高温超导红外探测器的电极工艺探讨

介绍了高温超导红外探测器电极材料的选择和制备。选用先蒸、后蒸金，再合金化的电极工艺。芯片装配成器件后，器件性能稳定，膜层牢固，接触电阻小。     

Terahertz detectors based on superconducting hot electron bolometers

Low noise terahertz(THz)heterodyne detectors based on superconducting niobium nitride(NbN) hot electron bolometers(HEBs)have been studied.The HEB consists of a planar antenna and an NbN bridge connecting across the antenna’s inner terminals on a high-resistivity Si substrate.The double sideband noise temperatures at 4.2 K without corrections have been characterized from 0.65 to 3.1 THz.The excess quantum noise factor β of about 4 has been obtained,which agrees well with the calculated value.Allan variance of the HEB has been measured,and Allan time up to 20 s is obtained using a microwave feedback method.Also,the intermediate frequency gain bandwidth(GBW)was measured using two dierent methods,resulting in same GBW value of about 3.5 GHz.     

Controlled experiments to study corrosion effects due to external varying fields in embedded pipelines

We present controlled laboratory tests carried out to study corrosion effects due to induction currents on pipes embedded in environments with electrical resistance lateral discontinuities. Sacrificial anodes were connected to underground pipes, and corrosion rates were estimated by measuring the mass loss in each anode. We considered 1 Hz and 50 Hz inducting fields, and the effects produced on the pipes were compared with cases without an external field. The results indicated an increase in the corrosion rate when the pipe was under the effect of induction currents, particularly where there was a change of electrical resistance in the soil.     

Selective oxidation of Fe-30Ni alloy in a low-temperature range (433–473 K)

Fe-30Ni alloy specimens were oxidized for 10–240 min at 433–473 K in pure oxygen at a pressure of 1.33×10⁴ Pa. The thickness of oxide films was measured by a multiple-angle-of-incidence ellipsometer. The kinetics of film growth were found to obey a parabolic rate law. The depth-profiling of oxidized surfaces, performed with simultaneous use of Auger electron spectroscopy (AES) and argon-ion sputter-etching technique, reveals that iron component is selectively oxidized and an iron-depeletion zone is formed in the underlying alloy. The thickness of the iron depletion zone increases with increasing oxidation time or oxidation temperature. During surface oxidation of the alloy, the transport rate of iron component in the film is almost equal to the interdiffusion rate in the underlying alloy, indicating the establishment of a steady state. The values of the interdiffusion coefficient, , of the underlying alloy estimated from the depth-composition profiles are more than 10 orders of magnitude as large as the values extrapolated from the lattice diffusion data of the corresponding alloy obtained at high temperature. The enormously large values of may be explained in terms of the vacancy (monovacancy or divacancy)-enhanced lattice diffusion mechanism.     

Selective leaching of vanadium from V-Ti magnetite concentrates by pellet calcification roasting-H_2SO_4 leaching process

A novel method of pellet calcification roasting-H_2 SO_4 leaching was proposed to efficiently separate and extract vanadium(V) from vanadium-titanium(V-Ti) magnetite concentrates.The leaching rate of V is as high as 88.98%,while the leaching rate of impurity iron is only 1.79%.Moreover,the leached pellets can be used as raw materials for blast furnace ironmaking after secondary roasting.X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy with energy dispersive X-ray spectrometry(SEMEDS) analyses showed that V~(3+) was oxidized to V~(5+) after roasting at 1200℃,and V~(5+) was then leached by H_2 SO_4.X-ray diffraction(XRD) analyses and single factor experiment revealed a minimal amount of dissolved Fe_2 O_3 during H_2 SO_4 leaching.Therefore,a high separation degree of V and iron(Fe) from V-Ti magnetite concentrate was achieved through H_2 SO_4 leaching.Compared with the traditional roastingleaching process,this process can achieve a high selectivity of V and Fe,and has excellent prospects for industrial production.     

Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments

The short term (∼100 h) oxidation behaviour of the 9%Cr steel P91 was studied at 650 °C in N₂-O₂-H₂O gas mixtures containing a relatively low oxygen level of 1%. The oxidation kinetics were measured thermogravimetrically and the oxide scale growth mechanisms were studied using H₂¹⁸O-tracer with subsequent analyses of oxide scale composition and tracer distribution by MCs⁺-SIMS depth profiling. The corrosion products were additionally characterised by light optical microscopy, SEM-EDX and XRD. It was found that the transition from protective, Cr-rich oxide formation into non-protective mixed oxide scales is governed by the ratio H₂O^(g)/O₂ ratio rather than the absolute level of H₂O^(g). The results of the tracer studies in combination with the data obtained from experiments involving in situ gas changes clearly illustrated that under the prevailing conditions the penetration of water vapour molecules triggers the enhanced oxidation and sustains the high growth rates of the poorly protective Fe-rich oxide scale formed in atmospheres with high H₂O^(g)/O₂ ratios. The experimental observations can be explained if one assumes the scale growth to be governed by a competitive adsorption of oxygen and water vapour molecules on external and internal surfaces of the oxide scales in combination with the formation of a volatile Fe-hydroxide during transient oxidation. The formation of the non-protective Fe-rich oxide scales is suppressed in atmospheres with low H₂O^(g)/O₂ -ratios, and the healing of any such scale is promoted.     

龙游黄铁矿灵山东部锌硫矿石选矿研究

提出抑制锌硫首先脱除石墨，铜铅混选及分离，锌硫化先浮选方案，获得了铅、锌、硫三种精矿产品，选矿指标较为理想。合理的利用了井下酸性水，降低了选矿成本和对环境的污染。     

A 5 GHz LC-VCO frequency synthesizer for unlicensed band of WiMAX

This paper presents a low power and low phase noise CMOS integer-N frequency synthesizer based on the charge-pump Phase Locked Loop (PLL) topology. The frequency synthesizer can be used for IEEE 802.16 unlicensed band of WiMAX (World Interoperability for Microwave Access). The operation frequency of the proposed design is ranged from 5.13 to 5.22 GHz. The proposed Voltage-Controlled Oscillator (VCO) achieves low power consumption and low phase noise. The high speed divider is implemented by an optimal extended true single phase clock (E-TSPC) prescaler. It can achieve higher operating frequency and lower power consumption. A new frequency divider is also proposed to eliminate the hardware overhead of the S counter in the conventional programmable divider. The proposed frequency synthesizer consists of a phase-frequency detector (PFD), a charge pump, a low-pass loop filter, a VCO, and a frequency divider. The simulated phase noise of the proposed VCO is −121.6 dBc/Hz at 1 MHz offset from the carrier frequency. The proposed frequency synthesizer consumes 13.1 mW. The chip with an area of 1.048 × 1.076 mm² is fabricated in a TSMC 0.18 μm CMOS 1P6M technology process.     

用于甲烷选择性氧化反应制甲醇的膜催化技术

研究了将甲烷选择性地一次氧化制取甲醇的膜催化技术。采用ZrO2－Y2O3陶瓷膜，在较温和的反应条件下（常压，460℃左右），可以将甲烷选择性地一次氧化成为甲醇。     

Selective oxidation of ammonia to nitrogen on transition metal containing mixed metal oxides

The selective catalytic oxidation of ammonia to nitrogen (NH₃-SCO) has been studied over hydrotalcite derived mixed metal oxides containing Cu, Co, Fe or Ni. XRD, BET, NH₃-TPD and TPR techniques were used for catalysts characterization. Results of NH₃-SCO were compared with those of selective catalytic reduction of NO with NH₃ (NO-SCR). Reaction mechanism was studied by temperature-programmed surface reaction (TPSR) and activity tests with a various contact time. Catalytic performance of the studied samples depends on both kind and loading of transition metals in the mixed metal oxide system. The Cu-containing samples have been found to be the most active catalysts of the NH₃-SCO process. Transition metal loading strongly influences distribution of ammonia oxidation products. The highest selectivity to N₂ was measured for the catalysts with the lowest transition metal content.