厚积薄发 20款新品闪耀波导

进入2005年，手机产业的发展日新月异，新技术、新应用层出不穷。各路厂商为了在市场上抢得先机，纷纷推出让人眼花缭乱的新产品。6月7日，国产手机领军品牌波导发动了夏季的新一轮攻势。一举推出了20款新品。其中不乏亮点之作。     

Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

Analysis and Simulation of S-shaped Waveguide in Silicon-on-insulator

The simulation and analysis of S-shaped waveguide bend are presented.Bend radius larger than 30 mm assures less than 0.5 dB radiation loss for a 4-μm-wide silicon-on-insulator waveguide bend with 2-μm etch depth.Intersection angle greater than 20° provides negligible crosstalk (<-30 dB) and very low insertion loss.Any reduction in bend radius and intersection angle is at the cost of the degradation of characteristics of bent waveguide and intersecting waveguide, respectively.     

正交双频光栅CCD系统剪切干涉测量二维温度场

以半导体激光器为光源，利用正交双频光栅（ＯＤＦＧ）ＣＣＤ系统剪切干涉对带平板边界的半圆柱体热源的二维温度场进行实时诊断，分析剪切干涉图时，用柱函数系作为拟合基底，给出二维自然对流温度场的定量分布。     

波导短程透镜球差特性分析及其焦距精确测量方法的研究

本文研究短程透镜的焦点位于端面外的球差特性。对焦点位于波导外部（包括端面）的情况给出了一种精确测量焦距新方法，采用这种方法简单易行，测量精度取决于读数显微镜的读数精度（０．０１ｍｍ）。     

强折射轴对称流场的干涉再现方法

利用光学方法测量气体状态参数的关键在于确定气体折射率场的变化。光线通过稳定的非均匀折射率场时发生偏折，并且在强折射对称场中会产生交叉，使得条纹位移量的判读困难。本文首先分析了光线在轴对称折射率场中的偏折效应，在此基础上，给出了一种利用成像透镜对强折射轴对称场中折射率的干涉再现方法。该方法与其它方法相比较能够精确地确定折射率ｎ（ｒ）的值。     

一种用莫尔技术测量分光板夹角的简易方法

介绍了一种将剪切干涉和莫尔技术结合起来测量分光板夹角的新方法，该方法简单可靠，准确度较高。     

溶液扩散系数自动测量系统

结合实时法全息干涉计量和数字图象处理技术，提出了一种溶液扩散系数的自动测量系统。在干涉图的处理中，采用了相位检测和曲线拟合技术，得到了亚象素的测量精度。