图像处理建立混凝土有限元模型探讨

针对工程中常用的混凝土材料的不均匀特性,提出了一种基于图像处理技术建立二维混凝土有限元模型的方法.该方法综合图像处理过程中的图像增强、消除噪声和边缘检测技术建立人机对话平台,并结合网格自动划分技术建立非均匀有限元模型.通过一个实例,验证了该方法的有效性.     

TYPHOON PROCESS AND ITS IMPACT ON THE SURFACE CIRCULATION IN THE NORTHERN SOUTH CHINA SEA

A severe typhoon Utor,occurring between July 3 and 8,2001,brought heavy rainfall,strong wind and storm surge.Utor was responsible for tremendous destruction and economic losses in Philippines,Taiwan and Guangdong.An air-sea model system (MM5 and Princeton Ocean Model(POM))was built to simulate meteorological dynamics and ocean circulation in the South China Sea(SCS).In the POM the output of MM5 was used as the input data.With an increased number of vertical levels,a high-resolution planetary boundary layer scheme and updated landuse/vegetation data,the accuracy of computing wind,temperature and other meteorological fields are improved in near surface and upper levels in MM5 simulations.The simulated trajectory and wind speed of Utor are close to the observed results.The simulated distribution of rainfall is accorded well with measured data in the Pearl River Delta(PRD)area.At different meteorological stations in Hong Kong,the wind,temperature and sea surface pressure are well simulated.The simulated ocean surface current and surface temperature fields have an obvious rightward-biased response to the typhoon Utor,and the maximum velocity and the lowest temperature region appear in the 30 km of the right side of the typhoon track.The typhoon Utor could make the water 50m under the surface ocean unwell to surface and the ocean surface temperature decrease by about 2°C.     

Nonsmooth identification of mechanical systems with backlash-like hysteresis

Backlash-like hysteresis is one of the nonsmooth and multi-valued nonlinearities usually existing in mechanical systems. The traditional identification method is quite difficult to be used to model the systems involved with such complex nonlinearities. In this paper, a nonsmooth recursive identification algorithm for the systems with backlash-like hysteresis is proposed. In this method, the concept of Clarke subgradient is introduced to approximate the gradients at nonsmooth points and the so-called bundle method is used to obtain the optimization search direction in nonsmooth cases. Then, a recursive algorithm based on the idea of bundle method is developed for parameter estimation. After that, the convergence analysis of the algorithm is investigated. Finally, simulation results to validate the proposed method on a simulated mechanical transmission system are presented.     

灾害中生活类物资的供应分析——以汶川地震重灾区物资供应为例

救灾生活类物资在供应中面临着优化运输路线、降低运输成本、缩短运输时间3个难题。文章采用相关机会多目标规划模型,以汶川地震为例,总结并完善了自然灾害救助中的多物资的协作供应模式,为突发性重大灾害中多物资的协作供应的组织、实施、管理提供参考支持。     

一种消除阶梯效应的图像分解新模型

针对TV-L1分解模型在进行图像分解时所得到的结构部分有阶梯效应的问题,本文提出一种改进的图像分解模型即GJTV-L1模型。该模型首先得到结构部分的切向量场,由切向量场可得到结构部分的法向量场,然后拟合法向量场得到重构图像,即结构部分。通过仿真实验,验证了GJTV-L1模型和算法的合理性及有效性。     

用融和丰富字特征的不等式平滑最大熵模型消解组合型歧义

重点在于融和丰富字特征作为消歧知识以提高分类性能和引入不等式平滑技术来克服数据稀疏问题,同时不等式平滑技术还使特征选择嵌入到参数估计过程中,显著压缩模型规模。     

战略网络形成动因之制造模式篇

本研究目的在于探究战略网络生成中制造模式的推动作用。文章首先分析了制造模式在技术经济范式变迁中扮演的角色,总结出制造模式与技术经济范式之间的关系,接着运用数学抽象和哲学思辨的方法,提炼出人类历史上三次制造模式对技术经济范式的价值实现函数。基于该函数研究发现:精益生产中目的在于充分调动人的主观能动性,以实现人的解放的复合机制——现场管理、劳工关系管理和知识管理等体系是制造模式未来的发展方向;战略网络的演进服务于制造模式的价值实现功能,它的生成是为了弥补制造模式柔性不足的缺陷。     

一种改进编码器角度解算过程的方法与实现

在机械电子一直是一个热门学科,其目的是通过软件控制机械操作来代替机械的哑巴解决方案。DS-25旋转电子编码器能够很好地与机械电子应用相匹配,其输出为两路标准的sine和cosine曲线,通过分析sine和cosine数值来计算编码器所对应的绝对角度位置。通过对DS-25的工作模式分析和实际应用情况提出角度解算的改进方案,该方案利用DS-25工作于粗略模式下测试到的角度值来推算精确模式下的信号周期,结合精确模式下测试到的角度值来计算编码器所对应的绝对角度。摒弃其原有的复杂查表过程进而节省电子表格的存储空间,在降低硬件成本的同时提升了软件灵活性。实验证明,算法的改进能够节省约2KB的存储空间,角度位置误差能控制在1‰以内。     

Monitoring land surface processes with thermal infrared data: Calibration of SVAT parameters based on the optimisation of diurnal surface temperature cycling features

Land Surface Models (LSM) have been designed to describe water and energy transfers at the soil-vegetation-atmosphere interface, and are therefore essential in many environmental disciplines. These numerical models, driven by the boundary conditions in the atmosphere and in the soil, require adequate knowledge of those vegetation and soil characteristics which are determinant in the characterisation of mass and energy transfers. In view of the fact that, firstly this information is often only partially known, and secondly the transfers are sometimes incorrectly represented, these models can rapidly drift and need to be regularly corrected. To this aim, remote sensing is a promising tool and many studies are currently devoted to the development of assimilation techniques to control their inputs or internal variables. The research presented in this paper contributes to this effort. Its ambition is to explore new methodologies, designed to make use of remote sensing thermal infrared data recorded from space. This study is based on the analysis of links between the characteristics of the diurnal cycle of the surface brightness temperature and the soil-atmosphere interface parameters and variables. The proposed methodology takes advantage of these temperatures cycling features, instead of absolute temperature values, to calibrate the LSM. The results show that the model parameters have a significant impact on the diurnal temperature dynamics, sometimes to a greater extent than on the temperature itself, and that these relationships have diurnal and seasonal variations. As a consequence, the use of TIR data for LSM calibration can be optimised by considering only those parts of the information which are really relevant to parameter calibration.     

An extension of likelihood-ratio-test for testing linear hypotheses in the baseline-category logit model

A new family of test statistics for testing linear hypotheses in baseline-category logit models is introduced and its asymptotic distribution is obtained. The new family is a natural extension of the classical likelihood ratio test. A simulation study is carried out to find new test statistics that offer an attractive alternative to the classical likelihood ratio test in terms of both exact size and exact power.