity connection between the deposition rate and technology was found. The chemical bonding structures and the content of CHx and CFx in the films are transformed and the optical band gap decreases monotonically with increasing temperature after annealing.The dielectric constant is increased with decreasing content of F in the films and the optical band gap is decreased with decreasing the content of H in the film.     

20CrMo棒材带状组织的控制研究

通过Gleeble-1500热模拟机对20CrMo轧材精轧阶段轧制过程及冷却过程的模拟,研究了终轧温度、冷却速度对室温组织的影响,分析了形成带状组织的条件,最终得出了理想室温组织的终轧温度和冷却速度。     

不同应力状态下铝合金变形及损伤机理的研究

利用改装的Arcan夹具对铝合金（6063）的蝶形试样进行0°，30°，45°，60°，90°的拉伸及拉伸卸载试验，研究了铝合金在不同应力状态下变形及损伤机理。结果表明：铝合金在不同应力状态下的工程应力一应变曲线明显不同。0°加载时，在蝶形中心产生微孔洞，微孔洞之间剪切，从而产生了微裂纹。随着微裂纹的扩展、连接导致试样断裂。随着试样中三轴应力度的减小，在蝶形试样中心的剪切应力不断增大，同时在蝶形试样中的剪切变形带越来越集中。显微裂纹首先在剪切带中产生，随着微裂纹的扩展导致试样的断裂。90°拉伸时，在蝶形中心形成明显的剪切变形带。90°加载时，在试样中产生的剪切带是形变剪切带而非相变剪切带。利用有限元软件ABAQUS对不同角度拉伸试验进行模拟，从而得出了不同应力状态下的塑性区的形状和大小。     

Possible role of two iron sites in the metamagnetic transition observed in LaFe12 B6

Fixed spin moment calculations within TB-LMTO-ASA method using LSDA were performed for the compound LaFe₁₂ B₆ and for lattice constants taken from experimental data. Minima corresponding to the observed low moment and high moment states were found. However, their relative stability is not in agreement with experimental data. Fixed spin moment calculations on model compounds where Fe atoms at either crystallographic sites were replaced by Cu atoms were also performed. It was found that the stability of magnetic moment of Fe atoms at 18(h) site is much more dependent on environment than the stability of magnetic moment of Fe atoms at the 18(g) site.     

Hydrolysis of human horny cells by alkaline protease: Morphological observation of the process

The interaction of highly purified alkaline protease fromBacillus sp. KSM-K16 with the horny cells of human skin contained in skin grime was directly visualized by electron microscopy. It became clear that the protease first penetrates the horny cells and then adsorbs, mainly onto the internal structure of the cells at the initial stage of hydrolysis, and directly hydrolyzes the keratin filaments, though the marginal band surrounding them retains its original shape. Then, hydrolysate produced from the keratin filaments flows out of the cell, and early in the hydrolysis process keratin filaments decrease and then disappear, leaving a marginal band, i.e., the cell turns to a hollow state. As a result, the remaining marginal band loses support from inside the cell, thus promoting cleavage and dispersion. Until this stage in the protease reaction, the remarkable liberation of hydrolysis products as water-soluble protein does not occur.     

爆炸焊接TA2/316L复合板界面的微观分析

采用扫描电镜、能谱仪和显微硬度计，对爆炸焊接316L／TA2复合板结合界面的显微组织，成分和显微硬度进行了研究。结果表明，界面呈波状；316L与TA2结合界面之间有一层约为5μm的熔化层：波尾处存在漩涡状熔化块，熔化块内有微裂纹和气孔；界面附近的基体组织产生了剧烈的塑性变形；钛一侧存在绝热剪切带；界面附近的原子存在扩散现象；界面区的显微硬度有显著的提高。     

Deformation behavior ofAZ31 magnesium alloy at different strain rates and temperatures

The deformation behavior of AZ31 was examined by compression and tension testes over a wide strain rate and temperature range, strain rate from 10^-3 to 10^3 s^-1, temperature from 300 to 623 K. Analysis of flow behavior and microstructural observations indicate that in tension tests dislocation glide is the most important deformation mechanism in the test strain rate and temperature range, while in compression tests twinning deformation mechanism is important at lower temperature when the strain rate ranges from 10^-3 to 10 s^-1. At 10^3 s^-1 strain rate, dislocation glide and twinning are present at the same time. At the strain rate of 2 964 s^-1, adiabatic shear band can be found easily, even at the strain rate of 1 537 s^-1 adiabatic shear localization zone can be found. In adiabatic shear localization zone, there are fine recrystallization grains. But in adiabatic shear band, the grains cannot be identified by optical microscopy.