数字通信系统设计中FPGA的仿真

在大规模的FPGA设计中，由于逻辑过于复杂，给仿真与调试工作带来很大难度。本文结合“实用化综合接入系统”边缘路由器子系统的设计，结合仿真软件提供的接口，提出用测试程序自动生成测试向量，自动完成仿真结果检查的方法，大大降低了仿真与调试的工作量。     

Modeling the continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor

A model of continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor is developed using phase equilibria assumption and the method of molecular weight moments. The model equations can be simplified into a polynomial system that has 17 equations and 17 unknowns. Solution of the polynomial system gives out almost every aspects of the continuous transesterification process. Molecular weight and polydispersity index, end group ratio of hydroxyl to phenyl carbonate, contents of molecular species, and lost diphenyl carbonate fractions are studied in different operation parameters.     

Provision of accuracy for quantitative determination of small amounts of components: Principles of resolving the problem and their realization

Versions are suggested for resolving the problem of monitoring the accuracy of determining small amounts of components in samples of substances and materials. __________ Translated from Izmeritel'naya Tekhnika, No. 1, pp. 52–57, January, 2006.     

Photovoltaic collectors efficiency according to their integration in buildings

A model for building integrated photovoltaic systems has been developed and implemented in a dynamic simulation tool. This tool takes into account the thermal interactions between the PV collector and the building. The influence of the type of integration upon the PV collector efficiency has been evaluated and hybrid PV/air collectors have been studied. An overall efficiency is defined, including the production of electricity and heat. A case study has been performed on two different typical buildings. In the case of a multi-crystalline silicon PV collector integrated on the roof of a single family house located in Paris, the efficiency of unventilated PV modules fixed on the roof is 14%. If the PV collector is used to preheat the ventilation air, the efficiency reaches 20%. A proper building integration also improves the environmental balance of PV technologies over their life cycle.     

Analytic computation of the photocurrent density in a n-6H-SiC/p-Si/n-Si/p-Si0.8Ge0.2 multilayer solar cell

In this work we conceived a model of a multilayer solar cell composed by four layers of opposite conductivities: an n-type 6H-SiC used as a frontal layer to absorb high energy photons (energy gap equals 2.9 eV), a p-type Si layer, an n-type Si layer and a p-type SiGe back layer to absorb low energy photons (Si_0.8Ge_0.2 with an energy gap equal to 0.8 eV). The impurity concentration in every layer of the model is taken equal to 10¹⁷ cm⁻³ to ensure abrupt junctions inside the cell. The optical properties of the separate layers have been fitted and tabulated to be used for thin films devices numerical simulation. We developed the equations giving the minority carrier concentration and the photocurrent density in each abscissa of the model. We used Matlab software to simulate and optimize the layers thicknesses to achieve the maximum photocurrent generated under AM0 solar spectrum. The results of simulation showed that the optimized structure could deliver, assuming 10⁵ cm/s surface recombination velocity, a photocurrent density of more than 53 mA/cm², which represents 88.3% of the ideal photocurrent (59.99 mA/cm²) that can be generated under AM0 solar spectrum.     

增加黄金储备规避外汇风险

近几年，我国外汇储备逐年增加，而美元汇率偏弱，使我国承担很大的外汇风险。为了规避外汇风险，应增加黄金储备。文中提出了我国增加黄金储备总量的理由以及增加黄金储备的途径。这些建议具有可操作性，可以提供给有关部门参考。     

Molecular Simulation Study for CO2 Clathrate Hydrate

The present work has concentrated on the structure of CO₂ hydrate in the NPT ensemble using SPC (simple point charge) intermolecular potential model of water by the Monte Carlo (MC) molecular simulation. A mixture of water and CO₂ placed arbitrarily in a cubic cell has been used as a model system to simulate the CO₂ clathrate hydrate at temperatures ranging from 150–280 K and pressure up to 10 MPa. The result shows that the obtained MC simulation agrees well with the results obtained by molecular dynamic (MD) simulation. The present work is also directed to the study of structure with TIP4P potential model of water.     

微波站微电子设备的防雷措施

通过分析雷电对微电子设备的影响及雷害侵入微波站的方式，提出采用有效的防立击雷系统与由“分流-均压-屏蔽-接地-接口保护”相结合的系统防护方案，来保护微波站的电子设备。     

二元复合驱阶段见效特征

针对孤东油田油藏条件，通过室内试验研究，确定了以胜利石油磺酸盐为活性剂主剂和聚合物的二元复合驱油体系，通过两者之间的协同效应，增加水驱波及体积和洗油效率。该体系在孤东油田七区西馆上54—61层进行试验，取得了较好的阶段性降水增油效果。本文分析了复合驱见效特征和影响见效因素，为下步跟踪分析调整具有指导意义。     

Numerical simulation of substrate effects on spinodal decomposition in polymer binary mixture: Effects of the surface potential

The surface-directed spinodal decomposition (SDSD) of polymer binary mixture with different values of surface potential is numerically simulated in three-dimension (3D) by cell dynamic systems (CDS). Furthermore, the growth laws of the wetting layer are theoretically analyzed by the current equation and the dynamical scaling. The results show that the thickness of the wetting layer increases with the increasing surface potential. The crossover, which is later for larger values of surface potential, appears in the evolution curve of the wetting layer. Before the crossover, the growth law is the surface potential dependant growth law. Subsequently, the growth law is the typical Lifshitz-Slyozov (LS) growth law. The results indicate that the surface potential can result in the mutual transformation between completely wetting and partially wetting for the substrate interface. It can be found that the higher surface potential leads to the faster and stronger transmission of the effect of the substrate on the spinodal decomposition in the bulk.