A Novel Artificially Humanized Anti-Cripto-1 Antibody Suppressing Cancer Cell Growth

Cripto-1 is a member of the EGF-CFC/FRL1/Cryptic family and is involved in embryonic development and carcinogenesis. We designed a novel anti-Cripto-1 artificial antibody and assessed the recognition to the antigen and the potential to suppress the growth of cancer stem cells. First, single chain antibody clones were isolated by bio-panning with the affinity to recombinant Cripto-1 protein from our original phage-display library. Then, the variable regions of heavy chain VH and light chain VL in each clone were fused to constant regions of heavy chain CH and light chain CL regions respectively. These fused genes were expressed in ExpiCHO-S cells to produce artificial humanized antibodies against Cripto-1. After evaluation of the expression levels, one clone was selected and the anti-Cripto-1 antibody was produced and purified. The purified antibody showed affinity to recombinant Cripto-1 at 1.1 pmol and immunoreactivity to cancer tissues and cell lines. The antibody was available to detect the immunoreactivity in tissue microarrays of malignant tumors as well as in Cripto-1 overexpressing cells. Simultaneously, the antibody exhibited the potential to suppress the growth of human colon cancer derived GEO cells overexpressing Cripto-1 with IC₅₀ at approximately 110 nM. The artificially humanized antibody is proposed to be a good candidate to target cancer cells overexpressing Cripto-1.     

Design of the broadband microstrip array antenna for blast furnace surface monitoring

Aiming at the requirements of high-resolution imaging and high integration of the blast furnace radar,this paper presents a method for designing a wideband microstrip array antenna,which broadens the antenna bandwidth through the design of parasitic patches and air layers.By combining multi-input multi-output (MIMO) radar and synthetic aperture radar (SAR) imaging principles,a linear MIMO array is designed,and a near-field simulation imaging experiment is performed on the simulated feed line through the wave number domain imaging algorithm.Simulation results show that the gain of the main lobe of the antenna can reach 14.05 dBi,the reflection coefficient is less than -10 dB,the absolute bandwidth is 5.25 GHz,the operating frequency is 20.67~25.92 GHz,and the range resolution is increased to 3 cm compared with the existing blast furnace radar.The average error of the azimuth direction of the simulated material line imaging is 0.008 m,and the range direction is 0.0011 m.Compared with the traditional microstrip array antenna,this antenna effectively widens the bandwidth,and the range resolution is higher than that of the traditional blast furnace radar.It can accurately obtain the shape information on the simulated material line,and has an engineering application value for blast furnace surface monitoring.     

大型非周期相控阵天线协同设计

针对大型非周期相控阵天线的特点,提出一种多学科、多领域协同设计的方法。然后运用该方法指导两个产品天线设计,围绕协同设计的典型流程和几个关键控制点展开论述。在测试阶段实测天线的主要指标,天线1辐射端面平面度≤1.4 mm,栅瓣电平≤-20 dB,天线2辐射端面平面度≤1.1 mm,栅瓣电平≤-18 dB,实测数据与仿真结果吻合,各项指标优于设计输入要求,使用性能良好,验证协同设计方法的有效性。最后指明大型非周期相控阵天线协同设计的进一步研究方向。     

DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

复合材料夹层结构产品固化变形分析

本文讨论产生复合材料产品固化变形的主要原因是树脂收缩引起的各方向上不同的线膨胀系数具体分析了复合材料夹层结构的的固化变形，经技术上的改进解决了固化变形，以满足产品的设计要求。     

A strengthened analysis of a local algorithm for the minimum dominating set problem in planar graphs

In recent years growing interest in local distributed algorithms has widely been observed. This results from their high resistance to errors and damage, as well as from their good performance, which is independent of the size of the network. A local deterministic distributed algorithm finding an approximation of a Minimum Dominating Set in planar graphs has been presented by Lenzen et al., and they proved that the algorithm returns a 130-approximation of the Minimum Dominating Set. In this article we will show that the algorithm is two times more effective than was previously assumed, and we prove that the algorithm by Lenzen et al. outputs a 52-approximation to a Minimum Dominating Set. Therefore the gap between the lower bound and the approximation ratio of the best yet local deterministic distributed algorithm is reduced by half.     

自适应天线匹配低频RFID读写器设计

在工业现场、野外甚至水中,RFID读写器天线电特性参数将发生改变,导致阻抗不匹配和发射功率大幅下降,最终降低RFID读写器读写范围和效率。为了解决这个问题,构建了一个自适应天线匹配RFID读写器系统,该系统在基本读写器系统上增加了自适应电容匹配矩阵、正弦波均方根检测和模/数转换器。该系统通过依次配置电容矩阵,扫描天线发射信号幅度,检测出最佳匹配电容,实现天线阻抗的最佳匹配。通过实验表明,在一定范围内该系统能够实现自动的阻抗匹配,获取最大发射功率。     

Kokkos: Enabling manycore performance portability through polymorphic memory access patterns

The manycore revolution can be characterized by increasing thread counts, decreasing memory per thread, and diversity of continually evolving manycore architectures. High performance computing (HPC) applications and libraries must exploit increasingly finer levels of parallelism within their codes to sustain scalability on these devices. A major obstacle to performance portability is the diverse and conflicting set of constraints on memory access patterns across devices. Contemporary portable programming models address manycore parallelism (e.g., OpenMP, OpenACC, OpenCL) but fail to address memory access patterns. The Kokkos C++ library enables applications and domain libraries to achieve performance portability on diverse manycore architectures by unifying abstractions for both fine-grain data parallelism and memory access patterns. In this paper we describe Kokkos’ abstractions, summarize its application programmer interface (API), present performance results for unit-test kernels and mini-applications, and outline an incremental strategy for migrating legacy C++ codes to Kokkos. The Kokkos library is under active research and development to incorporate capabilities from new generations of manycore architectures, and to address a growing list of applications and domain libraries.