镍基高温合金定向凝固过程中MC型碳化物的分形分析

利用分形物理分析的方法定量地描述了定向凝固过程中MC型碳化物的生长形态发现随着凝固速率的增加,MC由宽大的枝叶状演化为三级分支的枝簇状,其信息维数随凝固速率呈指数规律上升,并结合非平衡热力学分析了在改变外界控制参数时MC型碳化物形态变化的物理机制     

LS-SVM and Monte Carlo methods based reliability analysis for settlement of soft clayey foundation

A method which adopts the combination of least squares support vector machine (LS-SVM) and Monte Carlo (MC) simulation is used to calculate the foundation settlement reliability. When using LS-SVM, choosing the training dataset and the values for LS-SVM parameters is the key. In a representative sense, the orthogonal experimental design with four factors and five levels is used to choose the inputs of the training dataset, and the outputs are calculated by using fast Lagrangian analysis continua (FLAC). The decimal ant colony algorithm (DACA) is also used to determine the parameters. Calculation results show that the values of the two parameters, γ and δ² have great effect on the performance of LS-SVM. After the training of LS-SVM, the inputs are sampled according to the probabilistic distribution, and the outputs are predicted with the trained LS-SVM, thus the reliability analysis can be performed by the MC method. A program compiled by Matlab is employed to calculate its reliability. Results show that the method of combining LS-SVM and MC simulation is applicable to the reliability analysis of soft foundation settlement.     

淬火温度对冷轧辊用MC3钢组织与性能的影响

采用光学显微镜、扫描电镜、X射线衍射仪、洛氏硬度计和HT-1000高温摩擦磨损试验机等研究了不同淬火温度对冷轧辊用MC3钢组织、硬度和摩擦性能的影响.结果 表明:淬火后,冷轧辊用MC3钢基体组织由铁素体向隐针状马氏体转变,同时碳化物溶解并伴随有残留奥氏体的生成,当淬火温度超过920℃时,马氏体组织严重粗化,残留奥氏体体...     

基于MC68HC08系列单片机下汽车防盗器程序设计

文中具体介绍应用MC68HC08系列单片机的汽车防盗器的功能、硬件组成及原理,采用Protel软件画出电路图、汽车防盗器主程序流程图,并且编写了汽车防盗器汇编语言程序.     

Analysis of the atomic force microscopy vibration behavior using the Timoshenko theory by multi‐scale method in the air environment

This article deals with the modeling and simulation of the vibration behavior of piezoelectric micro‐cantilever (MC) based on the Timoshenko theory and using multi‐scale (MTS) method in the air environment. In this regard, the results are compared with the previous literature, such as the finite element method and the MTS method. The analysis of the piezoelectric MC vibrating behavior is investigated in a dynamical mode including non‐contact and tapping modes. The dynamics of this system is affected by interferential forces between probe tip and sample surface, such as van der Waals, capillary, and contact forces. According to the results, the forces applied to the probe tip reduce the amplitude and the resonance frequency. The simulation of surface topography in non‐contact mode and tapping for rectangular and wedge‐shaped roughness in the air environment are presented. Various experiments have been conducted in Ara research Company using the atomic force microscopy device in the amplitude mode. In the NSC15 Cantilever, the first natural frequency is derived from the results of the MC simulation based on Timoshenko beam theory, the practical results are 295.85 and 296.12 kHz, and the error rate is 0.09; at higher natural frequencies, the error rate has been increased. The γ _f coefficient is a measure of the nonlinear effects on the system; the effect of the piezoelectric length and width on γ _f coefficient is also investigated.     

阴离子开环原位聚合法制备MC尼龙/累托石复合材料

研究了己内酰胺在甲醇钠催化剂和异氰酸酯助催化剂的存在下,采用季铵盐改性累托石由阴离子开环原位聚合法制备MC尼龙/累托石复合材料的工艺,并讨论了各种反应条件的影响。结果表明,有机累托石改性MC尼龙复合材料的物理性能和力学性能优良,当加入的有机累托石质量分数为5%时,制品的收缩率下降,热变形温度提高27℃,制品具有填料分布均匀、外观光泽优良等优点;制品的冲击强度和拉伸强度都有所提高,其中拉伸强度提高4.9%,冲击强度提高56.8%。综合考虑添加5%的有机累托石改性MC尼龙的力学性能比较理想。     

GC/MC法分析哈尔滨风干肠香辛料中的挥发性成分

为了获取关于香辛料在哈尔滨风干肠中的应用资料,利用静态顶空进样法从哈尔滨市售两种知名品牌的风干肠香辛料（FX）中收集到挥发性香气成分,连接GC／MC装置进行分析,分别测得FX1中有20种化合物,FX2中有22种化合物,这些化合物均以烯烃类、醇类、醚类、醛类、酮类、酸类、脂类及芳香类有机化学物质为主,而此类化学物质也均属于食品化学中所介绍的香辛料的主要成分的范畴,本实验利用峰面积归一化法通过G170LBA化学工作站数据处理系统得出各化学成分在每个样品中的相对百分比。     

添加矿物型MC凝聚剂实现煤泥水深度澄清的实验室试验

重点介绍矿物型MC凝聚剂和阴离子型聚丙烯酰胺絮凝剂联合添加促进煤泥水澄清的实验室试验过程及相关分析,试验的特点是用分光光度计和电导率仪进行模拟性试验。试验结果表明,采用MC凝聚剂能高效获得极为清净的澄清水。     

六甲基磷酰三胺增韧改性MC尼龙

介绍在己内酰胺阴离子催化聚合反应中，添加六甲基磷酰三胺作增韧改性剂制备改性ＭＣ尼龙。用ＤＳＣ法研究了增韧改性ＭＣ尼龙的热性能，结果表明，随着六甲基磷酰三胺组分的增加，ＭＣ尼龙的熔融温度、熔融热焓、结晶度等均降低，材料力学性能变化的趋向与传热性能变化相吻合。     

阻燃MC尼龙的研制

通过分析，考察数种阻燃剂对ＭＣ尼龙聚合的影响，总结了ＭＣ尼龙用阻燃剂的特点，筛选出三种适用性较强的阻燃剂，并对其阻燃效果进行了测试和分析。