新型聚丙烯接枝物的制备及应用

为制备强韧的共混材料,利用熔融接枝法研制了含有两种接技单体的新型聚丙烯接枝物,讨论了第二单体在接枝过程中的作用,并将其应用于尼龙6/聚丙烯(PA6/PP)共混体系,获得了使分散相粒径更细小、界面更模糊的增容效果。     

单束纤维增强树脂基复合材料的热水老化性能研究

在96℃水中,对开芙拉29(Kevlar29),开芙拉49(Kevlar49)和聚苯撑苯并唑(PBO)纤维束增强的环氧树脂和双马树脂基复合材料进行老化实验后,再在60℃下进行干燥脱水处理。实验测定了吸水和脱水阶段的含水率及热水老化试样和干燥试样的弯曲性能。结果表明:在热水作用下,复合材料的弯曲强度和模量随热水老化时间的延长呈下降趋势,纤维与树脂基体间的界面发生破坏;再干燥脱水后,材料的弯曲强度和模量恢复,但仍低于未老化试样的性能,纤维与树脂基体间的界面破坏情况也类似。     

花岗岩残积土-土工格栅界面的后循环剪切行为研究

花岗岩残积土在华南、东南沿海、南岳、新疆等地区广泛分布,前人的研究多集中在结构性及微观特性上,后循环加载、位移演化、土壤密度等因素对筋-土界面的剪切特性及加筋作用效果的影响评估研究较少。从循环试验剪切刚度这一重要参数入手,以加载次数、加载频率值、位移振幅值、土壤重度值为自变量,应用控制变量法,通过设计循环直剪试验,得到加筋花岗岩残积土的剪切应力与剪切位移、垂直位移与剪切位移关系曲线进行观察对比,结果表明:花岗岩残积土土工格栅界面剪切刚度受位移半振幅、土壤干重度影响很大,受加载频率影响很小,循环加载并没有弱化后循环界面剪切强度,剪切位移与位移半振幅呈负相关关系。     

An exploratory study on ontology engineering for software architecture documentation

The usefulness of Software Architecture (SA) documentation depends on how well its Architectural Knowledge (AK) can be retrieved by the stakeholders in a software project. Recent findings show that the use of ontology-based SA documentation is promising. However, different roles in software development have different needs for AK, and building an ontology to suit these needs is challenging. In this paper we describe an approach to build an ontology for SA documentation. This approach involves the use of typical questions for eliciting and constructing an ontology. We outline eight contextual factors, which influence the successful construction of an ontology, especially in complex software projects with diverse AK users. We tested our ‘typical question’ approach in a case study and report how it can be used for acquiring and modeling AK needs.     

废胶粉/聚丙烯热塑性弹性体的界面增容研究

采取多种相容剂和反应加工手段，设计轮胎胎面废胶粉（WRP）与聚丙烯（PP）体系的不同界面，旨在制备出性能优异的热塑性弹性体（TPE）。研究了纯WRP／纯PP、三元乙丙橡胶（EPDM）包覆WRP／纯PP、丁苯吡橡胶（BSPR）包覆WRP／接枝马来酸酐聚丙烯（MPP）／PP、特殊高分子相容剂（SMC）包覆WRP／纯PP、原位接枝胺基WRP／MPP／PP、动态接枝纯WRP／纯PP等六种体系制备的TPE的性能，WRP／树脂质量比为70／30。结果表明，采用后三种体系制备的TPE性能优良，已经接近天然橡胶／聚丙烯TPE的性能水准，但WRP必须用酚醛树脂进行改性。据此，提出强界面和合适的界面模量过渡是制备废胶粉／树脂热塑性弹性体的关键。TEM的相态研究表明：胶粉的分散粒径在几到十几个微米之间，较原始粒径有很大的细化。     

Chaos in parametric resonance flow at water-mercury interface

In the electrochemical system with liquid-liquid interface, intense local convections by the resonance with potential pulses take place. Therefore, with laser beam scattering, temporal movement of the water-mercury interface was observed. As a result, the scattering efficiency showed non-linear oscillation.

Such non-linear response could be controlled by potential pulse height. As the potential height was increased, new scattering peaks in the oscillation emerged, which was expected of a kind of bifurcation phenomenon. From these results, phase portrait, Poincarè section, correlation dimension of the strange attractor and the largest Lyapunov exponent of the trajectories were obtained. Consequently, it was concluded that all the parameters indicate chaotic behavior of the resonance flow.     

界面改性PA6/TPE共混物的形态结构与性能

通过控制马来酸酐(MAH)的用量制得不同接枝率的马来酸酐接枝热塑性弹性体(TPE-g-MAH),利用其与尼龙6(PA6)在共混过程中的反应增容作用,实现了与PA6的相容共混,并研究了PA6/TPE共混物的结构与性能。结果表明,TPE-g-MAH可有效地提高PA6/TPE共混物的韧性,且随着其接枝率的增加,共混物的韧性提高;TPE-g-MAH有效地改善了PA6/TPE共混物的界面相容性,并且随着其含量的增加,相界面增容效果变好。     

Impact of “Super Acid” like filler on the properties of a PEGDME/LiClO4 system

Composite polymer electrolyte based on a new class of filler added to a PEGDME/LiClO₄ model system has been investigated. “Ceramic super acids” used consist of grafted SO₄²⁻ groups on Al₂O₃ particles surface obtained by calcinations route. Conductivity, DSC and FT-IR measurements performed on such composite electrolytes, when compared to the model PEGDME/LiClO₄ electrolyte, showed only slight improvement of their inner characteristics. In contrary, Li/Li symmetric cells study, by means of impedance spectroscopy, has presented a spectacular decrease of the interfacial resistance compare to the model electrolyte. This result opens a new pathway of investigation to master the lithium metal/polymer electrolyte interface.     

基于国家电网的财务管理系统的开发与研究

随着社会生产力的不断发展,越来越多的企业认识到了财务工作的重要性。企业要利用现代高效的运作方式来开发和管理组织中最重要、最昂贵的资源,实现财务管理的精细化、自动化,提高财务资源的利用率,促进企业的发展。     

基于STM8的热膜式流量计信号处理和自动标定系统

热膜式空气流量计具有尺寸小、灵敏性好、可靠性高、响应时间短等优点。它采用热膜传感单元与外围电路协同工作的模式。采用stm8l151单片机为核心的数字化电路能够很好的控制热膜上加热器的工作温度,将热膜产生的信号进行滤波和放大。配合采用LabVIEW编制的上位机控制界面,实现流量计的快速自动标定。