Borides at interfacial zone of IC6 TLP bonded joints

1　INTRODUCTIONTransientliquidphase (TLP)bondingtechniquehasbeensuccessfullyusedinjoiningheatresistantal loys ,likeHastelloyX ,Inconel713C ,In10 0 ,Udimet5 0 0 ,70 0 ,MarM 2 0 0 ,0 0 7,2 4 7,30 2 ,Rene′80 ,TD NiCr ,MA75 4,6 0 0 0 ,PWA14 2 2 ,CSMX 2etc ,whicharesusceptibletohotcrackingor post weldheat treatmentcrackingproblemsduringfusionweld ing[14 ] .Inaddition ,therewerereportsofjoiningNiAlandTiAlintermetallicsbyTLPbondingmethod[510 ] .Forexample ,Galehadinvestigatedthemic…     

深过冷Fe76B12Si12超细晶材料的凝固组织与软磁性能

首次采用深过冷加水淬的方法,成功地制备了直径为16 mm的样品,高为15 mm,组织中颗粒平均尺寸约为120nm左右的Fe76B12Si12合金超细晶材料.其磁损耗P1T400和P1T1000分别为普通硅钢片的40%和65%.系统研究了组织类型及Fe2B(Si)相尺度对该合金软磁性能的影响,发现该合金的最佳软磁性能位于Fe2B(Si)相完全粒化的非规则共晶组织区,并且当Fe2B(Si)相尺寸细化至0.36～0.50μm时,其软磁性能随着相尺寸的减小而大幅度改善.对以上结果产生的原因进行了讨论.     

Si及变质处理对Mg2Si/Mg复合材料的影响

分析了Mg-Si二元合金直接原位形成Mg2Si/Mg复合材料的过程,研究了Si含量以及变质处理对复合材料组织和性能的影响。试验结果表明,随着合金中Si含量的增加,合金的流动性降低,复合材料中原位Mg2Si的数量增多,树枝晶形态更为发达;对优化的Mg-8Si合金,进行混合稀土(MM)和Sb变质处理,可明显改善Mg2Si的形态和分布,但Sb变质的效果要好于MM。合金经质量分数为1.2%的Sb变质处理后,Mg2Si以颗粒状均匀分布在Mg基体中,从而使复合材料具有较好的耐磨性。     

利用高频磁场制备自生梯度复合材料的熔体温度选择

研究了通过在熔体凝固过程中的不同温度范围施加高频磁场制备自生梯度复合材料的工艺.对于Al/Mg2Si/Si自生梯度复合材料,近似计算及实验结果表明:Al Mg2Si二元共晶区(555～595C)是施加高频磁场的最佳温度范围,此时处于低粘性熔体中的增强颗粒容易被外加电磁阿基米德力分离.高频磁场施加温度过高或过低,均不易使增强颗粒产生梯度分布效果.     

Al2O3／TiB2／SiCW陶瓷刀具加工镍基合金时的磨损机理研究

研究了Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ陶瓷刀具加工Ｉｎｃｏｎｅｌ７１８镍基合金时的切削性能和磨损机理。结果表明；在低速切削条件下，Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ和硬质合金刀具的抗后刀面磨损的能力相差不大；而在高速切削条件下，前者的抗后刀面磨能力远高于后者。     

共沉淀法制备三元系铋基焦绿石型陶瓷粉体

采用改进的Mergen A．方案，用氧化锌、三氧化二铋、三氧化二锑为原料，氨水、草酸铵和碳酸铵分别为沉淀剂，盐酸为溶剂，用共沉淀法成功制备了亚微米级颗粒、高活性的铋基Bi1.5ZnSb1.5O7（BZS）焦绿石型介电陶瓷粉体。探讨了用不同的沉淀剂、在不同的烧结温度所得产物的形态。结果表明氨水做沉淀剂在570℃就可生成纯的焦绿石结构。与Mergen A方法相比成本大大降低，可以使瓷片组织的均匀性提高，电性能得到改善，电压梯度下降。     

氮化硅结合碳化硅管状制品的研制

简介了氮化硅结合碳化硅管状制品研制的必要性 ,确定了原材料及粒度配比 ,选择了合适的成型方法及添加剂 ,介绍了氮化烧成机理。研制出的制品其质量和使用性能接近同类进口产品 ,具有良好的市场前景和广泛的推广应用价值。     

Benchmarking Fluvial Dynamics for Process‐Based River Restoration: the Upper Rhine River (1816–2014)

Multi‐temporal analysis of river‐floodplain processes is a key tool for the identification of reference conditions or benchmarks and for the evaluation of deviations or deficits as a basis for process‐based river restoration in large modified rivers. This study developed a methodology for benchmarking fluvial processes at river segment level, focusing on those interrelations between morphodynamics (aggradation, erosion, channel shift) and vegetation succession (initial, colonization, transition) that condition habitat structure. Habitat maps of the free‐flowing Upper Rhine River downstream from Iffezheim dam (France–Germany border) were intersected with a geographic information system‐based approach. Patches showing trajectories of anthropization, changeless, progression and regression allowed for the identification of natural and human‐induced processes over almost 200 years. Before channelization, the riverine system was characterized by a shifting habitat mosaic with natural heterogeneity, high degree of surface water connectivity and equilibrium between progression and regression processes. On the other hand, the following 175 years of human interventions led to severe biogeomorphologic deficits evidenced by loss of natural processes and habitat heterogeneity, hydrological disconnection between the river and its floodplain and imbalance of progression versus regression dynamics. The main driving forces of change are found in hydromorphological impacts (channelization, regulation and hydropower plant construction). Regression processes are now almost absent and have to be the objective of process‐based river restoration measures for the studied river‐floodplain system. A sustainable view on water management and river restoration should aim at a more resilient riverine system by balancing the recovery of natural processes with societal needs. Copyright © 2016 John Wiley & Sons, Ltd.