基于Pro／E参数化斜齿轮建模技术

应用Pro／E软件的参数化造型功能，不需要二次开发，直接创建渐开线斜齿圆柱齿轮模型，对直齿、人字齿齿轮的建模具有借鉴作用。     

用KOH提取重组大肠杆菌中的PHA

用碱消化法从重组大肠杆菌中提取了PHA. 研究了碱液浓度、温度、消化时间及消化过程液固比等参数对产品PHA质量的影响. 提出了二段消化工艺,提高了PHA的产品纯度,所得PHA产品纯度为98.3%,同时较大幅度地降低了PHA的提取成本.     

Parameter Estimation for Periodically Stationary Time Series

Abstract. The innovations algorithm can be used to obtain parameter estimates for periodically stationary time series models. In this paper, we compute the asymptotic distribution for these estimates in the case, where the innovations have a finite fourth moment. These asymptotic results are useful to determine which model parameters are significant. In the process, we also develop asymptotics for the Yule–Walker estimates.     

耐药大肠杆菌的致病性与免疫原性

目的了解大肠杆菌耐药株的致病性与免疫原性。方法临床分离耐药大肠杆菌,经适宜条件培养后接种小鼠,观察耐药菌株对小鼠的致病性;并选择已知血清型的不同耐药谱和不同耐药水平的菌,分别培养至对数生长期,经甲醛灭活后免疫小鼠,2周后分别用致死剂量的原菌株和同期分离菌株进行攻毒,考察耐药菌株免疫原性。结果24株耐药菌普通肉汤培养物分别感染小鼠,在接种后18h,存活率仅为4%。只有2株菌在1周内仍不能将小鼠全部致死,经小鼠体内传3代后,可在18h内致死小鼠。耐药谱广的菌株感染的小鼠,心肌发生颗粒变性、局灶性出血、坏死;肝脏糖元溶解,脂肪变性;脾脏轻度淤血,淋巴细胞减少;肾脏出血,肾小球肾炎,上皮细胞颗粒变性,水泡变性。而耐药种类少的菌株与对照敏感菌株感染的小鼠主要特征为脾脏出血、淤血,坏死,脾小体消失;肠上皮细胞坏死、脱落、卡他性肠炎。免疫小鼠以免疫用菌株攻毒,均可得较高的保护率,最低为75%,最高为100%。免疫小鼠用非免疫菌株攻毒,小鼠感染后症状出现较缓慢,在18h后出现死亡高峰。耐药种类少的菌株免疫小鼠,对同期分离的非免疫用的致病性大肠杆菌攻击的保护率偏低,而对受试的11种抗生素耐受7种以上的菌株免疫小鼠后,对致病大肠杆菌攻击的保护率显著提高,多数达到75%以上,经统计学分析差异显著。结论耐药大肠杆菌具有较强致病性,且耐药特性与其免疫保护效果相关,多重耐药株对当前流行菌株具有更好的免疫保护作用。     

Phenol adsorption on porous and non-porous carbons

Phenol physisorption on a series of porous and non-porous amorphous carbons was studied at 298 K. Grand Canonical Monte Carlo computer simulations were performed to simulate phenol adsorption from the gas phase. Phenol is adsorbed in a solid-like state within the pores and there is no well-developed multilayer regime. The ‘t’ plot method was adapted to phenol adsorption and the results obtained are in agreement with the model solids employed. The simulated adsorption isotherms were compared with experimental results obtained for adsorption from aqueous solutions of phenol. BET surface areas were calculated. Other characteristics of the adsorption system analyzed were: adsorption energy distribution functions, density profiles, distribution of molecules according to gas-solid energy, and local isotherms.     

基于AD7884的分离脱落电连接器机械分离力测试台的设计

基于分级型模数转换器AD7884对分离脱落电连接器的分离力进行测量,采用8位单片机W77E58与之接口,进行数据处理并通过485串口传输到上位机。实现了对分离脱落电连接器的分离力进行测量,系统运行稳定,且与上位机数据交互简单、可靠。     

四种金属离子亲和层析纯化重组戊型肝炎病毒包涵体的效果比较

目的 选择固相金属亲和层析柱的金属离子,以优化分离纯化重组戊型肝炎病毒包涵体的条件。方法 在同一试验条件下用4种金属离子柱分离纯化目的蛋白。结果 包涵体经不同离子柱层析时目的蛋白的收获率、纯度、洗脱条件各异。结论 镍离子柱纯化效果最佳。     

胸腺素α1的基因合成、表达及活性测定

目的　合成胸腺素α1(Tα1)基因并在原核细胞中表达。方法　用半酶半化学合成并克隆Tα1基因 ,将该基因插入表达质粒pGEX 4T 1并在大肠杆菌进行表达 ,对表达的融合蛋白GST Tα1利用亲和层析法纯化 ,再经Thrombin酶切后 ,获得重组Tα1进行生物学活性检测。结果　经测序证实合成的Tα1序列与设计的一致。构建的重组表达载体pGEX 4T 1 Tα1在大肠杆菌中得到高效表达。E玫瑰花结形成试验证明重组Tα1具有生物学活性。结论　合成的Tα1基因在大肠杆菌中表达出具有生物活性的蛋白。     

幽门螺杆菌过氧化氢酶基因克隆及表达

目的 克隆幽门螺杆菌(Helicobacter pylori,HP)过氧化氢酶(katA)基因并在大肠杆菌中进行表达。方法 采用PCR扩增幽门螺杆菌katA全长基因,将其克隆入pET-11c载体中,经测序证实后,在大肠杆菌中进行表达,产物用Western blot检测其抗原性并进行N末端氨基酸的测序。结果 幽门螺杆菌katA基因全长1 518bp,编码氨基酸505个。在BL21(DE3)中的表达量约占细菌总蛋白的24.9％,表达产物经SDS-PAGE显示其相对分子质量与软件预测结果 58 000相符,N末端5个氨基酸测序结果与Hp中天然的katA完全一致,经Western blot检测可被 Hp全菌抗血清识别。结论 katA能在大肠杆菌中进行高效表达,具有良好的免疫反应性,可望为研究 Hp的致病机理、实验诊断及亚单位疫苗等提供充足的katA原材料。     

The prediction of crack growth in bonded joints under cyclic-fatigue loading I. Experimental studies

The performance of adhesively-bonded joints under monotonic and cyclic-fatigue loading has been investigated using a fracture-mechanics approach. The joints consisted of an epoxy film adhesive which was employed to bond aluminium-alloy substrates. The effects of undertaking cyclic-fatigue tests in (a) a ‘dry’ environment of 55% relative humidity at 23°C, and (b) a ‘wet’ environment of immersion in distilled water at 28°C were investigated. In particular, the influence of employing different surface pretreatments for the aluminium-alloy substrates was examined. In addition, single-lap joints were tested under cyclic fatigue loading in the two test environments, and a back-face strain technique has been used which revealed that crack propagation, rather than crack initiation, occupied the dominant proportion of the fatigue lifetime of the single-lap joints. In Part II, the data obtained in the present Part I paper will be employed to predict theoretically the lifetime of the adhesively-bonded single-lap joint specimens.