n埋层PSOI结构射频功率LDMOS的输出特性

提出了具有n埋层PSOI(部分SOI)结构的射频功率LDMOS器件.射频功率LDMOS的寄生电容直接影响器件的输出特性.具有n埋层结构的PSOI射频LDMOS,其Ⅰ层下的耗尽层宽度增大,输出电容减小,漏至衬底的结电容比常规LDMOS和PSOI LDMOS分别降低39.1%和26.5%.1dB压缩点处的输出功率以及功率增益比PSOI LDMOS分别提高62%和11.6%,附加功率效率从34.1%增加到37.3%.该结构器件的耐压比体硅LDMOS提高了14%.     

The specific heat and thermal conductivity of Eccosorb CR-124 between 800 mK and 6 K

Eccosorb CR-124 is a castable iron-loaded epoxy resin with excellent absorption properties for electromagnetic waves in the GHz range. It is commonly used in low temperature instruments to absorb thermal radiation. The specific heat c(T) of Eccosorb CR-124 was measured between 800 mK and 6 K with the heat pulse method. The results were fitted to the function , with T being the temperature in Kelvin. In addition, the thermal diffusivity D(T) of Eccosorb CR-124 was determined. At a temperature of 2.3 K, a peak is observed in D(T). Consequently, the thermal conductivity λ(T) of Eccosorb CR-124 features two distinct regimes. Below 2.3 K, it fits the function . Above 2.3 K, it fits the function .     

射频功率对非晶硅膜固相晶化效果的影响

于不同射频功率下制备出非晶Si膜并对其进行真空退火处理,采用XRD、TEM和少子寿命测试仪等检测手段分析了退火前后薄膜的微观结构及电学性能。研究发现,随着射频功率的增加,薄膜的中程有序度和少子寿命均呈先增后减的趋势。经真空退火处理后,非晶硅膜得以晶化,少子寿命较退火前有大幅提高;另外,退火后薄膜的晶化率和少子寿命随射频功率的变化趋势与退火前一致,说明同一热力学条件下薄膜的中程有序度越高越容易发生晶化。     

Ba0.6Sr0.4TiO3薄膜的微结构及铁电性能研究

采用射频磁控溅射法制备了Ba0.6Sr0.4TiO3(简称BST)薄膜材料,研究了BST薄膜的组成、晶体结构、表面形貌及介电性能.介电偏压特性曲线和电滞回线都表明其具有铁电性,厚度为500 nm、晶粒尺寸为30 nm的BST薄膜,介电系数电压变化率(介电调谐率)为29.4%,矫顽场强(EC)约为12.1 kV/cm,并讨论了介电偏压特性曲线和电滞回线之间的联系,解释了电滞回线不对称的原因.     

Analysis of the characteristics of the plasma of an RF driven ion source for a neutral beam injector

A radio frequency(RF)driven ion source is a very important component of a neutral beam injector for large magnetic confinement fusion devices.In order to study the key technology and physics of an RF driven ion source for a neutral beam injector in China,an RF ion source test facility was developed at the Institute of Plasma Physics,Chinese Academy of Sciences.In this paper,a two-dimensional fluid model is used to simulate the fundamental physical characteristics of RF plasma discharge.Simulation results show the relationship of the characteristics of plasma(such as electron density and electron temperature)and RF power and gas pressure.In order to verify the effectiveness of the model,the characteristics of the plasma are investigated using a Langmuir probe.In this paper,experimental and simulation results are presented,and the possible reasons for the discrepancies between them are given.This paper can help us understand the characteristics of RF plasma discharge,and give a basis for further R&D for an RF ion source.     

合肥光源的新高频腔阻抗谱计算

用电磁场计算软件MAFIA，在时域和频域两种情况下，对高频腔的耦合阻抗及电子束在此结构中产生的尾场进行了计算。结果表明，新高频腔里存在较强的高次模，需要采取措施加以抑制。     

Optical and structural properties of CuCrO2 thin films on c-face sapphire substrate deposited by reactive RF magnetron sputtering

Reactive sputtering with Ar/N₂ mixture gas was introduced to improve stoichiometry of p-type transparent CuCrO₂ films, and effects of N₂ partial pressure ratio (α_N) on optical and structural properties were investigated. Film composition was changed from Cu rich (i.e. Cr poor) to Cr rich (i.e. Cu poor) by N₂ addition, and the stoichiometric film was grown at α_N of about 20%. Although N atoms were not incorporated into the films from analyses of crystal structure and chemical bonding state, both transmittance from visible to near-infrared wavelength and crystallinity were improved at α_N up to 10%. These improvements were attributed to suppression of the CuO formation and promotion of the O-Cu-O dumbbell bonds formation. This was confirmed by the decrease of diffraction intensity from CuO and the increase of vibrational intensity corresponding A_1g mode. From these results, it can be considered that N atoms decreased not only Cu but also excess O in the film. At α_N of 20% or above, transmittance at wavelength of 450 nm and crystallinity deteriorated. This is supposed that excessive N₂ addition probably generated both O and Cu deficiencies. As a result, it was found that slightly Cu-rich composition is suitable to obtain high-transparency CuCrO₂ thin films for practical use.     

Signal level performance variation of radio frequency identification tags used in cow body

Ruminant diseases are strictly connected to pH and temperature values of the rumen. Therefore, the attenuation to dynamic measurement and tracking of both pH and temperature values through animal rumen has grown rapidly for decades. Reading performance of RFID tags depends on signal quality and signal level, and this can be understood by means of wave attenuation through tissue. In this article, attenuation through cow body is investigated for improving reading performance and battery life. Number of receiving antennas will be used in the system, their location and heights are critical for this aim. Signals from different points of animals' body are measured and compared with the signals spread just out of RFID tags. Equivalent dielectric constants of tissue between RFID tag and receiving antenna is modeled by using literature data, and finally simulation and analytical results are verified by measurement results. Measured value of attenuation through the cow body is varying between 25 dB and 87 dB for RFID tags operating at 434 MHz. Within the 30 m radius, the strongest signal is obtained at 50 cm height and taken from the left side of the animal body, which is offered as optimum communication position.     

外军机载激光/射频一体化通信技术研究进展

总结了外军机载激光通信、高速射频通信和激光/射频一体化通信的发展情况,针对典型项目分析了应用场景、技术体制以及达到的功能和性能指标等,阐述了关键技术及实施途径等,最后展望了未来发展。     

基于并联射频驱动信号的多载波光源的优化

应用有效光信噪比理论分析了多载波光源的性能,并在对已有的方案进行优化分析的基础上,提出一种可以产生大数目子载波的多载波光源优化方案,即：通过并联射频驱动信号来抑制主要串扰分量;其次,提出利用多种子光源和并联射频驱动信号构成多载波光源进行大数目子载波的产生。通过Matlab的仿真结果表明,方法是有效的,并根据仿真结果对模型的参数进行了优化。