C/C复合材料Mo - Si-N系抗氧化涂层成分优化

以Mo粉和Si粉为原始粉末,采用熔浆法在C/C复合材料表面原位合成了Si3N4-MoSi2/Si-SiC(MSN)系多层抗氧化涂层,借助扫描电镜和X射线衍射仪等分析手段对涂层的相组成和微观组织进行表征,并对涂层的抗氧化性能进行了初步研究.结果表明:Si浆料中添加适量Al可有效地阻止液态Si渗入C/C基材内部,3%Al-Si涂层具有最好的阻止Si渗入作用;Al含量超过3%时,Si的渗入程度随Al含量的增加而加剧;涂层中MoSi2的理论含量超过50%时,MSN-C/C复合材料1 400℃的抗氧化性能随MoSi2含量的增加而显著下降;MSN30-C/C和MSN40-C/C复合材料均在1 200～1 400℃表现出相近的抗氧化能力,但只有MSN30-C/C复合材料表现出抗1 450℃氧化的能力.     

Analytical Model Development for Stokes-Type Settling in a Solidifying Fluid

Analytical modeling was used to track the mudline displacement of a simulated fluid dispersion that underwent a simulated linear increase in the fluid viscosity as a function of time following an induction period. Modeling results indicate two regimes of settling behavior from the driving force of density differences between the particles and the fluid. A linear mudline movement was first determined in the regime of constant viscosity, and a logarithmic retarded mudline movement was numerically determined following a linear rise in fluid viscosity. The results show that the combination of settling and solidification leads to a transitional mudline movement similar to batch settling curves described by early settling theories.     

Properties of Magnetic Nanoparticles about Doped Rare Earth and Its Composites

The magnetic liquid was prepared with ferric salt by inorganic gel technology. The effect of the doped rare earth elements on the properties of magnetic particles was analyzed. The magnetic liquid was composed with clay mineral into magnetic mineral composites. The crystal structure and micro-morphology of the nanoparticles were studied by XRD and TEM. The results show that the crystal structure of the magnetic particles doped 0.5 % of lanthanum is more complete, and the magnetic response capability is higher with doping agent. At the same time, the possibility of the clay mineral magnetic composites as the carrier of target drug was probed.     

用聚合矿物复合材料制造铣床夹具

经过分析和反复试验,确定了聚合矿物复合（ Ｐ Ｍ Ｃ）材料制造铣床夹具脱模剂,设计了所用浇铸模具、夹具中的预埋件在大量反复试验的基础上,确定了实用的 Ｐ Ｍ Ｃ制造机床夹具的完整工艺过程     

Study on characteristics of Ni-W-B composites containing CeO2 nano-particles prepared by pulse electrodeposition

Ni-W-B composites containing CeO2 nano-particles on the surface of 45 steel were prepared by pulse electrodeposition,and the in-fluence of pulse frequency,pulse duty circle and heat treatment temperature on the structures and properties were investigated.The results in-dicated that the pulse co-deposition of Ni,W,B and CeO2 nano-particles led to Ni-W-B/CeO2 composites possessing higher microhardness and better wear resistance when heat-treated at 400 oC for 1 h.The microhardness of 636 HV and the deposition rate of 0.0281 mm/h of the as-deposited alloy were the highest at pulse frequency of 1000 Hz,pulse duty circle of 10% and pulse average current density of 10 A/dm2.The composites were mainly in the amorphous state and were partially crystallized as-deposited,and the crystallization trend was strength-ened when heat-treated at 400 oC.Decreasing pulse duty cycle from 75% to 10% was favorable to the refinement in grain structures and im-provement of microstructures.The crystal sizes of the composites were smaller by means of pulse electrodeposition.     

颗粒弥散陶瓷的内应力分布及光弹性分析

本文详细分析了颗粒增强复相陶瓷内部的应力大小及分布状态，建立了单种颗粒及多种颗粒复合时瓷体的残余应力模型，并通过计算机模拟其应力的平面分布，采用光弹性应力分析加以验证．     

树脂浸渍补充增密对C/C复合材料摩擦磨损性能的影响

将CVD预增密至不同初始密度的C／C复合材料进行树脂浸渍／炭化补充增密至1.85g/cm^3，热处理后进行热物理性能的检测和不同刹车压力的摩擦磨损试验。结果表明，树脂浸渍／炭化是一种行之有效的快速致密化手段，所得制品的可石墨化性较好，导热性能也满足国外同类产品的要求；摩擦磨损试验和扫描电镜（SEM）观察结果表明，低一压力下形成的磨屑粒度明显大于高压下的磨屑，因而低压下的摩擦数高于高刹车压力下的摩擦系数。低压下的树脂炭对摩擦磨损的影响相对较大。