Numerical inversion of multidimensional Laplace transforms by the Laguerre method

Numerical transform inversion can be useful to solve stochastic models arising in the performance evaluation of telecommunications and computer systems. We contribute to this technique in this paper by extending our recently developed variant of the Laguerre method for numerically inverting Laplace transforms to multidimensional Laplace transforms. An important application of multidimensional inversion is to calculate time-dependent performance measures of stochastic systems. Key features of our new algorithm are: (1) an efficient FFT-based extension of our previously developed variant of the Fourierseries method to calculate the coefficients of the multidimensional Laguerre generating function, and (2) systematic methods for scaling to accelerate convergence of infinite series, using Wynn's ε-algorithm and exploiting geometric decay rates of Laguerre coefficients. These features greatly speed up the algorithm while controlling errors. We illustrate the effectiveness of our algorithm through numerical examples. For many problems, hundreds of function evaluations can be computed in just a few seconds.     

离子束溅射淀积光学薄膜的膜厚均匀性实验

介绍了离子束溅射技术改善薄膜均匀性的两种方法。研究了修正板技术,根据工程需要将修正板技术应用于行星转动条件下的光学薄膜的均匀性修正。分别研究了靶摆动和不摆动的情况下,淀积薄膜的均匀性修正。实验结果表明,修正后的均匀性结果优于 1%,能满足实际应用的要求;靶摆动修正的均匀性结果优于修正板技术。     

Structural and electrochemical properties of vanadium oxide thin films grown by d.c. and r.f. reactive sputtering at room temperature

Vanadium oxide thin films were grown at room temperature by direct current and radio-frequency reactive sputtering systems to compare the structural and electrochemical properties. Rutherford backscattering spectrometry and Fourier transform infrared measurements reveal that the composition of the as-deposited films consists of the V₂O₅ phase regardless of the deposition methods. Wide-angle X-ray diffraction measurements show that the crystallinity of the as-deposited V₂O₅ films is different depending on the deposition method. Films deposited by direct current reactive sputtering were amorphous, whereas films deposited by radio-frequency reactive sputtering were crystalline. Scanning electron microscopy measurements show that the V₂O₅ films grown by radio-frequency reactive sputtering had a large grain size but the films grown by direct current reactive sputtering were amorphous. Charge–discharge measurements taken at room temperature with a constant current clearly indicate that the films grown by direct current sputtering demonstrated typical amorphous behavior, whereas the V₂O₅ films grown by radio-frequency sputtering demonstrated the discharge behavior of crystalline V₂O₅. The origin of the structural and electrochemical properties of film grown by radio-frequency reactive sputtering is a self-bias effect. The self-bias effect induces ion bombardment during the growth of vanadium oxide thin film. These results suggest that direct current reactive sputtering is more desirable for growing amorphous V₂O₅ thin film than radio-frequency reactive sputtering.     

Cu(Ⅱ)-3,5-diCl-DMPAP-OP 显色反应及其应用研究

研究了在非离子表面活性剂ＯＰ存在下，２－（３，５－二氯－２－吡啶偶氮）－５－二甲氨基苯酚（３，５－ｄｉＣｌ－ＤＭＰＡＰ）与Ｃｕ（Ⅱ）的显色反应。实验表明，在ｐＨ７．５～１０．０的硼砂缓冲介质中，铜（Ⅱ）与试剂形成１∶２的稳定的红色配合物，其表观摩尔吸光系数ε５５８＝９．７×１０４Ｌ·ｍｏｌ－１·ｃｍ－１，铜浓度在０～６．５μｇ／１０ｍＬ范围内符合比尔定律。在柠檬酸三钠和二酮肟的存在下，可直接用于铝合金和纯铝中微量铜的测定，获得满意结果。     

机械合金化Cu－5Cr合金的组织性能研究

研究了机械合金化制粉、热静液挤压致密制备的Ｃｕ－５Ｃｒ合金的组织与性能。机械合金化Ｃｕ－５Ｃｒ合金由于细晶强化和弥散强化的作用，具有很高的强度（σｂ≥７５０ＭＰａ），经热处理后，合金具有较高的延伸率（δ≥８％）和导电性（≥６０％ＩＡＣＳ）。材料晶粒达到０．１μｍ级，析出的Ｃｒ粒子达到纳米级。     

Broadband MIMO Antenna System for 5G Operations in Mobile Phones

A broadband 8‐antenna multiple‐input and multiple‐output (MIMO) system working for 5G new radio N77 (3.3‐4.2 GHz) in mobile terminals is proposed. In particular, each antenna element/unit consists of a monopole‐type meandered branch and an inverted U‐shaped self‐isolated antenna branch; and the antenna unit is fed by the meandered branch. The antenna unit has two resonances generated separately by each branch of the antenna unit. Since the monopole couples strongly with the self‐isolated antenna element that has the inherent self‐isolation characteristics, quite good isolation for the broadband 8‐antenna MIMO system can be obtained. The results such as antenna efficiency, radiation patterns, envelope correlation coefficient, and channel capacity are also presented.     

电位滴定法测定重过磷酸钙中游离P2O5含量

介绍用电位滴定法测定重过磷酸钙中游离P2O5含量的方法。采用设定终点滴定,终点pH值为4.5,开始条件设置滴定前搅拌60s,最大滴定速度0.01mL/min,最小滴定速度0.005mL/min,终点前动态范围pH1.000,终点停止漂移0.02mL/min,测量点时间间隔2.0s,滴定方向选择pH值升高的方向,停止体积为成品重钙10.00mL、鲜钙20.00mL。该方法简便,快速,准确度、精密度高。     

多孔PZT95/5铁电陶瓷的机械性能和铁电性能研究

采用添加造孔剂的方法制备多孔锆钛酸铅(PZT95/5)铁电陶瓷, 研究了孔结构包括孔隙率、孔径及孔形状对多孔PZT95/5陶瓷机械性能和电性能的影响及机理, 并揭示多孔PZT95/5陶瓷微观结构、机械性能和铁电性能的内在联系。研究表明: 孔隙率的增加降低了多孔PZT95/5陶瓷的声阻抗, 改善了陶瓷与封装材料的声阻抗匹配. 孔隙率增加, 多孔PZT95/5陶瓷的屈服应力和剩余极化强度降低, 矫顽场强增大。孔结构对多孔PZT95/5陶瓷屈服应力的影响可由应力集中理论解释; 多孔PZT95/5陶瓷剩余极化强度随孔结构的变化可用内应力结合空间电荷理论加以解释。