基于微电压调节的太阳能充放电系统设计

基于微电压调节的太阳能充放电系统,是以微控制器LPC1114为核心的太阳能电池板充放电电路,是实现高效率的智能充放电设计方案。微电压调节理论整合了经典电压回授法和多种太阳能最大功率点追踪思想,利用简单合理的DC／DC平衡技术,充分考虑系统功耗等问题,以简单的电路设计和创新的软件思想实现更高效率的太阳能系统。随着能源危机的加剧,高效率、低成本的太阳能系统备受社会关注,其在民用、交通等领域的运用也更加重要。     

基于IPv6的无线高原冻土监测系统

设计了一种新型的高原冻土监测系统。采用ARM7内核的MCU进行控制,并基于IPv6协议利用IPv6技术和GPRS技术相结合的方式,建立了可自组网的无线传感器网络,实现了对指定区域环境参数的实时监测。系统使用了多个土壤水分传感器、温度传感器、二氧化碳传感器、氮气传感器对高原冻土环境进行全方位实时观测。各监测点将数据通过基于IPv6的无线网络传送给汇聚节点,汇聚节点再通过GPRS网络将数据传送给监控中心。监控中心可以对数据进行记录和分析,更好地指导环境保护和建设工作。     

An improved bacterial foraging algorithm for combined static/dynamic environmental economic dispatch

Economic dispatch is carried out at the energy control center to find out the optimal output of thermal generating units such that power balance criterion is met, unit operating limits are satisfied and the fuel cost is minimized. With growing environmental awareness and strict government regulations throughout the world, it has become essential to optimize not only the total fuel cost but also the harmful emissions, both, under static as well as dynamic conditions. The static environment economic dispatch finds the optimal output of generating units for a fixed load demand at a given time, while the dynamic environmental economic dispatch schedules the output of online generators with changing power demands over a certain time period (normally one day) so as to minimize these two conflicting objectives, simultaneously. In this paper, the price penalty factor approach is employed for simultaneous minimization of cost and emission. The generator ramp rate constraints, non-convex and discontinuous nature of cost function and the large number of generators in practical power plants, make this problem very difficult to solve. Here, a fuzzy ranking approach is employed to identify the solution which offers the best compromise between cost and emission objectives.     

A copper/polyimide Metal-base packaging technology

A unique substrate MCPM (Mitsubishi Copper Polyimide Metal-base) technology has been developed by applying our basic copper/polyimide technology.¹ This new substrate technology MCPM is suited for a high-density, multi-layer, multi-chip, high-power module/package, such as used for a computer. The new MCPM was processed using a copper metal base (110 × 110 mm), full copper system (all layers) with 50-μm fine lines. As for pad metallizations for the IC assembly, we evaluated both Ni/Au for chip and wire ICs and solder for TAB ICs. The total number of assembled ICs is 25. To improve the thermal dispersion, copper thermal vias are simultaneously formed by electro-plating. This thermal via is located between the IC chip and copper metal base, and promotes heat dispersion. We employed one large thermal via (4.5 mm^?) and four small vias (1.0 mm^?) for each IC pad. The effect of thermal vias and/or base metal is simulated by a computer analysis and compared with an alumina base substrate. The results show that the thermal vias are effective at lowering the temperature difference between the IC and base substrate, and also lowering the temperature rise of the IC chip. We also evaluated the substrate’s reliability by adhesion test, pressure cooker test, etc.     

Effect of 0.1 at.% zirconium on the cyclic oxidation resistance ofβ-NiAl

The effect of 0.1 at.% Zr (0.2 wt.% Zr) on the cyclic oxidation of hipped -NiAl was studied. Oxidation testing was performed in static air at 1100–1200 °C, using 1-hr exposure cycles for test times up to 3000 hr. The weight change versus time data were modeled with the COSP computer program to analyze and predict cyclic-oxidation behavior. Zr additions significantly change the nature of the scale-spalling process during cooling so that the oxide spalls near the oxide-air interface at a relatively low depth within the scale. Without Zr, the predominantly -Al₂O₃ scale tends to spall randomly to bare metal at relatively high effective-scale-loss rates, particularly at 1150°C and 1200°C. This leads to higher rates of Al consumption for the Zr-free aluminide and much earlier depletion of Al, leading to eventual breakaway (i.e., failure).     

Mechanical procedure for proof construction via closed terms in typed λ calculus

In this paper is presented an algorithm for constructing natural deduction proofs in the propositional intuitionistic and classical logics according to the analogy relating intuitionistic propositional formulas and natural deduction proofs, respectively, to types and terms of simple type theory. Proofs are constructed as closed terms in the simple typed calculus. The soundness and completeness of this method are proved.     

Sex pheromones of male yellowfin Baikal sculpin (Cottocomephorus grewingki): Isolation and chemical studies

Three components of the male yellowfin Baikal sculpin pheromonal signal have been isolated from urine by diethyl ether extraction, thinayer chromatography (TLC), and high-performance liquid chromatography (HPLC). Using mass spectrometry, we have identified two of them as testosterone (T) and 11-hydroxytestosterone (11HT). These steroids are synthesized in testes during full spermatogenesis, and they are excreted in male urine with milt. The third component is not a steroid. It is more likely to be a polyene alcohol (farnesol). 2Z,6E-Farnesol possesses behavioral activity.     

Measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V) by a microsecond-resolution transient technique

A microsecond-resolution pulse heating technique was used for the measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V). The method is based on rapid (50- to 100-s) resistive self-heating of the specimen by a high-current pulse from a capacitor discharge system and measuring, as functions of time, current through the specimen, voltage across the specimen, and radiance of the specimen. Melting of the specimen is manifested by a plateau in the measured radiance. The time integral of the net power absorbed by the specimen during melting yields the heat of fusion. The values obtained for heat of fusion were 272 J · g^–1 (13.0 kJ · mol^–1) for titanium and 286 J · g^–1 for the alloy 90Ti-6Al-4V, with an estimated maximum uncertainty of ±6% in each value.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

An enhanced,acoustic emission-based,single-fiber-composite test

In the single-fiber-composite (SFC) test, a fiber imbedded in a matrix is loaded in tension, resulting in a fragmentation of the fiber. In the conventional version of this test, the final fiber fragmentation length distribution is used with a micro-mechanical model to determine the average fiber/matrix interfacial shear stress. In the enhanced version of this test, one also determines the applied stress at each fiber fracture, and from this, one can evaluate the strength of the fiber at short gage lengths. In our measurement system, we utilize an acoustic emission (AE) technique to detect the fiber fractures and to locate the fiber breaks and so determine both the fiber failure stresses as well as the fiber fragmentation lengths while the test is in progress. Critical to the success of this test is a broadband AE system that utilizes point-like AE sensors, procedures for evaluatingin situ, the wavespeed of the first wave arrival and signal processing techniques for determining the arrival time of this signal as precisely as possible for a broad range of wave shapes. Here we describe the application of such an enhanced SFC test procedure to investigate the failure of a Nicalon fiber in an epoxy matrix.