基于移位原理的顺序控制器研究

本文根据PLC顺序控制程序的设计思路,阐述了用常用集成数码移位寄存器、电力电子开关电路和少量外围电子元件构成移位控制器的原理,根据此设计思路制作的移位控制器经过在实验室环境下运行,证明了设计方案的可行性。     

基于Intel 87c196kc的某机载设备随动系统数字控制器的实现

介绍了某机载光电设备随动系统控制器的设计与实现。该控制器是基于Intel公司87c196kc的数字控制器，设计中充分利用了87c196kc较强的运算能力及其它片内功能，使得控制器设计简捷、调整灵活、体积小，提高了系统的可靠性。     

单片机在监控同步电动机运行功率因数中的应用

介绍如何利用单片机自动控制同步电动机运行时的功率因数。     

PLC在葛洲坝大江电厂机组辅助设备控制中的应用

PLC(可编程控制器)在机械工业和电力生产等部门应用广泛。在电力生产部门主要用于集中控制,已有较好的效果。介绍了PLC在葛洲坝水电厂机组辅助设备控制操作功能中的应用回顾及其展望。     

用ADT14设计的新型电子温控器

ADT14是一种可编程温度监控器电路，可广泛应用于各种控制系统中进行温度检测和控制。用ADT14设计的新型电子温控器具有结构简单，安装方便，温控准确等优点。     

基于DSP的图像灰度校正

本文介绍了一个在用户视频环境下，采用典型非线性因子2.2进行非线性校正的公式；进而给出采用TMS320C2000进行图像灰度校正的软件设计方法。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

应用计算机实现选矿自动化

本文就太钢尖山铁矿计算机控制系统的硬件构成，顺控系统的软件编制、模拟调试以及现场调试等方面展开论述。