一种确定高窄带滤光片峰值波长的方法

本文介绍一种主动式高窄带滤光片峰值波长的测量方法。该方法可以有效的测量出窄带滤光片的敏感波长，而不需要太复杂的设备。通过染料激光谐振腔的模式竞争，可以测量出滤光片的透射或反射波的波长。     

Calorimetric determination of the enthalpy change for the binding of methyl orange to poly(vinylpyrrolidone) in aqueous solution

Thermodynamic parameters have been determined for the interaction of methyl orange and poly(vinylpyrrolidone) in aqueous solutions containing tris, tris and hydrochloric acid, or water only. Enthalpy changes were determined by use of a flow microcalorimeter. Free energy changes were calculated from the results of equilbrium dialysis studies. The results are interpreted in terms of the behaviour of poly(vinylpyrrolidone) in these systems. Analysis of data shows that the hydrophobic interactions in the systems are in the order: tris > wateronly > tris-HC1.     

掺染料激光介质的研究

以PMMA为基质，在助溶剂的作用下掺杂激光染料Rh6G制备出了塑料激光介质样品，采用YAG激光器作为泵浦源测试了塑料激光介质的发射光谱，讨论了其激光发射机理。     

Synthesis and Spectral Properties of Mixed-Ligand Complexes of Lanthanide Perchlorate with Bis-(phenylsulfinyl)ethane and Organic Lewis Bases

ＳｙｎｔｈｅｓｉｓａｎｄＳｐｅｃｔｒａｌＰｒｏｐｅｒｔｉｅｓｏｆＭｉｘｅｄＬｉｇａｎｄＣｏｍｐｌｅｘｅｓｏｆＬａｎｔｈａｎｉｄｅＰｅｒｃｈｌｏｒａｔｅｗｉｔｈＢｉｓ（ｐｈｅｎｙｌｓｕｌｆｉｎｙｌ）ｅｔｈａｎｅａｎｄＯｒｇａｎｉｃＬｅｗｉｓＢａｓｅ...     

Bright Blue Light—emitting Diodes Based on a Novel Fluorescent Dye Containing Heterocyclic Groups

Novel molecular material ,1-benzothiazoly-3-pheny1-pyrazoline (BTPP) was found to function as bright blue light emitting dye in organic electroluminescent device, and its optical and electric characteristics were investigated. This heterovyclic compound exhibited good characteristics of blue photoluminescence and electroluminescence,which had the emission peak at 450nm .The single layer light-emitting devices using BTPP as light -emitting material dispersed in poly(N-vinylcarbazole)(PVK) and double layer ones using PBD as hole block layer above the light-emitting layer were fabricated using conventional spin-casting and vaccum vapour deposition methods. The introduction of PBD has enhanced electron injection and luminance efficiency, compared with the single layer LEDs.     

烯烃聚合工业用有机过氧化物危险性分析及对策研究

有机过氧化物是烯烃聚合工业中重要的引发剂。针对烯烃聚合工业用有机过氧化物自分解温度低、易发生反应失控引发火灾爆炸等情况,简要叙述了有机过氧化物的结构、分类、化学性质以及反应特性,重点对其储存、使用、管理等过程中的危险性进行了分析。提出过氧化物储存、运输、使用、报废等方面的风险消减与事故预防措施。     

Space-charge-limited currents for organic solar cells optimisation

Basic suppositions and microphysical origin of the occurrence of the space-charge-limited currents (SCLC) are presented in general and for the temperature-modulated space-charge-limited currents (TM-SCLC) in particular. The criteria are given for the spectroscopical method TM-SCLC to be used for localized electron states elucidation in organic semiconducting materials for organic solar cells optimization and modelling. The “visibility “of the localized states by SCLC method, i.e. the power of the SCLC method to distinguish the localized states, is tested by the modelling, varying the temperature, energy position of localized states and their concentration. Generally, it was determined that the SCLC measurements results are more reliable with the increased energy of the states, with their increased concentration and with decreased temperature. The correlation (or its absence) between the measured current and activation energy on applied voltage, expressed by the dependence of preexponential factor of conductivity on activation energy (Meyer–Neldel rule), gives the possibility to determine the energy range where the reconstruction of density of localized states function is reliable.     

Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

棉/氨纶弹力织物低温一浴法染色

通过一种新型染色助剂的应用，有效地降低了氨纶分散染料的染色温度，使棉/氨纶弹力织物能在较低的温度下实行散／活性一浴法同色性染色，获得满意的染色效果。     

准分子激光泵浦的皮秒染料激光器

利用准分子激光泵浦猝灭式染料激光器，获得了３０ｐｓ的可调谐染料激光脉冲输出。