Effect of ion irradiation and heat treatment on adhesion in the Cu / Teflon system

To improve the adhesion of a metal coating to Teflon (polytetrafluoroethylene, PTFE), the ion beam technique has been used. Adhesion enhancement was obtained by irradiation of the Cu/Teflon interface with heavy ions in the GeV energy range. XPS analysis gave evidence for the long-range transport of Cu atoms into the polymer. Heating the Cu/Teflon sample after ion irradiation led to even stronger bonding between Cu and Teflon.     

Kinetics of Natural Organic Matter as the Initiator,Promoter, and Inhibitor,and Their Influences on the Removal of Ibuprofen in Ozonation

Natural organic matter (NOM) can simultaneously act as the initiator, promoter and inhibitor in water ozonation. This study presents an explicit method that can be used to determine these rate constants via the integration of the transient steady-state hydroxyl radical (?OH) model, the R_ct concept and the pseudo first-order ozone decomposition model. The theoretical background of this method was provided, and the method was validated with model compounds. The rate constants of three NOM isolates were determined using the developed method. With these rate constants, the influences of NOM on the degradation of ibuprofen, an ?OH-reactive pharmaceutical compound, can be quantitatively described. [Supplementary materials are available for this article. Go to the publisher's online edition of Ozone Science &; Engineering for the following free supplemental resources: tables, figures, and equations.]     

Critical and Subcritical Adhesion Measurements of a Model Epoxy Coating Exposed to Moisture Using the Shaft-Loaded Blister Test

The shaft-loaded blister test (SLBT) was used to investigate the adhesion between a model epoxy coating and a silicon oxide surface as a function of relative humidity. Critical and subcritical strain energy release rates were measured using specimens that incorporate reinforcing layers of Kapton® film. A simplified procedure that eliminates the need for video imaging to measure the blister radius and fracture energy was developed. A critical relative humidity level for adhesion loss was observed, in agreement with measurements that have been made previously in a number of polymeric systems. The SLBT was confirmed to be particularly attractive for fracture energy measurements on thin, strongly adhered coatings and films which otherwise tend to be problematic.     

Poly(thienylenevinylene) prepared by ring-opening metathesis polymerization: Performance as a donor in bulk heterojunction organic photovoltaic devices

Poly(3,4-dioctylthienylenevinylene) (PDOTV) was synthesised by ring-opening metathesis polymerization (ROMP) with controlled molecular weight. PDOTV has been used to fabricate organic photovoltaic devices in combination with phenyl C₆₁-butyric acid methyl ester (PCBM) for the first time. The devices show power conversion efficiency up to 0.18%. Optimal device performance was found at a film thickness of 100 nm and a ratio of PCBM to PTV of 2:1. External quantum efficiency (EQE) measurements, transient absorption spectroscopy and morphology studies were carried out to establish factors governing photovoltaic performance. These results suggest that the efficiency values for the devices were limited by the hole mobility and unexpected phase separation within the blend. Nevertheless, the results show that ROMP is a viable, alternative, synthetic strategy for preparing PTV donors for use in bulk heterojunction OPVs.     

Hydrodynamic effects on erosion-enhanced corrosion of stainless steel in aqueous slurries

This paper studies the hydrodynamic effects of erosive slurry on corrosion of passive target (type 304 stainless steel). The transient current response to disruption of passive film is investigated using the single particle impingement technique. The transient current density over the damaged surface is approximately independent of the hydrodynamics of fluid when the flowing velocity is in range of 5-10 m/s. It is characterized by a sharp rise caused by disruption of passive film and a slow decay due to repassivation. Therefore, the difference in transient current response is a result of different damaged surface area produced by solid particle impingement. After the kinetic parameters of repassivation are determined, the hydrodynamic effects on average corrosion rates of the passive target are quantitatively predictable with aid of the physical model developed by Lu and Luo.     

离子注入技术改性聚合物薄膜的研究进展

离子注入技术改性聚合物薄膜在电子及电器工程中有着巨大的潜在应用价值。综述了近年来聚合物薄膜经离子注入后在导电性能、光学性能、导磁性能及表面力学机械性能等方面的最新进展。分析了注入离子与聚合物相互作用的物理过程,并指出了该领域存在的问题及发展方向。     

Structural and optical properties of four-hexagonal polytype nanocrystalline silicon carbide films deposited by plasma enhanced chemical vapor deposition technique

Four-hexagonal polytype films of nanocrystalline silicon carbide (4H-nc-SiC) were deposited by plasma enhanced chemical vapor deposition method with more than 3×10⁴ W m⁻² threshold of power density, high hydrogen dilution ratio, and bias pretreatment. The source gases were silane, methane and hydrogen. Our work showed that under conditions similar to those used for the growth of μc-SiC—except a higher power densities over a threshold, a bigger bias pretreatment on substrates, and a moderate bias deposition—nc-SiC films could indeed be achieved. The Raman spectra and transmission electron microscopy diffraction patterns demonstrated that the as-grown films from the H₂-CH₄-SiH₄ plasma consist of amorphous network and phase-pure crystalline silicon carbide which has the 4H polytype structure. The microcolumnar 4H-SiC nanocrystallites of a mean size of approximately 1.6×10⁻⁸ m in diameter are encapsulated by amorphous SiC networks. The photoluminescence spectra of 4H-SiC at room temperature, peaking at 8.10×10⁻⁷ m using a wavelength of 5.145×10⁻⁷ m of argon ion laser, were obtained at room temperature; the luminescence mechanism is thought to be related to transitions in the energy band gap which could be ascribed to the surface states and defects in the structure of 4H-SiC nanocrystalline in these films due to its small size. The as-grown films showed an optical transmittance of 89% at 6.58×10⁻⁷ m. This higher transmittance is believed to be from the small size and amorphous matrix.     

SILEX检测与验证

评述了首次实现星问光学连接的欧洲空间局(ESA)的SILEX计划的检测与验证方法,相信对我国星间光通信技术的研究与发展具有一定的促进作用。     

Process Limits of Municipal Wastewater Treatment with the Submerged Membrane Bioreactor

The submerged membrane bioreactor (SMBR) is a promising technology for wastewater treatment and water reclamation. This paper presents results from two pilot scale SMBR systems operating in parallel on municipal wastewater in San Diego, Calif. The SMBRs were operated to address the limitations and advantages of the SMBR process compared to conventional activated sludge processes. Minimal membrane fouling was observed throughout the year of testing with the exception of the process limitations. Both pilot units provided consistently high quality effluents throughout the study, even when operating at hydraulic retention times as low as 1.5 h. Two sets of experiments were conducted to identify different fouling conditions. The first experiments were conducted to explore operation at high suspended solids concentrations. The SMBR process experienced adverse performance at mixed liquor suspended solids concentrations greater than approximately 20?g/L. The second experiments explored operation at low mean cell residence time (MCRT). At an MCRT of <2 days, membrane fouling was rapid. Chemical cleaning with sodium hypochlorite solution provided full recovery of the membrane permeability.     

脉冲激光薄膜制备技术

脉冲激光薄膜沉积是近年来受到普遍关注的制膜新技术。简要介绍了脉冲激光薄膜沉积技术的物理原理、独具的特点和研究发展动态,并介绍了采用脉冲激光薄膜沉积技术制备硅基纳米PtSi薄膜的结果