Molybdate and tungstate as corrosion inhibitors for cold rolling steel in hydrochloric acid solution

The inhibition effects of molybdate and tungstate on the corrosion of cold rolling steel (CRS) in hydrochloric acid solution (0.1-0.5 M) were investigated by weight loss and electrochemistry methods. The results reveal that both molybdate and tungstate are very good inhibitors with little concentration. The adsorption of inhibitors on the CRS surface basically obeys the Langmuir adsorption isotherm equation. The effect of temperature on the corrosion behavior of CRS was also studied at 25 °C and 35 °C, the thermodynamic parameters such as adsorption heat (ΔH⁰) and adsorption free energy (ΔG⁰) were calculated. In the same conditions, a comparative study of corrosion inhibition of molybdate and tungstate indicated that molybdate was the better inhibitor in 0.1 M HCl. However, the value of percentage inhibition efficiency (IE) was dependent on the concentration of inhibitors in 0.2-0.5 M HCl. It seemed that molybdate did not have the strong inhibitive effect compared to tungstate with relatively small concentration of inhibitors, but molybdate was a better inhibitor over a wide concentration range of inhibitors. A kinetic study of cold rolling steel in uninhibited and inhibited acid was also discussed. Various parameters such as rate constant k and the kinetic parameter B were calculated for the reactions of corrosion. Polarization curves showed that both molybdate and tungstate are mixed-type inhibitors in acidic media.     

高强度结构钢的韧性启裂和稳态扩展

研究了具有一定韧度的高强度结构钢裂纹早期扩展阻力与材料的微观组织结构、应力状态、变形历史和应变特性之间的关系。结果表明:裂纹扩展阻力(指J_R阻力曲线中的J_i和dJ/da)主要决定于裂纹尖端的塑性约束程度和应力应变场中消耗的弹性能和塑性功。这与三轴应力状态函数σ_mσ~(1/2)有关。材料的流变曲线描述了形变过程中的变形历史和应变特性,有明显的阶段性,其中第Ⅱ阶段的变形历史和应变特性制约着裂纹的启裂过程,第Ⅲ阶段的变形历史和应变特性制约着裂纹的扩展过程。应变硬化率dσ/dε可以敏感地反映出材料内部的应力分布和微观断裂机制。     

基于信息元的教学资源组织系统设计与实现 *

以文本类型教学资源为研究对象,在领域知识可拓信息网模型和CELTS-3的基础上,阐述了基于信息元的教学资源组织系统设计与实现过程,包括信息特征元数据描述框架、特征词获取、信息元距离度量、信息元匹配规则以及匹配算法等.该系统通过有限的信息元描述无限的资源,实现了教学资源的高效组织,支持学习过程中资源自动重组.     

Corrosion inhibition of carbon steel in hydrochloric acid by cationic arylthiophenes as new eco-friendly inhibitors: Experimental and quantum chemical study

This study describes the adsorption behavior of three arylthiophene derivatives namely: 2-(4-amidino-3-fluorophenyl)-5-[4-methoxy phenyl] thiophene dihydrochloride salt (MA-1217), 2-(4-amidinophenyl)-5-[4-chlorophenyl] thiophene dihydrochloride salt (MA-1316) and 2-(4-amidino-3-fluorophenyl)-5-[4-chlorophenyl]thiophene dihydrochloride salt (MA-1312) at C-steel in 1.0 mol·L^-1 HCl interface using experimental and theoretical studies. Electrochemical and mass loss measurements showed that the inhibition efficiency (IE) of the arylthiophene derivatives increases with increasing concentrations and exhibited maximum efficiency 89% at 21×10^-6 mol·L^-1 (MA-1217) by mass loss method. The investigated arylthiophene derivatives obey the Langmuir adsorption isotherm. From polarization studies the arylthiophene derivatives act as mixed-type inhibitors. Surface analysis were carried out and discussed. The mode of orientation and adsorption of inhibitor molecules on C-steel surface was studied using molecular dynamics (MD) simulations. Quantum chemical parameters as well as the radial distribution function indices and binding energies confirm the experimental results.     

基于非侵入式负荷监测的用户行为精细化分析

随着非侵入式电力负荷监测的发展,如何利用用户负荷用电细节信息,分析用户用电行为特征成为重要的研究方向。本文提出了基于非侵入式负荷监测的用户行为精细化分析方法,根据历史数据建立用户行为特性指标,提出基于因子分析与支持向量机的用户聚类方法。在此基础上,建立基于精细化负荷数据的用户需求响应潜力评估指标。算例结果表明,所研究内容可以准确分析用户行为,为电力公司施行需求侧管理提供科学指导。     

采用循环伏安法研究微孔型多孔炭电极的电容特性

以酚醛树脂为原料,KOH为活化剂,制备出3种不同孔径分布的微孔型多孔炭(孔径≤2 nm)。在低温氮气吸附法测定BET比表面积和孔结构的基础上,采用循环伏安法考察了这3种微孔型多孔炭作电极的双电层电容器(EDLC)的电容特性。实验结果表明,微孔型多孔炭作电极的EDLC的电容特性是:在低扫描速率下,其循环伏安曲线达到电容平台后在高电压(±1.0 V)附近出现峰电容;延长在电解液中的浸渍时间,电极的比电容增大,高电位附近的峰电容减小。3种不同孔径分布的微孔型多孔炭作电极的EDLC的循环伏安特性受浸渍时间影响的程度也不同。     

TQFR-3000 型同步牵引发电机的外特性曲线分析

TQFR-3000型同步牵引发电机在考虑电压电流的限制条件下,为了充分利用柴油机的功率,同步牵引发电机外特性曲线和功率曲线应该保持在理想状态。而同步牵引发电机所拥有的自然外特性曲线,无法使柴油机保持恒定功率。通过对TQFR-3000型同步牵引发电机的外特性曲线进行分析并调节,使同步牵引发电机的外特性曲线和功率曲线达到理想状态。     

Electrochemical characteristic of chemical-mechanical polishing of copper with oxide passive film

1　INTRODUCTIONThankstoitslowresistivityandhighelectromi grationresistance ,copperappearstobeaverypromisingsubstituteforaluminumininterconnec tions[1] .However ,copperisverydifficulttopattern ,andonlychemical mechanicalpolishing (CMP)tech nologycanresolvethisproblem[2 ] .CMPwasinitiallyinvestigatedandopenedoutfrom 1980soverseas[3] ,anditisthebestandonlyglobalplanarizationtech nologyatpresent ,butkeepsholdofbusinesssecretsallthetime .Fayolleetal[2 ] researchedCMPprocessofcopperwhereFe(…     

碳钢在含硫介质中的极化行为

采用原油罐罐底水为介质,测定了不同含硫量、PH值以及不同温度下碳钢的极化曲线,分析了各因素对碳钢极化行为的影响。研究结果表明:碳钢在硫含量大于0.2g·L～（-1）、PH值大于9以及一定电位下处于钝化状态,腐蚀电流小;较高温下将大大加速碳钢的腐蚀。     

浅析影响汽车轮毂跳动的几个因素

汽车轮毂的跳动是一个非常重要的性能尺寸，它影响着汽车运行的平稳性及安全性。论文从理论上简单地分析影响轮毂跳动的五个环节，同时对影响轮毂跳动较大的环节进行试验分析，并运用统计过程控制的方法进行了验证。