Multistage solid-state power amplifier design by a new alternative synthesis technique

For the first time, the numerical real-frequency technique has been applied to the design of a nonlinear power amplifier. This synthesis technique does not require any transistor model by directly using measured large-signal S-parameters of the power transistor device. The double power-frequency dependence of these S-parameters requires the use of a bidimensional interpolation (spline functions). With the Levenberg–Marquardt optimization and large-signal S-parameters, a specific CAD program optimizes the added-power in order to synthesize the matching networks of the PA. The simulated and measured results of two S-band power amplifiers validate the new synthesis approach. © 2004 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14, 87–98, 2004.     

Advances in micro assembly injection moulding for use in medical systems

In micro systems technology, the process of micro assembly injection moulding is used for the generation of hybrid micro systems. With this process, more functions are integrated in less space. In the field of medical technology, miniaturisation also means new methods of treatment with fewer side effects on the patient. New cures are developed by the miniaturisation of medical instruments, such as keyhole surgery. For detailed investigations a specific demonstration was developed to display the potential of micro assembly injection moulding in medical science. This part consists of a carbon-fibre reinforced PEEK puncture needle, which incorporates three lumens. The selected materials allow use of the needle during magnetic resonance imaging. In order to attach additional equipment a plastic connector needs to be overmoulded on the needle. The investigations focus on the injection moulding process by characterising the influences of temperature, moulding parameters and material combinations on the resulting bond strength between needle and connector.     

棉花优质高产抗旱节水技术大田试验研究

按照生态农业工程理论和抗旱节水工程技术要求,对棉花转基因抗旱品种、不同密度、不同基肥N、P的施用量进行田间水分胁迫综合试验.经在关中灌区3年试验研究结果表明:密度以每公顷种植7.5万株比种植4.5、6万株分别增产671.854、83.30 kg,增产57.49%和41.36%.品种陕402(早熟)、陕576(中早熟)分别比中棉所41(中熟)增产16.62%和16.17%.施磷酸二铵比尿素增产,每公顷施1502、25 kg分别增产11.35%和10.53%.抗旱节水农业工程育种和农艺节水工程技术结合,不仅可降低生产成本44%~47%,还可提高产量和品质,增收1 050~5 000元/hm2,同时节约了水资源,保护了农业生态环境.     

紫杉醇硅胶表面分子印迹纳米颗粒的制备

以紫杉醇为模板分子,紫杉醇上的羟基与异氰酸酯丙基三乙氧基硅烷(IPTS)反应形成共价复合物,然后和交联剂正硅酸乙酯(TEOS)通过溶胶-凝胶的方法涂覆在纳米硅胶表面上,以热裂解的方式去除模板分子后形成紫杉醇硅胶表面分子印迹纳米颗粒。通过吸附实验分析研究了紫杉醇硅胶表面分子印迹纳米颗粒的亲和性能,结果表明印迹纳米颗粒对紫杉醇有良好的亲和性。     

电网短路电流限制技术探析

为提高系统运行的安全性及稳定性,降低故障大电流已成为一种迫切需求.文章首先介绍了当前短路电流的发展水平,并对现有的限流技术进行了概述,且简要分析了限流技术中各自的优缺点,最后对限流应用的未来提出了展望.     

创新是企业发展的动力源泉

结合近年来济钢的创新实践,就创新在企业中的四个内涵：观念创新、技术创新、制度和机制创新、管理创新等分别展开讨论,指出创新是企业发展的动力源泉。     

快速高准确度的闪烁探测技术

闪烁探测器具有探测效率高和适于多种条件下应用等优点。但在高计数率测量时,光电倍增管出现的疲劳现象难以克服,其长期稳定性也较差。 本文提出一种措施,使闪烁探测器在每秒10~5个计数脉冲下获得了高的精度和好的稳定性。这项技术已经应用于FT-1型核子低含沙量计中。经测试表明,当每次测量历时为100秒时该仪器的计数精度和8小时长期     

高海拔地区架空送电线路施工技术

介绍了地质条件恶劣的高海拔地区送电线路施工的主要工艺,详细说明了在高海拔地区进行施工测量、导线及避雷线架设、电杆起立以及施工组织管理等应该注意的问题。     

800MPa级别以上含钛低碳贝氏体钢的开发

800MPa级别含钛低碳贝氏体钢因为其经济性的成分设计,在加热制度、轧后冷却工艺上与一般低碳贝氏体钢有一定差别。介绍了该钢种的开发过程与工艺要点。     

宣化钢铁公司循环经济建设与展望

介绍了宣钢在“十五”期间运用生态学规律指导经济活动,本着低开采、低投放、高利用的原则,把清洁生产、资源综合利用融为一体,发展循环经济、转变经济增长方式,走新型工业化道路。改变了传统的“资源一产品一污染排放”物质单向流动的经济发展模式,按照自然生态系统的模式,建立“资源一产品一再生资源”的物质反复循环利用的经济发展模式。通过对生产流程和生产设施的优化、集成与创新,使资源和能源的消耗达到最低,主要技术经济指标得到明显改善,吨钢耗新水降到7．6t,高炉渣自消化率提高到20％,烧结球团尘泥、炼铁尘泥、炼钢尘泥和轧钢系统氧化铁皮利用率达到100％,焦炉煤气放散率、高炉煤气放散率分别达到1％和5％以下。