SiCp/2024铝基复合材料的超塑性变形行为研究

对经过热处理和冷轧后的体积分数为17％，尺寸为3．5μm的SiC颗粒增强2024铝合金薄板在753－853K范围内进行了超塑性实验研究. 结果在813K时以10^-1/S的变形速率下获得了259％的最大延伸率，最大应力敏感系数为0．25复合材料的变形激活能值在753－793K范围内为144kJ/mol，在813－853K内为202kJ/mol，接近纯铝的晶格扩散激活能值142kJ/mol。复合材料的变形机制主要为基体晶粒滑动机制。     

SiC FIBER／ALUMINIUM PREFORM WIRES FABRICATEDBY ULTRASONIC LIQUID INFILTRATION PROCESS

ＳｉＣＦＩＢＥＲ／ＡＬＵＭＩＮＩＵＭＰＲＥＦＯＲＭＷＩＲＥＳＦＡＢＲＩＣＡＴＥＤＢＹＵＬＴＲＡＳＯＮＩＣＬＩＱＵＩＤＩＮＦＩＬＴＲＡＴＩＯＮＰＲＯＣＥＳＳＺｈａｎｇＣｈｅｎｇｅ；ＷａｎｇＬｉｎｇｓｅｎ（ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆ...     

SiC_w/6061Al复合材料的组织与性能SCIEI

本文对SiC_w/6061Al复合材料的组织与性能进行了研究,结果表明,压铸法可以制备出高强度、高模量的各向同性复合材料,挤压使复合材料的强度由压铸态的582MPa提高到639MPa,并使材料变为各向异性,这可以由晶须的定向排列和基体的高密度位错得到解释。复合材料的抗高温性能要比基体高150℃,透射电镜观察还发现,层错是SiC晶须中常见的一种面缺陷。     

浸渗工艺对SiC/Al复合材料残余气孔率的影响

采用无压浸渗法制备了SiC／Al复合材料，从浸渗动力学和工艺方法的角度探讨了浸渗保温时间和降温方式对复合材料的残余气孔率的影响。结果表明：随着保温时间的适当延长，能有效地降低复合材料的残余气孔率;连续降温优于分段降温，有利于降低SiC／Al复合材料的残余气孔率。     

浸渗工艺对SiC/Al复合材料残余气孔率的影响

采用无压浸渗法制备了SiC/Al复合材料,从浸渗动力学和工艺方法的角度探讨了浸渗保温时间和降温方式对复合材料的残余气孔率的影响。结果表明:随着保温时间的适当延长,能有效地降低复合材料的残余气孔率;连续降温优于分段降温,有利于降低SiC/Al复合材料的残余气孔率。     

粉末冶金法制备SiC晶须增强MB15镁基复合材料

采用粉末冶金法制备了SiC晶须增强镁基复合材料(SiCW／MB15)试样。通过检测基体显微硬度探讨了SiCW对镁合金时效规律的影响，并借助扫描电镜(SEM)、透射电镜(TEM)和拉伸试验，研究了混粉方式对复合材料室温力学性能、SiCW分布及显微结构的影响。结果表明，MB15及其复合材料的时效硬化曲线上均存在双峰现象；SiCW的加入既提高了MB5的硬度，又加快了其时效速度：混粉方式对晶须分布及SiCW／MB15复合材料的室温力学性能影响很大。     

隔焰辊道窑碳化硅板的研究

本文主要对隔焰辊道窑碳化硅板的配方选择、热震损伤、抗氧化性能和结构形状进行探讨.     

β-Sialon-Al2 O3-SiC系复相材料的研制和性能

研究了在 15 0 0℃的流动氮气中 ,用Al粉、Si粉、Al2 O3粉、刚玉和SiC的颗粒及细粉直接制备 β Sialon -Al2 O3-SiC系复相材料的氮化烧结技术。XRD和SEM分析表明 ,结合相 β Sialon的显微形貌随刚玉量的增加由纤维状向棱柱状转变 ,发育良好。复相材料的高温抗折强度高于常温抗折强度。抗热震试验结果显示 :添加适量的刚玉对β Sialon -SiC复相材料和添加适量的SiC对β Sialon -刚玉 复相材料都具有良好的增韧效果 ,这是β Sialon的纤维增强及柱状晶体原位自补强增韧和复合弥散相增韧综合作用的结果。抗碱和抗高炉渣试验均显示了该复相材料优良的抗碱和抗铁渣侵蚀能力。     

Fabrication of Porous SiC Ceramics with Special Morphologies by Sacrificing Template Method

Sacrificial template technique is widely used in producing porous materials with controlled morphologies and tailored properties. In this paper, unique templates such as filters, carbon nanotube, carbon fiber and silica were used to make porous SiC ceramic with special morphologies. Template derived porous ceramic plates, SiC nano-net, fiber-inverse and bead-inverse porous SiC ceramic were successfully prepared from the preceramic precursor, polymethylsilane (PMS). The synthesis procedures were involved with the infiltration of the templates with appropriate concentration of the preceramic polymer, their curing, pyrolysis and subsequent template removal. The synthesized porous SiC was characterized by SEM, TEM, XRD and BET methods.     

Production of β-SiC by pyrolysis of rice husk in gas furnaces

Short fibers and fine particles of β-SiC were obtained by pyrolysis of Colombian rice husk (RH). The synthesis of SiC was carried out in a gas furnace: a mathematical model was developed in order to design and build this equipment and the process was optimized using an experimental design that included variables such as temperature, pyrolysis time, type of catalyst, and process atmosphere. The obtained material was characterized by using FTIR, DRX and SEM for microstructural characterization and EDS technique for chemical analysis.